MATERIALS HANDLER (FORKLIFT/MOTOR VEHICLE OPERATOR)

Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to perform the full range of warehousing duties with responsibility of handling or overseeing one or more product lines, a segment of a large warehouse, or serve as the senior employee in a smaller warehouse. The position requires the use of forklift trucks and light motor vehicles. Responsibilities - Responsible for organizing and coordinating an effective receiving operation. Responsible for organizing and coordinating an effective storage operation. Performs tasks involved in issuing and shipping items. - Operates forklift trucks and automated material handling and identification equipment to include mobile stock selectors and electromechanical automated equipment, such as high-rise automated storage and retrieval vehicles to move, stack and unstack, load and unload, bin, and position material. - Drives one or more types of trucks, such as pickup, panel, and flatbed trucks, which typically have a gross vehicle weight of 10,000 pounds or less, on public roads at highway speeds. - Maintains records and documents actions. - Performs material handling duties, including the use of tools and other equipment, in a safe manner, utilizing safety practices and procedures, and complying with established safety rules and regulations Requirements Conditions of Employment Qualifications Condition of Employment Continue The duties of this position meet all requirements as a category 4 designation and shall not be vacated during a national emergency or mobilization without seriously impairing the capability of the parent Federal Agency or office to function effectively. This position must be removed from the Ready Reserve and cannot become a member of the Ready Reserve. (IAW: DoDD 1200.7, "Screening the Ready Reserve,") In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6900 Warehousing and Stock Handling Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a WG-6907 MATERIALS HANDLER (FORKLIFT/MOTOR VEHICLE OPERATOR) without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of accepted warehousing methods, procedures, and material handling techniques; warehousing functions, such as material receiving, storage, issuing, and preservation; and of warehouse configurations, storage requirements for particular commodities, and storage documentation requirements. 2. Knowledge of inventory procedures; regulations, procedures, and policies related to records maintenance and documentation; and of safety regulations, practices, and procedures. 3. Skill in the use of automated material processing equipment and systems to include computer terminals, optical readers, and scanners. 4. Ability to interpret and apply instructions pertaining to material handling; and to maintain tools, equipment, and work area in a neat, clean, and orderly manner. 5. Ability to prepare inventory and production reports; and to screen shipping and receiving documents for discrepancies. 6. Ability to safely operate fork lift trucks to handle controls for starting, stopping, backing, lifting, lowering, tilting, and driving fork lift trucks through narrow aisles, up and down ramps, and in and out of trucks; and to safely drive and operate a motor vehicle to manipulate controls for starting, stopping, backing, and driving vehicles in all types of traffic and road conditions and in judging overhead, side clearance, turning radius, and braking distance. Physical Effort Works on hard surfaces and in work areas that require standing, stooping, bending, and working in tiring and uncomfortable positions. May lift and carry weights up to 40 pounds. May handle heavier items with weightlifting equipment or with assistance from other workers. Work requires light to moderate physical effort in reaching, bending, turning, or moving hands, arms, feet, and legs to operate hand and foot controls while driving, raising, lowering, and tilting forklift trucks. Subject to possible strain caused by vibration of forklift trucks. Occasionally may be required to make limited emergency repairs on vehicles, such as changing a flat tire. Working Conditions Work is done inside and outside in areas that may be hot, damp, cold, drafty, or poorly lighted. Employee is regularly exposed to the possibility of cuts, scrapes, bruises, falls from ladders, falling material, or injury from equipment. May be exposed to dust, dirt, grease, solvents, and high noise areas while working in a mechanized work area, or radiation, toxins, explosives hazards, or chemical fumes while working in a hazardous materials area. May be required to wear protective clothing such as hard hats, steel toed shoes, rubber gloves, masks, and rubber aprons. Drives motor vehicles in all types of traffic and weather conditions. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. Education Additional Information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here. If you have questions regarding this announcement and have hearing or speech difficulties click here.