Equipment Operator
GFL Environmental USA Inc.
Safely operate and/or have the ability to operate various equipment including forklift, bobcat, backhoe, track hoe, compactor and/or steer equipment to bale, load and move waste material.
Key Responsibilities: • Operate necessary equipment to bale and load waste material into trailers. • Perform inspection and maintenance checks of equipment daily. • Grease/lubricate equipment, check and add fluids to equipment daily • Operator will steer, guide and or drive the above listed equipment at the assigned site, if the equipment is used at the particular site(s) using steering wheel, shifters, levers, buttons and pedals. • Operator will substitute for another operator if someone is absent from the work crew or as needed/required. • Operator will clean trash from tracks of heavy equipment by pulling and or cutting material away from tracks and gear mechanisms at least once daily or more if needed. • Operator will use a two-way radio to communicate with co-workers in the field and or office regarding work activities, Requirements: and priorities for the work day. • Conform in all respects with applicable federal, state/provincial and local laws, regulations, ordinances and other orders and to all company policies, procedures and directives from supervisors. • Maintain appearance of the grounds and facility. • Attend safety and branch meetings. • Perform other duties and responsibilities as required or requested by management. Requirements: • High school diploma or general education degree (GED) desired, but not required. • Completion of forklift certification. • Ability to obtain Transfer Station / Landfill Operations Certification if needed. • Operate excavator, forklift/bobcat, front-loader, baler, backhoe, track hoe, bull dozer, compactor and/or steer equipment, safety shoes and eye protection. Knowledge, Skills and Abilities: • Demonstrate ability to follow instructions and work under little supervision. • Apply commonsense understanding to deal with problems involving several concrete variables in a standardized setting • Ability to perform the four basic functions of math and to be able to read and understand the meaning of equipment gauges. • Must have the ability to read, speak, understand and write the English language. • Must be able to frequently lift/push/pull up to 25 pounds and occasionally lift/push/pull up to 50 pounds. • Work in outdoor environment 100% of the time. Physical/Mental Demands: • Ability to stand, sit, walk, use hands and fingers, reach, stoop, kneel, crouch, crawl, talk, hear, climb, balance, taste, and smell. • Visual Requirements: include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. • Must be able to frequently lift/push/pull up to 25 pounds and occasionally lift/push/pull up to 50 pounds. Working Conditions: • Constantly exposed to loud noise, humidity, outside weather conditions, moving mechanical parts, vibration, toxic and caustic chemicals, fumes and airborne particles • Work environment is usually moderate to loud. • Work in outdoor environment inside heavy equipment covered cab, but exposed to all weather conditions, except lightning storms. • Occasionally work in high precarious places. • Work in outdoor environment 100% of the time.We thank you for your interest. Only those selected for an interview will be contacted.
GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact
Please note that GFL does not provide visa sponsorship for this position. Valid work authorization in the country where the job is located is required. Successful candidates will be required to provide valid documentation confirming their eligibility to work in the country where the job is located prior to their start date.
This hiring process may utilize machine-based systems to assist in screening and assessing applicants. Final selection decisions are made by our recruitment team.
- ...Louisiana, DDI offers clearing, access, site preparation, logistics, and storm response services throughout North America. Heavy Equipment Operator: The Heavy Equipment Operator is responsible for land clearing of Right of Ways. Must be familiar with operating and...SuggestedFull time
- ...OVERVIEW Experience operational excellence. Real investment in personal and professional development. And an ability to make real and... ...moving product within the distribution center using powered equipment such as standup forklifts, order selectors, reach trucks, powered...SuggestedLocal areaFlexible hoursWeekend work
- ...clean and accessible demeanorWilling to be trainedQualificationsHigh school diploma or GED preferredAt least 1 year of experience operating heavy equipmentTeam playerValid driver's licenseDrug-freeDependable transportationBenefits90-day performance reviewCompletion of 9...SuggestedWeekend work
$19.5 per hour
...Equipment Operator (Cherry Reach / Lift Reach Forklift) Pay: $19.50 per hour Schedule: 12-hour shifts (6:00 AM - 6:00 PM) on Friday, Saturday, and Sunday Position Overview We are seeking a reliable and safety-focused Equipment Operator to...SuggestedHourly payShift workWeekend work- ...Job Title Job Description Operate Dozer, Track Hoe, Skid Steer, Loader, Grader, Roller or other machinery Experience with GPS... ...GED preferred At least 1 year of experience operating heavy equipment Team player Valid driver's license Drug-free Dependable...SuggestedWeekly payWeekend work
- ...Heavy Equipment OperatorThe Heavy Equipment Operator is an entry level position in the construction, maintenance and repair of electrical transmission systems. This position works at various locations. The position may also be required to travel to another state depending...ApprenticeshipLong distance
- ...in this position. Management may assign additional tasks related to the type of work of the position as necessary.Operates heavy and specialized equipment for the installation, maintenance, and repair of collection system components.Operates trucks, trailers, track hoes...
- ...Job Description Position Summary: The Heavy Equipment Operator is an entry level position in the construction, maintenance and repair of electrical tranmission systems. This position works at various locations. The position may also be required to travel to another...ApprenticeshipLong distance
- ...consisting of short and long-haul transportation opportunities. Operators and/or drivers should have experience with Tanker Trailers,... ...School Diploma or Equivalent Follow instructions for operating equipment and keeping records Must be able to pass a background check...Hourly payWeekly payTemporary workFor contractorsFor subcontractorShift work
- ...(excluding power tools) May be expected to travel where the project requires (multi-state opportunities) Primary Function Operates heavy equipment including, but not limited to, dump truck, loader, trackhoe, backhoe, tamper, water truck and bulldozer. Typical Duties Operate...Temporary workFlexible hours
$21.37 per hour
...HEAVY EQUIPMENT OPERATOR I High school diploma or GED required; experience in equipment operation, road construction and maintenance or related public works infrastructure experience or any equivalent combination of education, training and experience which provides...Hourly pay- ...secure load on trailer during transit. - Load, unload or assist in loading and unloading of truck. - Must have the ability to operate the vehicle safely in traffic situations and follow policies and procedures of Palmetto Corp. - Must be able to lift 20lbs or more...Shorter hours16 hoursLive outShift workNight shiftWeekend work
- ...GARNEY A Loader Operator position is available at Garney. To be considered for this position you must have previous construction... ...Three years of experience operating Firm knowledge of equipment operations and maintenance Must be willing to work overtime...
- ...Salvage Vehicle OperatorOperate equipment in a safe and responsible manner to move salvage vehicles through all phases of the operation, maintain facility grounds. Help ensure compliance with all federal, state and local regulations. Support dismantle and yard operations...Local area
- ...teamworkAttention to detailPrior experience is preferred, but not necessaryExpected to be able to lift 50lbs at times. Ability to operate equipment such as skid steers and excavators is a plus!Responsibilities:Install landscape construction projects in collaboration with...Full time
- ...completion of assigned projects Respect company trucks and equipment Requirements: Valid driver's license Good driving... ...Expected to be able to lift 50lbs at times. . Ability to operate equipment such as skid steers and excavators is a plus! Responsibilities...Full timeShift work
$21 per hour
...Heavy Equipment Loader OperatorRogers Group, Inc., headquartered in Nashville, is a privately held aggregates and asphalt highway construction company operating in 13 states with over 3,800 employees. RGI, established in 1908, has the distinction of being recognized as...Full timeTemporary workShift workNight shift- ...GARNEY An Excavator Operator jobis available at Garney. To be considered for this position you must have previous construction experience... ...For Five years of construction experience Firm knowledge of equipment operations and maintenance Must be able to work overtime Must...
- ...GARNEY An Excavator Operator jobis available at Garney. To be considered for this position you must have previous construction... ...Five years of construction experience Firm knowledge of equipment operations and maintenance Must be able to work overtime...
- ...Carolinaconduit is seeking an experienced Excavator Operator in Greenville, SC to support underground utility installation projects.... ...candidate works safely in confined spaces like manholes, maintains equipment, and supports general site tasks while complying with OSHA...
$15.63 - $41.54 per hour
...Hepaco, a Clean Harbors company i in Greenville, SC is seeking a Class A CDL Driver to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This...Hourly payDaily paidFull timeLocal area$20 per hour
...Job Description Job Description Openwork is currently engaged in a search to find an Equipment Operator in Greer. In this Equipment Operator job you will be responsible for operating an order picker, turret truck, and forklift. Apply today if you meet the qualifications...Contract workMonday to FridayDay shift- ...Class A CDL DriverHepaco, a Clean Harbors company in Greenville, SC is seeking a Class A CDL Driver to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll...Daily paidFull timeLocal area
- ...Production Operator IEntry Level Production Operators serve in a learning capacity of processing raw machined components into finished... ...conduct scheduled Preventative Maintenance on all Production equipment, as well as safe operation of all material handling equipment,...
- ...OperatorWe are seeking a dependable, detail-oriented Production Operator to join our manufacturing team. In this role, you will be... ...a Production Operator:Set up, adjust, and operate production equipment (including coaters, winding, finishing, and related machinery)...Weekly payPermanent employmentFull timeContract workDay shiftAfternoon shift
- Onin Staffing - - Responsibilities: Set up, calibrate, and operate CNC machines; Modify and optimize CNC programs; Adjust feeds, speeds, and toolpaths; Inspect parts and verify tight tolerances; Troubleshoot machining issues and maintain equipment
- ...JOB SUMMARY: Set up and operate CNC Machines and edit CNC programs. Applies general knowledge of machining techniques and methods... ...all safety procedures, including wearing of required protective equipment. JOB SKILLS AND REQUIREMENTS : In depth knowledge of set...Temporary workWork experience placementLocal areaWorldwideFlexible hours
$25 per hour
...skilled machinist who enjoys working with complex machining processes, precision equipment, and challenging production projects. The ideal candidate has hands-on experience setting up, operating, and editing CNC programs and takes pride in producing high-quality parts....ApprenticeshipDay shiftEarly shift- Kelly Services, Inc. - - Responsibilities: Set up, operate, and adjust CNC machines; Edit CNC programs to meet part specifications; Read... ..., charts, and specifications; Inspect parts using precision measuring instruments; Maintain process records and clean equipment
$25 - $32 per hour
...What You'll Do as a CNC Machinist: Set up, calibrate, and operate CNC machines according to engineering prints, work instructions... ...technical specifications. ~ Proficiency using precision measuring equipment, including micrometers, calipers, and dial indicators....Weekly payPermanent employmentFull timeContract workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Equipment Operator. Be the first to apply!
- equipment transport Travelers Rest, SC
- equipment share Travelers Rest, SC
- quality equipment Travelers Rest, SC
- logging equipment Travelers Rest, SC
- dental equipment Travelers Rest, SC
- medical equipment Travelers Rest, SC
- equipment Travelers Rest, SC
- equipment driver Travelers Rest, SC
- construction equipment sales Travelers Rest, SC
- medical equipment planner Travelers Rest, SC


