Multi Craft Maintenance Technician - 7a-7p
Genpak
Maintenance Technician
Maintain all equipment/machinery and building in good working order and repair as necessary.
Essential Duties And Responsibilities:
Must be able to work the "Shift Work schedule" which includes every other Sunday.
Provide and maintain appropriate tools and toolbox to perform all necessary job functions.
Coordinate all job assignments with Shift Supervisor at start of shift to ensure maximum production uptime and efficiency.
Assist Shift Supervisor with proper facility evaluation procedures including machinery shutdown.
Oversee and coordinate PM Operator functions for the respective shift.
Excellent understanding of pneumatics, electrical controls and hydraulics with ability to diagnose and correct problems.
Application of strong mechanical and electrical knowledge including such as abilities in reading of schematics, etc.
Perform assigned Preventive Maintenance/ Safety Programs per defined schedule with accurate and complete documentation.
Complete all assigned Work Orders in a timely manner.
Maintain Maintenance Parts Inventory per Infor and Plant Sanitation standards including:
- Ensuring tag is pulled and turned in when part is pulled out of inventory
- Recording correct parts used on all work orders
- Parts are re-stocked in appropriate location per Infor System
Able to breakdown and setup all Extrusion and Thermoforming product on machinery to standards set including:
- Knowledge of quality/operational standards per product
- Quality inspections performed
- Work area cleaned
- Ensuring that tooling is in good working condition prior to setup
- Cleaning, maintenance and proper storage of tooling upon breakdown
Full understanding of extrusion and thermoforming process and machinery to ensure quality production uptime including:
- Diagnosing of problem (microphraser control panel, dies, ovens, trim press, etc.)
- Repair of problem with little to no supervision to ensure maximum production run time.
- Adjustment to daily schedule (break times, meal periods, etc.) to ensure machinery in back in full production to maximize production uptime.
Perform all facility shutdown and startup procedures correctly and completely including incinerator, etc.
Perform necessary repairs to building including but not limited to:
- Plumbing
- Roof
- Silos
- Trenches
- Heating and air systems
- Dock doors and plates
- Chiller system
- Parking lot
- Building additions/renovations
- Equipment modifications
- New equipment installations
Follow Hot Work Permit procedures and ensure proper documentation is completed and signed off by Maintenance Manager/Shift Supervisor.
Operate all PIT equipment per OSHA specifications, including daily inspections, changing of batteries/propane tank, etc.
Perform all housekeeping functions necessary to business operations (from daily shift requirements to Plant Sanitation audits) in respective work areas at all times.
Perform all "end of shift" job functions including:
- Communicate all equipment and material issues arising from the operation of the shift with on-coming Maintenance personnel and/or Shift Supervisors/Maintenance Manager at each shift change.
- Clean and organize work area
- All maintenance parts and tools are properly stored
- Breakroom is neat and clean
Unload "incoming" product/material for receipt and placement into facility as business demands.
Assist in building/machinery preparation of all Plant Sanitation/OSHA audits.
Work overtime as business demands, including monthly training classes as mandated by OSHA and Plant Sanitations Certifications.
Comply with all company policies and procedures, including all safety regulations.
Perform any and all job assignments/functions (including special projects) as necessary to daily business demands as instructed by Management.
The company has the right to alter or add job functions to meet business demands as necessary.
Education And/Or Experience:
High school diploma or general education degree (GED)
3 years experience of manufacturing maintenance experience to include: welding, trouble-shooting of pneumatics, hydraulics, electrical controls, and maintenance/repair of plant machinery
Language Skills:
Ability to understand, read, write and speak English as all Maintenance personnel will be required to read and interpret Company documents such as safety rules, operating and maintenance instructions, and procedure manuals; required to complete and document all required reports accurately and without assistance; and communicate with Supervisors and co-workers regarding daily operations of equipment and material being produced.
Mathematical Skills:
- Ability to operate a calculator.
- Ability to read and understand instrumentation gauges and schematics
- Ability to understand and determine "differentiation pressures" from a pressure controller
- Able to apply mathematical concepts such as fractions, percentages, ratios and proportions.
Reasoning Ability:
- Ability to recognize and identify problems with machines and/or material via collection of data and interpretation of that data.
- Ability to apply common sense "understanding" to carry out written or oral instructions.
- Ability to apply troubleshooting techniques to issues as they arise and seek help when necessary.
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
- Ability to differentiate between "good" and "bad" quality.
Certificates, Licenses, Registrations:
- Powered Industrial Truck Certification (forklift, clamp, sissor lift, etc.)
- Lockout/Tagout Certification
- On-site Hazmat Certification
- Hot Work Permit Certification
Frequency Table
C - Continuous (More than 96 times per shift)
F - Frequent (33 to 96 times per shift)
I - Intermittent (5 to 32 times per shift)
O - Occasional (4 or less times per shift)
Physical Demands -- 12 hr. Shift
The employee must be able to perform all of the following tasks with or without reasonable accommodation.
Task - Amount of Time - Frequency
None - Under 1/3 - 1/3 to 2/3 - Over 2/3 - (C, F, I, O)
Stand - X - C
Walk - X - C
Sit (PIT and Breakroom) - X - I
Use hands to handle and feel - X - C
Climb or balance - X - I
Stoop or squat - X - I
Talk or hear - X - I
Reaching - X - I
Smell - X - O
Hand/eye coordination - X - C
Does this job require that weight be lifted or force be exerted? If so, check the appropriate boxes below. -- 12 hr. Shift
Weight - Amount of Time - Frequency
None - Under 1/3 - 1/3 to 2/3 - Over 2/3 - (C, F, I, O)
Up to 10 pounds - X - C
Up to 25 pounds - X - C
Up to 50 pounds - X - I
Up to 100 pounds - X - O
More than 100 pounds - X - O
Hand Manipulation Is Required
Task - Right Hand - Left Hand - Frequency
No - Yes - No - Yes - (C, F, I, O)
Simple Grasping - X - X - C
Power Grasping - X - X - C
Pushing/Pulling - X - X - C
Genpak- ...An international manufacturer of automotive parts is looking for a Stamping Press Maintenance Technician near Seymour, IN. The ideal candidate will have prior experience maintaining industrial press equipment in a high demand environment and be able to ensure that facility...Suggested
- ...Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment...SuggestedWork experience placementWork at officeImmediate startMonday to FridayNight shiftWeekend work
$27 - $32 per hour
...Job Description About the Role Pinnacle Partners is recruiting for a Repair Maintenance Technician in Scottsburg, IN. This position focuses on troubleshooting, repairing, maintaining, and improving highly specialized manufacturing equipment and custom-built production...SuggestedHourly payWork at officeShift work$25 - $32 per hour
...Maintenance TechnicianScottsburg, IN | Direct Hire | $25–$32/hr, DOE + 1.25 Shift DifferentialShift: 3rd Shift, Sunday– Thursday, 9:... ...30 PM) About the Role BESTAFF is hiring a Maintenance Technician for a growing manufacturing partner in Scottsburg, IN. You' ll...SuggestedWeekly payPermanent employmentShift workNight shiftDay shift- ...Repair Maintenance Technician Position at Samtec, Inc Job title: Repair Maintenance Technician Code: 33-xx-00-1 11-xxx Summary/Objective: Responsible for setup, maintaining, testing, adjusting, and supporting manufacturing machinery and machinery processes...SuggestedNight shift
- ...Automotive Service Technician At John Jones Auto Group, were more than just a place to... ...Career advancement opportunities within a multi-location auto group Responsibilities... ...issues Complete repairs and maintenance including brakes, suspension, engine, transmission...
- ...activities ashore. Key Responsibilities Serve as an Electronics Technician (ET) or Fire Controlman (FC) after training, based on... ...control, technical documentation, and test routines; team based maintenance and watchstanding afloat and ashore, often on rotating shifts...ApprenticeshipLocal areaRotating shift
- ...Job Description Job Description 3rd Shift Repair Maintenance Technician Build your maintenance career working hands-on with advanced automation and high-precision manufacturing equipment and systems. Company Profile A global leader in advanced...Full timeShift workNight shift
- ...Ascendance is looking for an experienced, full-time Service Technician. This role is responsible for providing service to our customers... ...exceptional customer service. Duties can include cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation...Full timeRelocation package
- ...you to be part of our journey. Job Description This role will mainly be focused on fluid checks and basic maintenance. Typically, a Lube Service Technician will change a vehicle's oil, check the transmission fluid and other fluid levels, inspect various belts and...
$28 - $40 per hour
...Maintenance TechnicianDue to continued business growth and AI/DX transformation, Aisin Drivetrain, Inc. is seeking motivated, qualified... ...desired / preferred.Motivated desire to be a top-level technician required.Plus, many more benefits. Contact us to learn more details...Shift workWeekend workAfternoon shift$35 per hour
...Job Description Job Description On-Call IT Field Technician – PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible – You accept jobs based...Hourly payFor contractorsLocal areaRemote workFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Multi Craft Maintenance Technician - 7a-7p. Be the first to apply!
- hospital maintenance mechanic Scottsburg, IN
- hospital maintenance technician Scottsburg, IN
- maintenance technician Scottsburg, IN
- maintenance mechanic Scottsburg, IN
- data center maintenance technician Scottsburg, IN
- hotel maintenance technician Scottsburg, IN
- repair technician Scottsburg, IN
- pool repair technician Scottsburg, IN
- maintainer Scottsburg, IN
- maintenance representative Scottsburg, IN



