Instrumentation & Controls Technician
$40 - $45 per hourINSIDER
Overview The Instrumentation & Electrical Technician is responsible for the installation, calibration, troubleshooting, and repair of electrical and instrumentation systems used in nuclear energy applications. This role ensures the safe and efficient operation of equipment by performing routine maintenance and emergency repairs on electrical, instrumentation, and mechanical systems within a highly regulated environment. Key Responsibilities Electrical Duties Install, maintain, and troubleshoot 120V–480V AC electrical systems Wire and troubleshoot motor control circuits (VFDs, contactors, relays, overloads) Read and interpret electrical schematics and panel layouts Work with PLCs – wiring I/O and diagnostics Perform lockout/tagout (LOTO) procedures during maintenance Instrumentation Duties Install, calibrate, and maintain transmitters (pressure, flow, level, temperature) Configure and troubleshoot HART and 4–20mA analog signal loops Maintain and troubleshoot control valves, I/P converters, thermocouples, and RTDs Perform loop checks and assist with system commissioning Maintenance Duties Perform preventive and corrective maintenance on mechanical and electrical systems Support SCADA integration tasks Document all work performed (Excel, Project Manager) Assist with root cause analysis and continuous improvement efforts Tools and Equipment Used Multimeter, clamp meter, megger Loop calibrator HART communicator Hand tools, power tools PLC software (Studio 5000, TIA Portal), SCADA interfaces Qualifications Education & Experience Associate’s degree or technical certification in Electrical, Instrumentation, or Industrial Maintenance 3+ years of industrial electrical or instrumentation experience Familiarity with NEC, ISA standards, NFPA 70 Skills and Competencies Strong knowledge of electrical and control system theory Ability to read and interpret wiring diagrams, P&IDs, and schematics Safety-first mindset with strong troubleshooting skills Comfortable working independently or as part of a cross-functional team Schedule Full-time. May require rotating shifts, on-call duty, or weekend work depending on plant needs. Compensation & Benefits Competitive hourly pay. Overtime available. Health, dental, vision insurance. Salary: $40 - $45 USD #J-18808-Ljbffr INSIDER
$40 - $45 per hour
...Overview The Instrumentation & Electrical Technician is responsible for the installation, calibration, troubleshooting, and repair of electrical and... ...480V AC electrical systems Wire and troubleshoot motor control circuits (VFDs, contactors, relays, overloads) Read and...SuggestedHourly payFull timeRotating shiftWeekend workINSIDER
Hawthorne, NJ2 days ago- Sika is seeking an individual to work on the 2nd shift, focusing on computer control systems related to user specifications and machine operating systems. The role involves maintaining, calibrating, and troubleshooting devices and systems to ensure operational efficiency...SuggestedAfternoon shift
- ...nd shift work schedule and document, analyze and test computer control systems related to user system design specifications and... ...Perform maintenance and calibration activities on devices and instruments. Troubleshoot existing equipment and control systems for efficiency...SuggestedShift workWeekend workAfternoon shift
- Insider, Inc. is looking for an Instrumentation & Electrical Technician to ensure safe and efficient operation of equipment in nuclear applications. Responsibilities include installation, calibration, and troubleshooting of electrical systems, along with routine maintenance...SuggestedHourly pay
$90k - $140k
...Field Service - HPLC LCMS MS Instrumentation - Passaic, NJ Metrology Metrologist Field Service Tech Technician Engineer Install Repair Calibrate Maintain Validate Maintenance... ...and other positions. We use an email quality control service to maintain security and a remove and...SuggestedContract workSecond jobRemote workRelocation packageDiedre Moire
Passaic, NJ2 days ago- ...E&I Maintenance Technician Seize a unique opportunity to join a team advancing cutting... ...repair of electrical, electronic, and instrumentation systems supporting aerospace manufacturing... ...skills for field devices and control loops. Ability to speak, read, and write...Permanent employmentContract workFor contractorsRelocation packageShift workWeekend work
GE Aerospace
Newark, NJ19 hours ago $79.64k - $99.7k
Position Summary The SCADA Instrumentation Technician III is an entry‑level position that will assist in maintaining a secure, standardized, and reliable Supervisory Control and Data Acquisition (SCADA) environment. The incumbent will be responsible for communication effectiveness...Flexible hours$79.64k - $99.7k
...and calibration of user charge flow metering collection system instrumentation and signal communications. Conducts asset inspections and... ...applications of flow metering principles and practices and computerized control systems. Must be familiar with pipe and manhole assessment...Work experience placementFlexible hours- PENTAX Medical is seeking a Quality Control Inspector to support incoming, in-process, and final product inspections at our Montvale, NJ site. You will assess SOPs, perform supplier and internal inspections, and contribute to CAPA and MRB activities. Ideal candidates have...
- Passaic Valley Sewerage Commission is seeking an SCADA Instrumentation Technician III to assist in maintaining a secure SCADA environment and support automation system integration. The role requires hands-on programming, commissioning, and field repairs across Rockwell...
$20 per hour
...customer service and techni... Show more Permanent Packaging Technician (2nd Shift- 3pm to 11:30pm)- Parsippany NJ. The Packaging... ...keep employees s... Show more Field Service - HPLC LCMS MS Instrumentation - Passaic, NJ Metrology Metrologist Field Service Tech Technician...Hourly payPermanent employmentFull timeContract workTemporary workPart timeWork at officeLocal areaImmediate startAfternoon shift$30 - $36 per hour
...Electronics Technician Crane Aerospace & Electronics supplies critical systems and... ...systems, such as computer equipment, instrumentation, digital / analog, electronic products... ...: This position may require access to Controlled Data or Information. Where the position...For contractorsFlexible hoursCrane Aerospace & Electronics
Caldwell, NJ19 hours ago$20 - $49 per hour
...Communications Electronics Installation Technician - ESA 100% Travel | United States | Full-Time Position Overview Crown is seeking... ...associated communication systems Setup and support Radio Control Equipment (RCE) Connect and integrate Telco requirements...Hourly payFull timeFor contractorsWork at officeLocal areaMonday to ThursdayCrown Consulting
Newark, NJ6 hours ago- ...Global Express A&P Avionics / Electrical Technicians for a Part 135 Operation. Candidate... ...outside services Work closely with MX Control and MX Supervisor to analyze and correct... ...of knowledge in aircraft avionics and instrument systems. This includes varying amounts...WorldwideRelocationFlexible hoursNight shift
Worldwide Jet
Teterboro, NJ3 days ago $57.72k - $59.72k
...NEW JERSEY 07102 ROGER LEN, SUPERINTENDENT ELECTRONIC SYSTEMS TECHNICIAN 2 | Office of Safety & Security (Pending availability of funds... ...microprocessors, computer board components, and all equipment controlled by such systems. Tests and troubleshoots problems with electrical...Permanent employmentContract workWork at officeLocal area- ...outgoing personality and the ability to work autonomously while ensuring product quality. Responsibilities include performing quality control testing, assembling and dismantling devices, and following quality requirements. Candidates must have a High School diploma or...
$40.21 per hour
...Electronics Technician Bus Maintenance Job Description: Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers...Hourly payRemote workNJ TRANSIT
Newark, NJ19 hours ago- ...are seeking a skilled and detail-oriented Line Winder Assembly Technician to join our team. This role involves performing a variety of... ...with manual and power tools, as well as measurement instruments. Good communication skills for customer support and training...Visa sponsorshipWork visa
Triangle Manufacturing CO
Saddle River, NJ4 days ago $35 - $43 per hour
...Biomedical Equipment Technician II Dialysis Innovative Renal Care is seeking a Biomedical Equipment Technician II to support two dialysis clinics in West Orange, NJ and East Orange, NJ, operating Fresenius 2008T machines. The Biomed II performs repairs, preventive...Hourly payFull timeRelocation- Cypress HCM is seeking a Biomedical Equipment Technician in Ramsey, New Jersey, to perform maintenance and repairs on laboratory equipment. The ideal candidate will have at least 2 years of experience in biomedical equipment maintenance and be proficient in using CMMS...
- ...Position Summary The Medical Field Service Technician provides front-line support to clients by performing installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role ensures high levels of customer...Temporary workWork at officeRemote workMonday to Friday
RAY
Fort Lee, NJ3 days ago - Acosta Sales & Marketing is seeking a part-time Retail Display Installer for Bergen Town Center, Paramus, NJ. You will enhance the retail experience by ensuring proper placement and assembly of electronic displays at major stores. In this role, you will represent global...Part timeFlexible hours
- A leading cancer reference laboratory is seeking a motivated Biomedical Site Specialist in Ramsey, NJ. This role involves hands-on support for biomedical equipment and CMMS coordination. Responsibilities include preventive maintenance, troubleshooting, and documenting equipment...
$57.72k - $59.72k
A public educational institution based in Newark is seeking an Electronic Systems Technician 2 for its Office of Safety & Security. The role involves installing, maintaining, and troubleshooting electrical and electronic systems. Applicants must have completed a vocational...Work at office- Job Title Location 111 Industrial Ave, Teterboro, NJ, 07608, United States Worldwide Jet Charter Inc.Worldwide
$26 - $29 per hour
...for testing and calibration of assembled instruments and performing trouble shooting tasks... ...Perform all requirements of an Electronic Technician Assist in the development of test... ...issuing and voiding documentation, material control procedures and control of defective...Hourly payTemporary workWorldwide$49 per hour
...We are seeking a skilled Lead Security Systems Technician to install, maintain, and repair electronic security systems, including CCTV, access control, intercom, gate systems, and alarm systems out of Elizabeth NJ. This is a hands-on role for someone with strong technical...Hourly pay$33.89 per hour
Belcan Corporation is looking for a Union - Electronic Test Technician (Level 1) in Clifton, New Jersey. The role demands testing and troubleshooting of digital, analog, and RF assemblies down to the component level. A valid U.S. Security Clearance is required. Candidates...Contract work$17 - $20 per hour
Title: Production Mechanic Line Setter (Entry Level) Reports to: Mechanic Manager Department: Operations - Production Management Responsibility Summary: We are looking for hands-on, mechanically inclined individuals to join our production team as Production...Hourly payFull timeFlexible hours$34.9 - $47.11 per hour
Job Title: BMET II Location: Cooperman Barnabas Medical Ctr Department Name: Clinical Engineering Req #: 0000247036 Status: Hourly Shift: Day Pay Range: $34.90 - $47.11 per hour Pay Transparency: The above reflects the anticipated hourly wage range...Hourly payFull timeTemporary workFlexible hoursShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Instrumentation & Controls Technician. Be the first to apply!
