Component Engineer, Magnetics
$132k - $240kFull-time
Tesla
What To Expect
Tesla’s mission is to accelerate the world’s transition to sustainable energy. Power electronics, motors, charging, and energy products only work if the magnetics do — cores that do not saturate, windings that do not fail hipot, magnets that hold flux after heat and time. The Supplier Industrialization Engineer (SIE) for Ferrite and Magnetic Components owns the manufacturing process for this commodity. You connect Tesla Design and Reliability to ferrite plants, magnet makers, and winding houses. You are expected to understand both the physics of the magnetic circuit and the furnace, press, grind, and winding process that produce it. You will take ferrites, powder cores, permanent magnets, transformers, inductors, chokes, and wireless-charging coils from material development through PPAP and ramp. You will be in sintering kilns, grind rooms, and winding cells, and you will not leave a yield or magnetic-drift problem as “material variation.” What You'll Do Own industrialization of ferrite and magnetic components from powder and melt through winding, assembly, test, and stable mass production — including MnZn / NiZn ferrites, powder and nanocrystalline cores, sintered and bonded magnets, transformers, inductors, common-mode chokes, wireless-charging coils, and current-sense magneticsDevelop and qualify supplier processes across the magnetic value chain: powder preparation, pressing / injection, sintering or annealing, grinding and gapping, coating, magnetization, winding (magnet wire, foil), impregnation / varnish, termination, and final electrical testLead DFM with Tesla Power Electronics, Motor, and Charging design teams. Close core geometry, gap, winding window, leakage, parasitics, thermal, and insulation issues before tooling and ferrite-tool steel are cutDefine material and process special characteristics: AL / inductance, permeability, core loss (Pcv) vs. B and f, saturation (Bs), Br/Hc for magnets, DCR, leakage inductance, turns ratio, hipot / partial discharge, and thermal agingQualify lines and materials: furnace profiles, atmosphere control, density / shrinkage, grinding capability, gap consistency, winding tension and layering, varnish fill, magnetization fixtures, and 100% or sample electrical test (LCR, B-H, core loss, hipot)Drive APQP and PPAP (or Tesla equivalent), including material certifications, incoming powder / magnet lot control, and process capability on magnetic and dimensional characteristicsAudit ferrite, magnet, and wound-component factories against IATF 16949, VDA 6.3, and Tesla requirements. Extend control into sub-tier powder, oxide, rare-earth, copper, and insulation suppliersLead on-site debug of magnetic drift, high core loss, saturation, noise / magnetostriction, insulation failures, and winding defects. Use first-principles magnetics and process dataTranslate Tesla application conditions (high frequency, high ripple, DC bias, thermal cycling, vibration, humidity) into material selection, process windows, and qualification (AEC-Q200, IEC 60404, IEC View phone number on ev.careers, automotive environmental where applicable)Partner with Purchasing and Design on cost, dual-source, and localization of ferrites, magnets, and wound magnetics without sacrificing B-H performance or reliability. Build capacity and yield models that match Tesla ramp; challenge sintering OEE, grind yield, copper fill, and scrap What You'll Bring Degree in Electrical, Materials, Physics, Magnetic Materials, Manufacturing, or related Engineering, or equivalent experience3+ years industrializing, manufacturing, or qualifying ferrites, permanent magnets, powder cores, or wound magnetic components (transformers, inductors, chokes, wireless-charging coils). Power electronics, EV drivetrain, or high-frequency magnetics preferredHands-on fluency with ferrite / magnet manufacturing (press, sinter / anneal, grind, gap, magnetize) and / or winding processes (bobbin, toroid, foil, litz, impregnation, termination)Working knowledge of magnetic materials and circuit behavior: B-H loops, permeability vs. bias and temperature, core loss, skin / proximity effect, leakage, saturation, magnetostriction, and insulation systemsAbility to specify and interpret magnetic tests: LCR, B-H analyzer, core-loss measurement, impedance / network analysis, hipot / partial discharge, and thermal deratingProven ownership of APQP / PPAP (or equivalent), PFMEA, control plans, MSA, SPC, and Cpk on magnetic and dimensional characteristicsExperience with incoming material control for powders, oxides, rare-earth magnets, magnet wire, and insulation — including lot traceability and aging / humidity sensitivity of ferrites and magnetsStructured problem solving (8D, FTA, DOE) and comfort with data. JMP, Minitab, or Python a plus; FEA magnetics (Maxwell, FEMM) a plusPreferred: EV onboard charger, DC-DC, drive inverter, motor, or wireless-charging magnetics; IATF / VDA audit experience; Six Sigma / CQE Benefits
Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire:
Medical plans > plan options with $0 payroll deduction Family-building, fertility, adoption and surrogacy benefits Dental (including orthodontic coverage) and vision plans, both have options with a $0 paycheck contribution Company Paid (Health Savings Accounts) HSA Contribution when enrolled in the High-Deductible medical plan with HSA Healthcare and Dependent Care Flexible Spending Accounts (FSA) 401(k) with employer match, Employee Stock Purchase Plans, and other financial benefits Company paid Basic Life, AD&D Short-term and long-term disability insurance (90 day waiting period) Employee Assistance Program Sick and Vacation time (Flex time for salary positions, Accrued hours for Hourly positions), and Paid Holidays Back-up childcare and parenting support resources Voluntary benefits to include: critical illness, hospital indemnity, accident insurance, theft & legal services, and pet insurance Weight Loss and Tobacco Cessation Programs Tesla Babies program Commuter benefits Employee discounts and perks program Earned Wage Access: Real-time pay access paid daily, subject to eligibility and schedule (applicable for below Sr. Managers levels) Expected Compensation $132,000 - $240,000/annual salary + cash and stock awards + benefits Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. , Tesla
Tesla’s mission is to accelerate the world’s transition to sustainable energy. Power electronics, motors, charging, and energy products only work if the magnetics do — cores that do not saturate, windings that do not fail hipot, magnets that hold flux after heat and time. The Supplier Industrialization Engineer (SIE) for Ferrite and Magnetic Components owns the manufacturing process for this commodity. You connect Tesla Design and Reliability to ferrite plants, magnet makers, and winding houses. You are expected to understand both the physics of the magnetic circuit and the furnace, press, grind, and winding process that produce it. You will take ferrites, powder cores, permanent magnets, transformers, inductors, chokes, and wireless-charging coils from material development through PPAP and ramp. You will be in sintering kilns, grind rooms, and winding cells, and you will not leave a yield or magnetic-drift problem as “material variation.” What You'll Do Own industrialization of ferrite and magnetic components from powder and melt through winding, assembly, test, and stable mass production — including MnZn / NiZn ferrites, powder and nanocrystalline cores, sintered and bonded magnets, transformers, inductors, common-mode chokes, wireless-charging coils, and current-sense magneticsDevelop and qualify supplier processes across the magnetic value chain: powder preparation, pressing / injection, sintering or annealing, grinding and gapping, coating, magnetization, winding (magnet wire, foil), impregnation / varnish, termination, and final electrical testLead DFM with Tesla Power Electronics, Motor, and Charging design teams. Close core geometry, gap, winding window, leakage, parasitics, thermal, and insulation issues before tooling and ferrite-tool steel are cutDefine material and process special characteristics: AL / inductance, permeability, core loss (Pcv) vs. B and f, saturation (Bs), Br/Hc for magnets, DCR, leakage inductance, turns ratio, hipot / partial discharge, and thermal agingQualify lines and materials: furnace profiles, atmosphere control, density / shrinkage, grinding capability, gap consistency, winding tension and layering, varnish fill, magnetization fixtures, and 100% or sample electrical test (LCR, B-H, core loss, hipot)Drive APQP and PPAP (or Tesla equivalent), including material certifications, incoming powder / magnet lot control, and process capability on magnetic and dimensional characteristicsAudit ferrite, magnet, and wound-component factories against IATF 16949, VDA 6.3, and Tesla requirements. Extend control into sub-tier powder, oxide, rare-earth, copper, and insulation suppliersLead on-site debug of magnetic drift, high core loss, saturation, noise / magnetostriction, insulation failures, and winding defects. Use first-principles magnetics and process dataTranslate Tesla application conditions (high frequency, high ripple, DC bias, thermal cycling, vibration, humidity) into material selection, process windows, and qualification (AEC-Q200, IEC 60404, IEC View phone number on ev.careers, automotive environmental where applicable)Partner with Purchasing and Design on cost, dual-source, and localization of ferrites, magnets, and wound magnetics without sacrificing B-H performance or reliability. Build capacity and yield models that match Tesla ramp; challenge sintering OEE, grind yield, copper fill, and scrap What You'll Bring Degree in Electrical, Materials, Physics, Magnetic Materials, Manufacturing, or related Engineering, or equivalent experience3+ years industrializing, manufacturing, or qualifying ferrites, permanent magnets, powder cores, or wound magnetic components (transformers, inductors, chokes, wireless-charging coils). Power electronics, EV drivetrain, or high-frequency magnetics preferredHands-on fluency with ferrite / magnet manufacturing (press, sinter / anneal, grind, gap, magnetize) and / or winding processes (bobbin, toroid, foil, litz, impregnation, termination)Working knowledge of magnetic materials and circuit behavior: B-H loops, permeability vs. bias and temperature, core loss, skin / proximity effect, leakage, saturation, magnetostriction, and insulation systemsAbility to specify and interpret magnetic tests: LCR, B-H analyzer, core-loss measurement, impedance / network analysis, hipot / partial discharge, and thermal deratingProven ownership of APQP / PPAP (or equivalent), PFMEA, control plans, MSA, SPC, and Cpk on magnetic and dimensional characteristicsExperience with incoming material control for powders, oxides, rare-earth magnets, magnet wire, and insulation — including lot traceability and aging / humidity sensitivity of ferrites and magnetsStructured problem solving (8D, FTA, DOE) and comfort with data. JMP, Minitab, or Python a plus; FEA magnetics (Maxwell, FEMM) a plusPreferred: EV onboard charger, DC-DC, drive inverter, motor, or wireless-charging magnetics; IATF / VDA audit experience; Six Sigma / CQE Benefits
Along with competitive pay, as a full-time Tesla employee, you are eligible for the following benefits at day 1 of hire:
Medical plans > plan options with $0 payroll deduction Family-building, fertility, adoption and surrogacy benefits Dental (including orthodontic coverage) and vision plans, both have options with a $0 paycheck contribution Company Paid (Health Savings Accounts) HSA Contribution when enrolled in the High-Deductible medical plan with HSA Healthcare and Dependent Care Flexible Spending Accounts (FSA) 401(k) with employer match, Employee Stock Purchase Plans, and other financial benefits Company paid Basic Life, AD&D Short-term and long-term disability insurance (90 day waiting period) Employee Assistance Program Sick and Vacation time (Flex time for salary positions, Accrued hours for Hourly positions), and Paid Holidays Back-up childcare and parenting support resources Voluntary benefits to include: critical illness, hospital indemnity, accident insurance, theft & legal services, and pet insurance Weight Loss and Tobacco Cessation Programs Tesla Babies program Commuter benefits Employee discounts and perks program Earned Wage Access: Real-time pay access paid daily, subject to eligibility and schedule (applicable for below Sr. Managers levels) Expected Compensation $132,000 - $240,000/annual salary + cash and stock awards + benefits Pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements dependent on the position offered. Details of participation in these benefit plans will be provided if an employee receives an offer of employment. , Tesla
Vacancy posted 18 days ago
Similar jobs that could be interesting for youBased on the Component Engineer, Magnetics in California vacancy
- ...Description Job Description Description As a Propulsion Component Engineer, you will own all aspects of spacecraft solenoid valve... ...manufacturing drawings Perform fluid, thermal, structural, and magnetic analysis as required Work with the team and external...SuggestedPermanent employmentFull timeFlexible hours
- ...capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: As a Propulsion Component Engineering Intern, you will support the development of flight-critical mechanical and fluid system components, including valves,...SuggestedHourly payWeekly payPermanent employmentInternshipWork at office
$86.8k - $165.2k
...of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and... ...more secure world. Raytheon is seeking a Senior Component Engineer , with an emphasis on magnetic components (transformers, inductors, chokes, coils,...SuggestedContract workTemporary workWork experience placementWork at officeRemote workFlexible hours$125k - $160k
...Components Engineer II Voyager is an innovative space, defense, and national security technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress...SuggestedLong term contractPermanent employmentContract workWork at officeFlexible hours$62.9k - $119.7k
...difference at RTX. What You Will Do: The Parts, Libraries, and Obsolescence Department is looking for individuals to provide Components Engineering support for the circuit card design process, turning designs into robust and reliable reality. Individuals will interface...SuggestedFull timeTemporary workWork experience placementInterim roleInternshipWork at officeRemote workRelocationFlexible hours$82.4k - $123.6k
...everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar... ...ambitious space missions. SPACECRAFT PROPULSION COMPONENTS ENGINEER I We're currently seeking a Spacecraft Propulsion Components...Permanent employmentLocal areaFlexible hours- ...find the best job for you. Position: Industrial Motor Design Engineer Location: Irvine CA Job Detail: Supports the... ...principles Understanding of winding techniques, lamination stacks, magnets, and insulation systems For more information and...Permanent employmentContract workRemote work
$154.5k - $197.9k
Malibu, CAScience & Engineering - Qubit Systems Laboratory - Qubit Systems /Regular /On-siteHRL Laboratories, an IBM company, pioneers the... ...scientific applications.General DescriptionThe Integration Component Design and Analysis Engineer will develop interconnect and integration...Full time$42k - $88k
...opportunities to make a difference at RTX. At Raytheon , the Materials & Process Engineering / Failure Analysis Department provides full-service analysis and test of components as well as circuit card processing, materials manufacturing, testing, qualification,...Full timeContract workTemporary workWork experience placementSummer workInternshipWork at officeRemote workRelocationFlexible hours- ...understandability, and performance of the product? Dynamic, inspiring people and innovative technologies are the norm here. The Component Engineering team at Apple is responsible for identifying, documenting, and releasing efficient electrical components from a variety of...Internship
- ...like the da Vinci surgical system and Ion—have transformed how care is delivered for millions of patients worldwide.We’re a team of engineers, clinicians, and innovators united by one purpose: to make surgery smarter, safer, and more human. Every day, our work helps care...Contract workLocal areaWorldwideFlexible hours
- PCB COMPONENT ENGINEER - SANTA CLARA, CA (HYBRID)We’re looking for a senior PCB Component Engineer with deep expertise in PCB materials and fabrication to serve as the technical authority for a leading builder of high-performance data center networking equipment. This...
$144.02k - $208.03k
...offices in Washington, DC and Huntsville, AL. Join Varda, and work to create a bustling in-space ecosystem.About This Role As a RF Components Engineer II at Varda, you will play a pivotal role in ensuring seamless connectivity between our satellite vehicles and ground...Permanent employment$112.34k - $230k
...recently announced two new offerings leveraging its space station components and the heritage of Haven Demo: Vast Satellite, a high-power... ...long-term space economy.Vast is looking for a Components Engineer, reporting to the Sr. Director of Components, to support the development...Full timeTemporary workRemote work- ...capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: As a Lead Propulsion Component Engineer you will own the development of flight-critical propulsion components—including valves, actuators, and high-performance...Weekly payPermanent employmentWork at office
$90k - $136k
...meaningful work of your career is waiting. Join us.About The Team: The Components team is responsible for all fluid control devices across... ..., enabling a more integrated and informed design approach. Engineers own every aspect of multiple products and integrate with partner...- Senior Electromechanical Component Engineer (Hybrid Santa Clara, CA)An established enterprise networking company is seeking a Senior Electromechanical Component Engineer to support the selection, evaluation, qualification, and lifecycle management of components used in...
$110.88k - $156.23k
...-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. FLUID COMPONENT ENGINEER II The Fluid Component Engineer II plays a key role in the design, build and test of fluid components across the Neutron launch...Permanent employmentLocal areaFlexible hours$133k - $161k
...seeking passionate collaborative energetic and forward-thinking individuals to join our team. We are looking to add a Senior Component Engineer to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for...Permanent employmentFull timeContract workWork experience placementLocal area$140.7k - $175.9k
Malibu, CAScience & Engineering - Qubit Systems Laboratory - Qubit Systems /Regular /On-siteHRL Laboratories, an IBM company, pioneers the... ...scientific applications.General DescriptionThe Integration Component Design Engineer will develop detailed superconducting component...Full time- ...capabilities our nation and its allies need to maintain a durable, asymmetric advantage. About The Role: We are seeking a Components Manufacturing Engineer who will be responsible for establishing, developing, and scaling advanced manufacturing processes for critical...Weekly payPermanent employmentWork at officeFlexible hours
- ...moving forward. If shaping the future of connectivity excites you, you’ll fit right in.Why You’ll Love This RoleThe Mechanical Component Engineer is responsible for the selection, qualification, approval, lifecycle management, and reliability oversight of mechanical...Full timeContract work
$140k - $175k
...Role Description We are seeking a Spacecraft PCB Design Engineer to join our flight program team. This is a full-time, in office... ...Class board assembly standards. Experience with EMI/EMC and magnetics analysis and testing. Experience designing and building wiring...Full timeWork at officeFlexible hours- ...environments. You will be the quality lead for advanced interconnect components and assemblies, including high-speed copper cables, cable... ...and setting fiber standards criteria. Partner with engineering and operations to drive smooth ramp: risk assessments, pilot...Full timeContract work
$140k - $165k
...Job Description Job Description The Senior Components Engineer will support the various projects located in the Pasadena, CA . We... ...one or more of the following areas - RF Parts, Hybrid Parts, Magnetics, Photonics, VLSI Microelectronics, or Passives Parts in...Permanent employmentFull timePart timeWork at officeRemote workFlexible hours$132k - $240k
...What To Expect As a Component Engineer at Tesla, you will own the technical strategy, selection, qualification, and lifecycle management... ...component families (e.g., passives, connectors, power devices, magnetics, sensors, ASICs, electromechanical parts), including...Hourly payDaily paidFull timeTemporary workFlexible hours- ...actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.TOOLING ENGINEER, STARSHIP COMPONENTS (MATERIALS ENGINEERING)SpaceX continues to revolutionize the launch industry by combining advanced technological...Permanent employmentTemporary workWeekend work
- ...seeking a candidate with subject matter expertise to join our Component Quality & Reliability team, driving component quality from concept... ...is a high-visibility role with interfaces across suppliers, engineering, sourcing, global operations, quality leadership, and AMD...Contract work
- ...Job Description Job Description Summary Our client is a growing construction and engineering organization specializing in cleanroom construction, industrial facility development, and mechanical, electrical, and process system installation. They are seeking an...For contractorsFor subcontractorWork at officeLocal areaVisa sponsorship
$140k - $175k
...Motive Workforce is seeking an experienced Spacecraft PCB Design Engineer to support the development, integration, and testing of... ...Class board assembly standards. Experience with EMI/EMC and magnetics analysis and testing. Experience designing and building wiring...Flexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Component Engineer, Magnetics. Be the first to apply!
Related searches






