Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

QA/QC Inspector I

$29.98 - $38.79 per hour

ACCO Engineered Systems

Job Description Job Summary: The QA/QC Inspector I performs visual inspection and verification of material, equipment, piping systems, welding, and brazing installation work on assigned projects and in fabrication shops and records each result as objective evidence. The position works to project specifications, ASME piping codes, manufacturer requirements, and customer site requirements, under the direction of the assigned QA/QC Inspector III and within ACCO's welding program requirements. QA/QC Inspector I is the entry inspection level, below Inspector II and III. Assigned alone to a project or shop, this position performs the inspections in its scope and produces a complete, retrievable record of each one, working to an inspection plan set by the QA/QC Area Supervisor or the assigned Inspector III rather than writing that plan itself. Where an Inspector II or III is also assigned, daily technical direction comes from them; where neither is, it comes from the next QA/QC manager in line. QA/QC supports fabrication, installation and project management. Those groups are this position's customers inside ACCO, and what they build is what reaches the contractual customer. The position works as part of the project team - available, responsive, and practical about how the work gets built - not as an outside check on it. Findings are raised to be resolved. Getting to the work early, before it is covered, is part of the job. Field and shop personnel take day-to-day direction from local project leadership (Project Management, Foreperson, General Foreperson, or Superintendent) on a dotted-line basis: where to be, when, and how the day is coordinated, with site adherence to appropriate conduct and safety in mind. Inspection decisions, acceptance and rejection, and the quality record run through the QA/QC line to the assigned QA/QC Inspector III, then the QA/QC Area Supervisor and the QA/QC Regional Manager. Where the two pull against each other the QA/QC line governs the quality decision, and the conflict is raised the same day rather than settled on site. Essential Duties and Responsibilities: Inspection Perform visual examination of welded, brazed, soldered, and mechanical joints, including grooved couplings, press fittings, flanges, and threaded connections. Inspect pipe fit-up, alignment, joint preparation, cleanliness, support and hanger installation, and general workmanship. Perform receiving inspection of material and equipment against the submittal, packing list, and required documentation. Perform in-process and final visual inspection of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems. Attend hold and witness points as scheduled, and participate in pressure tests, system walkdowns, punch-list inspections, and pre-turnover verification. Other duties as assigned by QA/QC leadership, in conjunction with the project team. Verification Verify compliance with project specifications, customer site requirements, ASME B31.1, B31.3, B31.5, and B31.9, AWS D1.1 and D1.3 where applicable, manufacturer requirements, and ACCO procedures. Verify that the welding procedure specification in use is approved and applicable, and that welder qualification and continuity are current for the process in use. Verify material traceability - heat numbers, material test reports, and lot identification - for the work inspected. Verify that measuring and test equipment in use is within its calibration period. Documentation Submit a daily inspection report with photographs on every project day worked, filed to the project QA/QC folder the same day. Complete inspection records, weld maps, fit-up logs, brazing logs, torque logs, and visual inspection records legibly and contemporaneously with the work. Document nonconforming conditions with enough description, location, and photographic evidence that a reader who was not present can understand what was found. Maintain personal certification and training records current, and act on expiry notifications when received. Team and safety Communicate findings clearly and professionally to the Foreperson, the Superintendent, and QA/QC leadership. Support the Inspector II and Inspector III on assigned projects and accept work direction from them. Participate in ACCO's safety programs and demonstrate a commitment to a goal of ZERO injuries or incidents. Quality Authority Identify and document nonconforming material, workmanship, or documentation and bring it to the assigned Inspector III. Issuance and disposition of a nonconformance report are decided by the QA/QC Area Supervisor or above jointly with the Project Team. Place a hold on the specific work being inspected, and require that work not proceed past an inspection point until the inspection is performed. Reject material at receiving that does not match the submittal, specification, or required documentation. Stop and immediately notify the Inspector III and Project Manager where work in progress presents an immediate quality or safety risk. Raising a quality concern is a required part of this job and is protected. Direction from production supervision does not override an inspection requirement. Limits of Authority This position does not: Qualify welders or brazers, or witness qualification testing as the certifying examiner. Approve, revise, or issue welding procedure specifications or procedure qualification records. Serve as the Certified Welding Inspector of record. Approve repairs, deviations, waivers, or field changes to the approved design or procedure. Issue or disposition a nonconformance report or sign turnover documentation or a final quality letter. Position Requirements (Work Experience, Skills, Licenses, etc.): Three (3) or more years of experience in construction or fabrication quality control. One to two (1-2) years of that experience on semiconductor, high-purity, cleanroom, data center, or comparable technically demanding projects - cleanroom piping, process utilities, tool hook-ups, or chemical and gas systems. Current ASNT or ACCP VT Level I or Level II certification - the level set by the assigned duties and project requirements - meeting the ACCO Standard Written Practice and examination requirements, with approval by the ACCO ASNT Level III. Annual Jaeger J1 near-vision examination. Ability to read and interpret isometrics, P&IDs, shop drawings, specifications, and inspection reports. Working knowledge of weld and braze visual acceptance criteria, mechanical piping systems, and high-purity cleanliness and workmanship standards. Ability to write clear, factual inspection reports; regular and routine attendance. Valid driver's license and reliable transportation to assigned project sites. Education and Experience : Desired : Familiarity with PT, MT, UT, and RT sufficient to read a third-party examination report and understand what was examined, against what criteria, and with what result. ACCO does not perform these methods; certification to perform them is not required. OSHA 10 or OSHA 30, confined space, and first aid / CPR. Experience with Box, Bluebeam, Smartsheet, Procore, PlanGrid. Conversational Spanish. ACCO Competencies: Proactivity/Initiative : Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance : Shows wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Motivation/Dedication : Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility, and shows personal humility. Technical Curiosity/Willingness to Learn : Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. Insight : The ability to gather and make sense of information that suggests new possibilities. Engagement : Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. People Skills : Is approachable and gains the mutual trust and respect of others. Understands people's strengths & weaknesses and actively seeks to understand other perspectives. Communication : Fosters open, honest, candid and respectful communication. Effectively assesses, defines and communicates issues in a timely manner, both written and verbal. Teamwork : The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture : Understands and contributes to the organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Problem-Solver : Ability to identify, analyze, and solve problems in support of personnel, group, department, or organizational objectives. Execution : Effectively takes a vision and translates into action by including the right people. Identify and remove barriers, when possible, to achieve results. Demonstrates appropriate compromise, effective time management, prioritization practices and holds team members (including themselves) accountable for their performance/conduct. Professionalism : Respectfully observes and challenges the status quo with intent for improvement. Can take direction, accept feedback, and take full responsibility for their actions. Lead by example through positive influence and ethical leadership with consideration of the entire organization. Job Responsibility Level: No direct reports Travel Requirements: Travel based on business needs to and from the primary office, regional branch offices, fabrication facilities, and project sites. Work location varies by assignment; overnight travel may be required. Hours: Non-exempt, hours and shift schedule following area project requirements and in accordance with applicable law. Overtime, shift work, and weekend coverage occur based on project schedule and are compensated in accordance with company policy and applicable law. Hours worked are recorded accurately, including time spent traveling between sites during the workday. Physical Demands: The physical demands described are representative of those that must be met to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequently lift and/or move up to 10 pounds; occasionally lift and/or move up to 25 pounds. Jaeger (J1) near-vision acuity, examined annually; close and distance vision with the ability to adjust focus. Regularly required to walk, climb stairs, sit, stoop, kneel, crouch, or crawl. Access active construction sites and fabrication shops, including elevated work areas and confined spaces, using required fall protection and personal protective equipment. Competitive Wages: $29.98 to $38.79 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. Compensation and Offerings: We offer a highly competitive compensation package. For this role, the total rewards may potentially include: Sign-On Bonuses : Paid out after 6 months of employment for the following roles (void if role expectations are not met) Inspector I = $2000 Inspector II = $3000 Inspector III = $4000 Area Supervisor = $5000 Pay Rate Reviews : Annual reviews and increases Discretionary Performance Bonus : Regular performance evaluations w/ Discretionary Performance Bonuses Relocation Assistance : Relocation packages for qualified roles Per Diem & Subsistence : Competitive per diem allowances provided for project-based roles to support housing needs.

#ACCO

#LI-AN1

About Us Why join ACCO? ACCO Engineered Systems is one of the largest mechanical contractors in the country. Since 1934, owners and builders have selected ACCO to design, install, and maintain more than 250,000 mechanical projects. ACCO is dedicated to the design, fabrication, installation, maintenance and service of commercial and industrial HVAC, refrigeration, plumbing, process piping, and building automation systems. Whether your project is a low or high-rise office building, a shopping mall, hospital, semi-conductor fabrication facility or pharmaceutical manufacturing plant...ACCO can design, build, install, and maintain a mechanical system to meet your needs. Here at ACCO, we are a part of something bigger. Just ask our customers: California Academy of Sciences, L.A. Live, and San Francisco 49ers Stadium. While we have been around for 80+ years, we continue to grow at a dynamic pace. And we are looking for talented individuals to join our team. What's great about working at ACCO is that we're a big enough company to be the leader in HVAC mechanical contracting in California and the Southwest U.S., but as a 100% employee-owned ESOP, we're a private company with a family-oriented feel. Several of our employees have worked at ACCO for twenty-five, thirty, and even over forty years! Together, the employees of ACCO are comprised of intelligent, dedicated, and entrepreneurial team members who put customers first and enjoy what they do.

ACCO IS AN EQUAL OPPORTUNITY EMPLOYER AA M/F/V/D.

We proudly hire U.S. Military Veterans, and those qualified are encouraged to apply. Equal Employment Opportunity is The Law.|Pay Transparency Nondiscrimination Provision ACCO will consider qualified applicants with criminal histories for employment. Notice to Outside Recruiters: Hiring managers are not authorized to review or accept recruiting agreements from any outside recruiting agencies. Outside recruiting agencies should not submit unsolicited resumes without signing the company's recruiting agreement. ACCO Engineered Systems

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the QA/QC Inspector I in Sparks, NV vacancy
  • $38.28 - $48.13 per hour

    Job Description Job Summary: The QA/QC Inspector II plans and performs the inspection of an assigned project, system, or shop scope and owns the resulting record set. The position represents ACCO for pipe and equipment installation, welding and brazing inspection, and... 
    Suggested
    Hourly pay
    Temporary work
    For contractors
    Work experience placement
    For subcontractor
    Work at office
    Local area
    Immediate start
    Shift work
    Night shift
    Weekend work

    ACCO Engineered Systems

    Sparks, NV
    1 day ago
  •  ...process materials, finished products, incoming raw materials, etc. Inspector I may be assigned to work given day.in any area in which he/she...  ...on the needs of the department, generally only works in one QC inspection area. (OVERNIGHT) Requirements: ESSENTIAL DUTIES AND... 
    Suggested
    Night shift

    Energy Jobline ZR

    Sparks, NV
    1 day ago
  •  ...weekly basis.  Reads, understands and implement SQF International Food Safety program guidelines.  Be the 1st backup person for QC Assistant’s role to ensure all aspects of that role are covered and accounted for in that person’s absence.  Manage staff of QC... 
    Suggested
    Work at office
    Immediate start
    All shifts

    LaborMax - Sparks, NV

    Sparks, NV
    3 days ago
  • $42 - $57 per hour

     ...respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with... 
    Suggested
    Hourly pay
    Work at office
    Relocation package
    Shift work

    Dassault Falcon Jet

    Reno, NV
    1 day ago
  •  ...QA Inspector VEKA is hiring a QA Inspector to support quality assurance within our Reno manufacturing operation. This role is responsible for inspecting extruded products, completing dimensional and quality checks, documenting results, and working closely with production... 
    Suggested

    Northern NV Jobs

    Reno, NV
    1 day ago
  •  ...As a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of products. You will inspect materials, parts and products at different stages of production. Responsibilities: Approves incoming materials... 

    Anixter, Inc. Shipboard

    Reno, NV
    1 day ago
  •  ...As a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of products. You will inspect materials, parts and products at different stages of production. Responsibilities: Approves incoming materials by confirming... 
    Immediate start
    Worldwide

    Wesco

    Reno, NV
    3 days ago
  •  ...Quality Control Inspector I Do you have a keen eye for detail? We are looking for you! The Quality Control Inspector I is responsible for ensuring that incoming parts, in-process production, and final products meet all specified quality standards. This role involves... 
    Work at office

    Sierra Nevada Corporation

    Sparks, NV
    1 day ago
  • $23 per hour

     ...inspection skills and attention to detail to work in medical device manufacturing. Yoh Life Sciences is seeking a Quality Control Inspector for a client in Reno, NV. In this hands-on role, we are looking for candidates with experience in quality inspection, and... 

    Yoh

    Reno, NV
    1 day ago
  •  ...inspection skills in a meaningful work environment that supports and protects explorers and heroes? Join our team! The Quality Control Inspector II performs detailed inspections of materials, parts, and products throughout the production process to ensure compliance with... 
    Permanent employment
    Full time
    For contractors
    Immediate start
    Worldwide

    Sierra Nevada Company, LLC

    Sparks, NV
    1 day ago
  • $30.9 - $42 per hour

     ...Dassault Falcon Jet -Maintenance, Repair and Overhaul (MRO) facility in Reno, Nevada is seeking a full-time Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. Also... 
    Hourly pay
    Full time
    Work at office
    Relocation package
    Shift work

    Dassault Aviation

    Reno, NV
    1 day ago
  •  ...Polypropylene (PP) • Polyvinyl chloride (PVC) Other specialty process piping materialsNice to Have Skills & Experience* AWS Certified Welding Inspector (CWI)Experience supporting data center, mission-critical, or semiconductor construction projectsExperience inspecting carbon steel... 
    For contractors

    Insight Global

    Sparks, NV
    4 days ago
  •  ...Electrical QA/QC Manager Redwood Electric Group is seeking an Electrical QA/QC Manager to lead quality assurance and quality control for large commercial and mission-critical electrical construction projects. This position works closely with project management, field... 
    Contract work
    For contractors
    For subcontractor

    Insight Global

    Sparks, NV
    3 days ago
  •  ...Quality Control InspectorThe Quality Control Inspector will be responsible for the inspection, acceptance, documentation, and inventory control of incoming components used in manufacturing. This person will use metrology equipment and engineering drawings to determine... 

    Insight Global

    Reno, NV
    1 day ago
  • $19.13 - $22.96 per hour

     ...Quality InspectorAs a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of products. You will inspect materials, parts and products at different stages of production.Responsibilities:Approves incoming materials by... 
    Immediate start
    Worldwide
    Shift work

    WESCO International

    Reno, NV
    3 days ago
  •  ...QA/QC ManagerThe QA/QC Manager is responsible for development, implementation, and management of the project quality control program...  ...supervises inspections, reports and the documentation issued by inspectors and files the required Quality Records.Responsibilities:Monitor... 
    Contract work
    For subcontractor
    Work at office
    Local area

    Fortis Construction-Oregon

    Reno, NV
    17 hours ago
  •  ...AT PANASONIC ENERGY : Do you want to join a team that's changing the world? Do you have a strong background as a Quality Control Inspector I ? Then Panasonic Energy is looking for you! Check out the job description and apply now! Put your skills to meaningful use, gain... 
    Work at office
    Immediate start
    Flexible hours
    Shift work
    Night shift

    Panasonic North America

    Sparks, NV
    7 hours ago
  •  ...PANASONIC ENERGY :\n \n \nDo you want to join a team that's changing the world? Do you have a strong background as a Quality Control Inspector I ? Then Panasonic Energy is looking for you! Check out the job description and apply now! Put your skills to meaningful use, gain... 
    Work at office
    Immediate start
    Flexible hours
    Shift work
    Night shift

    Energy Jobline ZR

    Sparks, NV
    1 day ago
  •  ...Role & Responsibilities We are seeking 3 QC Inspectors for a mechanical contractor supporting data center construction, which would be a great opportunity for someone with experience in mechanical piping QC inspection and documentation looking to further their career in... 
    For contractors
    Flexible hours

    Averro

    Sparks, NV
    1 day ago
  • $20 per hour

    Job Full Description NEED SOME EXTRA CASH? EXPRESS HAS YOUR BACK! IMMEDIATE OPENINGS - QUALITY CONTROL - USA PARKWAY Looking for a short-term gig to make some extra $$$? 2 Day shifts open $20 per hour! Short-term project - approximately 1 week No heavy lifting! Overtime...
    Hourly pay
    Extra income
    Temporary work
    Immediate start
    Shift work
    Night shift
    Day shift

    Express Employment Professionals Defunct

    Sparks, NV
    1 day ago
  • $48 per hour

    Position Title: Inspector - 1 Location: Sparks, NV - Subject to Change Compensation: $48/hr....  ...directed Complete daily inspection reports and QC documentation accurately and on time...  ...mission-critical projects Familiarity with QA/QC platforms (ACC, CxAlloy, or similar) Exposure... 
    Hourly pay
    Daily paid
    Full time
    For contractors
    Relocation
    Shift work
    Night shift
    Weekend work

    HTSG

    Sparks, NV
    1 day ago
  • Special Inspectors We are seeking experienced ICC-certified Special Inspectors to perform inspection and testing services for public works...  ...office. Must be detail-oriented with a strong commitment to QA/QC and code compliance. Proficiency with Microsoft Office (Outlook... 
    Full time
    For contractors
    Work at office
    Remote work

    Construction Materials Engineers Inc

    Reno, NV
    1 day ago
  • $50 per hour

    Position Title: Inspector - 2 Location: Sparks, NV - Subject to Change Compensation: $50+/hr...  ...manage NCRs through closure Maintain complete QC documentation and provide weekly summary...  ...Mentor Level 1 Inspectors and support QA/QC procedure development Ensure compliance... 
    Hourly pay
    Daily paid
    Full time
    For contractors
    Relocation
    Shift work
    Night shift
    Weekend work

    HTSG

    Sparks, NV
    1 day ago
  • What to Expect This position is an integral part of the Supply Chain Operations organization and will be responsible for managing incoming parts inspections, sorting, rework, material disposition, and oversight of all third party companies performing work on behalf of...
    Hourly pay
    Daily paid
    Full time
    Temporary work
    Flexible hours
    Shift work

    Tesla

    Sparks, NV
    17 hours ago
  • $29.25 per hour

     ...Position: Quality Inspector I Job Description: Arrow Electronics | Reno, NV Shift: 8:30 AM – 5:00 PM, Monday–Friday. Hourly Rate: $29.25 USD Hourly Pay: up to $31.75 USD for hours worked between 6:00 PM – 6:00 AM. Overtime: Regular OT and occasional... 
    Hourly pay
    Full time
    Temporary work
    Work experience placement
    Work at office
    Local area
    Monday to Friday
    Flexible hours
    Shift work

    Arrow ECS

    Reno, NV
    1 day ago
  •  ...Quality Inspector Are you diligent and passionate about maintaining high standards? We're looking for a dedicated Quality Inspector to take a hands-on role in ensuring the quality and reliability of our products. In this role, you will perform well inspections, conduct... 
    Work at office
    Flexible hours

    Emerson Electric

    Reno, NV
    4 days ago
  •  ...Quality Inspectors Have an eye for detail and experience in manufacturing or quality inspection? We're looking for dependable individuals with hands-on experience in product inspections, quality checks, measurements, or production environments. Candidates with related... 
    Temporary work
    Monday to Friday
    Shift work

    Savard Labor

    Reno, NV
    3 days ago
  • $28.07 per hour

     ...Eaton’s ES GEIS BLD division is currently seeking a Quality Inspector (2nd Shift). The hourly rate for this position is $28.07 + .50 shift differential per hour. CORE HOURS: 2:30PM - 11PM What you’ll do: Eaton is looking for Quality Inspector responsible for testing... 
    Hourly pay
    Local area
    Relocation package
    Shift work
    Afternoon shift

    Eaton

    Reno, NV
    17 hours ago
  • $28.07 per hour

     ...Eaton’s ES GEIS BLD division is currently seeking a Quality Inspector (2nd Shift). The hourly rate for this position is $28.07 + .50 shift differential per hour. CORE HOURS: 2:30PM - 11PM What you’ll do: Responsible for operating inspection and test equipment with the... 
    Hourly pay
    Local area
    Relocation package
    Shift work
    Afternoon shift

    Eaton

    Reno, NV
    3 days ago
  • $28.07 per hour

     ...Quality Inspector (2nd Shift)Eaton's ES GEIS BLD division is currently seeking a Quality Inspector (2nd Shift). The hourly rate for this position is $28.07 +.50 shift differential per hour. CORE HOURS: 2:30PM - 11PMWhat You'll Do:Eaton is looking for a Quality Inspector... 
    Hourly pay
    Relocation package
    Shift work
    Afternoon shift

    Eaton Plc

    Reno, NV
    4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to QA/QC Inspector I. Be the first to apply!