Electrical Controls Designer
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
- Ensure all Hanwha Philly Shipyards safety procedures, rules and regulations are performed and met
- Perform basic and detail design activities for assigned systems, including calculations, diagrams, drawings, design change notices, and equipment selection relevant to assigned systems
- Assigned Systems, including but not limited to Alarm and Monitoring, Fire Detection and Alarms, and Alarm Signaling Systems
- Participate in basic and detail design activities within the Electrical Design Department, including review of design documents from other shipyard engineers, vendors, and external design partners
- Coordinate and assist the fabrication, assembly, installation, and/or testing of assigned systems, and equipment
- Prepare technical specifications, collect vendor information and maintain makers list for assigned systems
- Generate and access Bills of Material and provide technical support for material tracking, logistics, handling, and timing of installation
- Propose technical improvements; develop and implement quality standards applicable to assigned systems
- Interface with Owner and Class to resolve technical issues
- Develop testing procedures for assigned systems
- Provide field engineering support as required to support production activities during Class and owner inspections or responding to production questions arising during vessel construction
- Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to assigned systems
- Perform other related duties as required and assigned
- Able to communicate effectively with all levels of the organization, both verbal and written
- Decision making/problem solving
- Organizational understanding
- Willingness and ability to work as a team member
- Conflict resolution
- Strategic thinking
- Stress management
- Teamwork
- Bachelor's Degree in Automation and Electronic Systems is preferred; however, candidates with a technical diploma and 10+ years experience in ship design and/or construction may also be considered
- Minimum 10 years experience in shipbuilding, Automation and Electronic Systems Specialization, or manufacturing
- Experience with Automation System or Control system design and construction
- Proficiency with MS Office and CAD systems such as AutoCAD
- Knowledge/experience concerning basic and detail ship design
- Knowledge/experience concerning modern shipbuilding practices
- Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as international experience or familiarity with European and/or Asian Shipbuilding Standards
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Electrical Controls Designer in Clayton, NJ vacancy
- ...Controls EngineerThe company is a German non-ferrous wire & cable drawing machinery manufacturer for the... ...a Controls Engineer with a strong background in electrical engineering and automation systems to support the design and development of our equipment.Position SummaryThe...Suggested
$105.57k - $134.6k
...Description: Engineer I, Controls Medical Manufacturing Technologies (MMT) |... ...cant. Specializing in automation, machine design, material handling, and custom tooling,... ...Responsibilities Design & Development: Create electrical and electromechanical systems, including...SuggestedFull time$120k - $130k
...Description Job Description Job Title: Electrical Engineer Location: On-Site – Monroe... ...the Technology & Innovation team to design and implement innovative electrical solutions... ..., including wiring, connectors, and control systems, tailored to marine environments...SuggestedWork at officeLocal areaRemote work$110k - $118k
...Process Controls EngineerPay Range: $110,000 - $118,000Location: West Deptford, NJ, USAt Johnson Matthey, your work will matter. As... ...requirementsIdentifying and delivering improvements to instrumentation, electrical and control system performanceSupporting OT cybersecurity...SuggestedRemote workFlexible hoursShift work- ...Electrical Design Engineer Position Summary: The Electrical Engineer will provide electrical engineering support to the Land Based... ...structure/inter-relationships Have familiarity with electrical control systems Familiarity with Navy Shipboard Electric Plant...SuggestedContract workFor contractorsWork at officeImmediate startFlexible hours
- Adjunct Faculty Positions in All Areas of Electrical and/or Computer Engineering Adjunct Faculty Positions... ..., electronics, power electronics VLSI design, chip design, advanced chip manufacturing, solid‑state systems Control systems Signal and image processing Communication...Part timeVisa sponsorship
$17 - $24 per hour
...promise of a safe place to live, work, and play behind pest controls best-known brand . Be part of a purpose-driven team with... ...highest level of protection and service to their customers on a designated service route. Their career starts with in-depth, award-...Hourly pay- ...Job Summary We’re looking for a hardworking Instrument and Control Maintenance Technician to join our team! Responsibilities include... ...Frequency Drive (VFD) configuration ~ General Experience in Electric Instrumentation such as Coriolis meters, Mag flow meters, RTD...Night shiftWeekend work
$110k - $130k
...The Electrical Engineer II – Cable Routing & Analysis will support the design and development of electrical cable routing systems for Holtec's SMR-300 advanced nuclear... ...for electrical power, instrumentation & controls (I&C), and communications systems. The engineer...Full timeImmediate startFlexible hours- ...Job Description Job Description Electrical Project Manager Join Our Growing Team... ...methods, contracts, scheduling, and project controls. Experience managing project budgets,... ...30 Certification Experience with Design-Build and Design-Assist projects Experience...Contract workFor subcontractorWork at office
- ...Duties Help You will determine placement of electrical distribution panels and other equipment.... ..., systems, generators, switchboards, or control equipment in a shipyard environment. You... ...access to a range of benefits that are designed to make your federal career very...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$101.7k - $167.68k
...instrumented systems (SIS), programmable logic controllers (PLC), and field relay logic. The... ...Engineer will have Process, Controls, Electrical, Mechanical acumen to lead and... ...Maintenance disciplines to improve or correct designs, installations, and increase plant equipment...Full timeWork experience placement- ...perspectives are valued. Our state-of-the-art, 25,000 sq. ft. climate-controlled facility is a hub for innovation and collaboration, empowering... ..., you will train and assist in the fabrication, assembly, electrical wiring, controls programming and servicing of machines and...Full time
- ...Job description: Duties and Responsibilities: Manage electrical projects using estimate, plans, and project management methods.... ...field. ~ Prior on-site field work experience preferred. We are a Design/Build company and attention to electrical installations and code...Full timeFor contractorsWork experience placementFor subcontractorWork at officeLocal areaRemote workMonday to FridayFlexible hours
$128.5k - $185k
...Responsible for the design, development and implementation of standards, methods and procedures... ...to assembly, process, mechanical, electrical, electro-mechanical systems, field and... ...Responsibilities Develop and implement quality control processes, procedures, and policies to...For subcontractorLocal areaFlexible hours- ...general supervision of the shift supervisor, performing all electrical maintenance on equipment to maximize productivity while maintaining... ..., including, but not limited to, motors, regulators, controllers, generators, switches, etc.Inspect electrical equipment and machinery...Temporary workCurrently hiringLocal areaImmediate startFlexible hoursShift workNight shiftDay shift
- ...in ensuring the seamless operation of electrical circuits and systems.ResponsibilitiesInspect... ...systems, motors, generators, controllers, switches, and related equipment.Assemble... ...spending accounts, PTO, and other programs designed to promote well-being, work-life balance...Hourly payPermanent employmentFlexible hoursShift work
- .... This in-office position focuses on providing hands-on experience through various roles, including project management and quality control, while serving multiple industries primarily commercial and public. The ideal candidate will possess a bachelor's degree, relevant...InternshipWork at office
- ...contracting services. PULLMAN's capabilities include specialty design-build services for new and existing structures, as well as a wide... ...rate tracking Estimating Budget preparation and project cost control Safety management Quality control Business development and...Temporary workFor contractorsWork experience placementInternshipWork at officeLocal area
$105.59k - $180.17k
...trade on moderate size and complex projects to determine that Contractor's construction activities are monitored and controlled in accordance with design plans, specifications, and contractual requirements. Responsible for assisting with the resolution of project issues...Full timeContract workFor contractorsWork at office- NDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other design projects. Position to be performed on-site at our Thorofare, NJ, office.The ideal candidate will have experience in design...For contractorsFor subcontractorWork at office
$105k - $115k
...platforms. Our PowerBuoy® platforms provide clean and reliable electric power and real-time data communications for remote maritime and... ...development program execution by performing detailed engineering design and analysis activities. Responsibilities: Support...Full timeLocal areaRemote work- The Electrical Technician / Industrial Electrician is a hands‑on role responsible for keeping our production and facility electrical systems... ..., troubleshoot, repair, and maintain electrical equipment, controls, and instrumentation across production and facility systems...
- ...Develop RFP (Requests for Proposals) for external services. Design and maintain project and technical documentation. Document project... .... Do you have? Solid Understanding of Statistical Process Controls (SPC) and Statistical Quality Controls (SQC) and techniques....Work at officeImmediate start
- ...submarines, and aircraft carriers. Support design, modeling, analysis, and testing of all... ...new technologies and advanced control systems. Conduct Engineering surveys... ...Bachelor's degree in any mechanical or electrical engineering discipline from an accredited...Hourly payFor contractorsFor subcontractorNight shift
- ...an Applications Engineer/Sales Support professional to blend technical insight with customer-facing service in the industrial flow-control sector. The role involves collaborating with Outside Sales, handling inquiries, and driving successful project orders. The ideal candidate...
- ...implementation. Proactively and effectively communicate with multiple stakeholders including, but not limited to, leadership, operations and the maintenance team on technical issues and project timelines and production impacts.Manage the controls-related budget for the site....
- ...Service Technician who possesses mechanical abilities with electrical controls experience. We are looking for an individual who is efficient... ...record. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities,...Full time
- ...hands-on engineering. In this role, you'll design, implement, and optimize automated and... ...involving PLCs, robotics, motion control, machine vision, and automated test systemsLead... ...'s degree in Engineering (Electrical, Controls, Mechatronics, Manufacturing,...Work at officeImmediate start
- ...bridge, and infrastructure projects. The role oversees field inspection teams, enforces contract plans, and ensures safety and traffic control. The candidate should have NICET IV certification or 10+ years of experience in heavy highway construction management and...Contract work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Controls Designer. Be the first to apply!



