Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

General Paint Prep Laborer

$21 - $22 per hour

Aerotek

Paint Line Prep Laborer

Prepare metal parts for painting by grinding, sanding, cleaning, and racking. This role supports the paint line and offers growth into an industrial painter position.

Grind and sand metal parts to create smooth, paint-ready surfaces

Deburr edges and remove imperfections

Wash and clean parts before painting

Rack parts onto the paint line in the correct order

Tape and mask areas that should not be painted

Inspect parts to ensure they meet quality standards

Keep your work area clean and organized

Work with the paint team to keep production moving

1+ year of manufacturing or production experience (paint line preferred)

Experience with grinders, sanding, or hand tools

Ability to lift 30–50 lbs (most parts lighter)

Comfortable standing for full shifts and doing repetitive work

Strong attention to detail

Willing to wear a respirator (must pass fit test and be clean shaven)

Comfortable working in a slightly dusty/dirty environment

Paint prep or industrial painting experience

Experience with masking, taping, or racking parts

Interest in growing into a painter role

1st Shift: Mon–Thurs, 6:00 AM – 4:30 PM

2nd Shift: Mon–Thurs, 4:00 PM – 2:30 AM

Occasional Friday overtime (4–6 hours)

Clean, organized production shop

Work in paint area with a laid-back but productive team

Uses solvent-based paint (low heavy dust, but still some sanding debris)

Strong benefits, PTO, and paid holidays

Profit sharing + company-paid life insurance

Health plans + free telehealth support

Opportunity to go permanent with a raise

Clear path to grow into an industrial painter

This is a Permanent position based out of BLAINE, MN.

The pay range for this position is $21.00 - $22.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in BLAINE,MN.

This position is anticipated to close on Jul 3, 2026.

Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the General Paint Prep Laborer in Blaine, MN vacancy
  • $20 - $22.75 per hour

     ...Paint Prep Laborer Support the paint process by prepping, loading, and unloading metal parts. This role includes training in powder coating...  ...line Rack parts securely for processing Assist with general production tasks Learn powder coating (spraying and... 
    Suggested
    Contract work
    Temporary work

    Aerotek

    Anoka, MN
    1 day ago
  • $20 - $22.75 per hour

     ...Job Title: Prep Laborer Job Description Join our dynamic team as a Prep Laborer where you...  ...prepping products, loading and unloading the paint line, and eventually learning the art of...  ...of experience in manufacturing or general labor. ~ Ability to lift 50 pounds.... 
    Suggested
    Weekly pay
    Permanent employment
    Temporary work
    Summer work
    Work at office
    Immediate start
    Anoka, MN
    a month ago
  • $20 - $22.75 per hour

     ...Job Title: Paint Prep Laborer Job Summary Support the paint process by prepping, loading, and unloading metal parts. This role includes...  ...line Rack parts securely for processing Assist with general production tasks Learn powder coating (spraying and finishing... 
    Suggested
    Weekly pay
    Contract work
    Temporary work
    Anoka, MN
    5 days ago
  • $26 - $35.05 per hour

     ...understand blueprints, specifications, and routings Physical Demand Factors The following physical demand factors should be used as a general guideline for employees listed under this job title. Specific requirements will vary based on the employee’s individual work... 
    Suggested
    Permanent employment
    Contract work
    Work visa
    Monday to Friday
    Afternoon shift

    Kurt Manufacturing

    Coon Rapids, MN
    2 days ago
  • $65k

    Manufacturing Quality Control Inspector This full time, permanent Manufacturing Quality Control Inspector career opportunity is a newly-created role at a growing, metal product manufacturing company that promotes from within. This employer promotes from within and seeks...
    Suggested
    Permanent employment
    Full time

    MRINetwork

    Circle Pines, MN
    3 days ago
  •  ...About the Role: The Paint Prepper plays a critical role in ensuring surfaces are properly prepared for painting, which directly...  ...instructions and safety guidelines. Physical ability to perform manual labor, including standing for extended periods, lifting, and working... 
    Monday to Friday

    Schwing America

    North Oaks, MN
    6 hours ago
  •  ...Written communication at shift change for status update.Train others to use inspection equipment that pertains to the job being run.General ResponsibilitiesFollow all work instructions.Responsibility to protect Donatelle confidential information and Intellectual Property... 
    Work at office
    Shift work

    Donatelle

    New Brighton, MN
    3 days ago
  •  ...preventative maintenance checks Handle materials, tooling, and parts throughout production processes Accurately record job data and labor in ERP system Maintain a clean, organized, and safe work environment (5S standards) Follow all safety guidelines, including PPE and... 

    Chandler Industries

    Blaine, MN
    5 days ago
  • $29 - $37.5 per hour

     ...Time Off Paid Holidays Employee Assistance Program Physical Demand Factors The following physical demand factors should be used as a general guideline for employees listed under this job title. Specific requirements will vary based on the employee’s individual work... 
    Permanent employment
    Contract work
    Work visa

    Kurt Manufacturing

    Fridley, MN
    5 days ago
  • $110k - $225k

    CA based Law FIrm seeks an Employment or Workers Comp Attorney! This Jobot Job is hosted by: Ron Calhoun Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $225,000 per year A bit about us: Our ...
    Local area
    Remote work
    Flexible hours

    Jobot

    Blaine, MN
    1 day ago
  • $19 - $25 per hour

    Job Title: Metal Finisher Job Description This role focuses on finishing stainless steel components by grinding welds to a smooth, consistent surface and polishing them to a mirror finish. You will work with stainless steel parts after fabrication, remove imperfections...
    Weekly pay
    Permanent employment
    Contract work
    Temporary work
    Shift work

    Aerotek

    Anoka, MN
    5 hours ago
  • Join Us To Empower The World To Work Out, Creating Healthier Lives Together Perform all functions of laser operation and set-up ensuring safety, quality, and productivity. Essential Job Functions: Set-up, operate and adjust machinery according to laser set up ...
    Full time
    Temporary work
    Local area
    Afternoon shift

    Life Fitness

    Anoka, MN
    3 days ago
  • $23.08 - $33.46 per hour

    Turret Laser Operator The Turret Laser Operator is responsible for setting up, adjusting, and operating numerically controlled machine tools to perform turret punching operations and laser cutting operations. This role requires a high level of skill, broad knowledge...
    Hourly pay
    Temporary work
    Local area
    Shift work
    Afternoon shift

    RMS | Cretext Medical

    Anoka, MN
    6 days ago
  •  ...parts Following safety procedures Correct documentation (timekeeping, BOM's, prints, etc.) Other duties as assigned such as general maintenance, housekeeping, etc. Qualifications Machining experience in a related industry preferred Machine tool... 
    Hourly pay
    Full time
    Monday to Thursday
    Shift work
    Afternoon shift

    Aggressive Hydraulics

    Cedar, MN
    2 days ago
  • $23.08 - $33.46 per hour

    Brake Press Operator Brake Press Operator will be responsible for plans, lays out, and performing all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances. Shift: 2nd Shift Monday through Thursday...
    Hourly pay
    Temporary work
    Work at office
    Local area
    Monday to Thursday
    Shift work
    Afternoon shift

    RMS | Cretext Medical

    Anoka, MN
    5 days ago
  • $24 - $27 per hour

    Press Brake Operator Design Ready Fabrications is seeking a skilled and motivated Press Brake Operator to join our growing team. The ideal candidate will have a strong background in operating and maintaining press brake machinery, with a proven track record of safety...
    Hourly pay
    Immediate start
    Shift work
    Afternoon shift

    Design Ready Controls

    Champlin, MN
    3 days ago
  • Mate Precision Tooling Inc. is seeking a Machinist Intern to perform general maintenance and learn to operate manual and CNC machines. Current enrollment in a CNC Technology program is required. Key responsibilities include setting up machines, inspecting work for quality... 
    Full time
    Part time
    Summer work
    Internship
    Flexible hours

    Mate Precision Tooling Inc.

    Anoka, MN
    6 days ago
  • $37.44k - $52k

    Job Description Job Description Are you looking to grow your manufacturing career with a stable, sound, and family-oriented company? J&J Machine Inc. is seeking a dependable CNC Setup Machinist to join our growing team.In this role, you won't just run parts—you...
    Full time
    Temporary work
    All shifts
    Shift work
    Night shift
    Weekend work
    Day shift
    Afternoon shift

    J&J Machine Inc.

    Blaine, MN
    a month ago
  • $23.08 - $33.46 per hour

    rms Company in Anoka, Minnesota is seeking a Brake Press Operator for 2nd shift, responsible for operating sheet metal machines and ensuring adherence to safety and quality standards. The role requires a High School Diploma/GED and 2 years of brake press setup experience...
    Afternoon shift

    rms Company

    Anoka, MN
    5 days ago
  • $23.08 - $33.46 per hour

    A recognized manufacturing company in Anoka is seeking a Brake Press Operator to oversee sheet metal operations and perform setups on various machines. Candidates should have a high school diploma, 2 years of brake press experience, and proficiency in Microsoft Office. ...
    Hourly pay
    Work at office
    Afternoon shift

    Cretex Companies, Inc.

    Anoka, MN
    2 days ago
  • rms Company in Anoka, Minnesota is seeking a Brake Press Operator for weekend shifts from Friday to Sunday. The role entails operating a variety of sheet metal machines and requires at least 2 years of experience in brake press setup. Applicants must possess a high school...
    Work at office
    Shift work
    Weekend work

    rms Company

    Anoka, MN
    5 days ago
  • $24 - $27 per hour

    Design-Ready-Controls is seeking a skilled Press Brake Operator in Champlin, Minnesota, to operate and maintain press brake machinery, particularly Amada Press Brakes. The ideal candidate will ensure the quality of produced components through precise machine operation and...
    Hourly pay
    Afternoon shift

    Design-Ready-Controls

    Champlin, MN
    2 days ago
  • MAS creates custom-engineered thermal management solutions for markets that thrive on flexibility, creativity, and bold ideas. From humble beginnings to becoming an emergent multi‑brand manufacturing leader, we’ve grown by bringing in great people and empowering them to...
    Summer work
    Shift work
    Weekend work
    Day shift

    Mas Hvac Inc

    Dayton, MN
    4 days ago
  • A leading manufacturer of medical components is seeking a Brake Press Operator in Anoka, Minnesota. The role involves planning and performing sheet metal operations using various machines, with responsibilities including setup and operating equipment while adhering to safety...

    Cretex Medical

    Anoka, MN
    5 days ago
  • A leading medical manufacturing company in Minnesota is seeking a Brake Press Operator responsible for planning and executing sheet metal operations with precision. The ideal candidate will have two years of related experience and will be proficient in Microsoft Office....
    Work at office
    Shift work
    Weekend work

    Cretex Medical

    Anoka, MN
    2 days ago
  • Mas Hvac Inc in Dayton, MN is seeking a Brake Press Operator responsible for setting up, operating, and maintaining press brake machines. The candidate should have 3+ years of experience and a high school diploma. Responsibilities include reading blueprints, performing ...

    Mas Hvac Inc

    Dayton, MN
    4 days ago
  • $24 - $29 per hour

    Job Description Job Description Top Job Located in Brooklyn Park, MN Salary: $24-$29/hr Job post summary Pay: $23.00 - $29.00 per hour NEW Opportunity! We are seeking a skilled Press Brake Operator with hands-on experience operating Amada or Cincinnati...
    Hourly pay
    Work at office

    Express Employment

    Brooklyn Park, MN
    4 days ago
  • $24 - $30 per hour

    Job Description Job Description St Paul, MN, USA $24.00-$30.00/Hourly Shifts: 1st In this role, you will be responsible for settnig up and operating press brake machinery to bend and form metal components according to specifications. Read and interpret...
    Hourly pay
    Shift work

    Onin Staffing

    Little Canada, MN
    2 days ago
  • Job Description Job Description Position Summary Brake Press Operator will be responsible for plans, lays out, and performing all types of sheet metal operations to fabricate wide variety of units or products of complex design involving close tolerances.   Shift...
    Contract work
    Work at office
    Monday to Thursday
    Shift work
    Afternoon shift

    rms Company

    Anoka, MN
    19 days ago
  • nVent is seeking a skilled individual to join our team as a CNC Operator in Anoka, Minnesota. The role involves setting up, adjusting, and operating CNC manufacturing equipment to meet production needs and maintain quality standards. The ideal candidate will have a high...

    nVent

    Anoka, MN
    2 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to General Paint Prep Laborer. Be the first to apply!