ENGINEER
$127.65k - $195.19kNaval Sea Systems Command
Duties
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Additional information Salary per Location:
Norfolk, VA: $127,646 to $195,190
Philadelphia, PA: $138,595 to $197,200
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
- You will serve as the SUBSAFE Program Director, conceiving, formulating, directing, evaluating, and executing the overall NSWCPD SUBSAFE Program as the primary interface with NAVSEA, Naval Shipyards, and the Fleet.
- You will provide authoritative advice on SUBSAFE compliance and ensure all SUBSAFE capabilities are maintained by directing internal and external audits and managing multi-disciplinary engineering projects.
- You will ensure all quality assurance requirements for submarine programs are met, integrating efforts with program management, engineering, procurement, manufacturing, and other functional disciplines.
- You will conduct and oversee internal and external SUBSAFE Functional Audits (SSFA) and SUBSAFE Certification Audits (SSCA), including investigations of unprecedented quality assurance problems.
- You will oversee contractors by assessing quality control plans and evaluating repair and installation methods for submarine systems in manufacturing and industrial settings.
- You will brief senior leadership and represent the organization at top-level meetings, defending technical recommendations and negotiating on complex issues with experts and officials.
- You will lead diverse multi-disciplinary teams to resolve complex problems in critical submarine safety systems, motivating organizations to correct deficiencies.
- You will formulate overall mission and program objectives for the NSWCPD SUBSAFE Program and maintain expert knowledge of the SUBSAFE infrastructure across Naval Activities.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- All requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Functional Area and Tier assigned to the position, along with Continuous Learning (CL) points, are required within established timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Demonstrating expert knowledge and application of submarine safety (SUBSAFE) instructions, procedures, processes, production, and quality programs in accordance with the NAVSEA Submarine Safety (SUBSAFE) Requirements Manual, including serving as a recognized authority for engineering compliance.
- Demonstrating experience conducting, directing, and/or overseeing both internal and external SUBSAFE Functional Audits (SSFA) and SUBSAFE Certification Audits (SSCA), including onsite surveillance and investigations of quality assurance problems.
- Demonstrating proficiency in program management, including formulating overall mission and program objectives, providing authoritative advice to senior leadership, and briefing at the highest levels.
- Oversight of contractors, including assessing and evaluating contractor quality control plans for the acquisition, installation, and repair of electro-mechanical ship systems.
- Working with and lead diverse multi-disciplinary teams to resolve complex technical and quality assurance problems related to critical submarine safety systems, and to motivate individuals and organizations to recognize and correct deficiencies.
Additional qualification information can be found from the following Office of Personnel Management website:
AND
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Additional information Salary per Location:
Norfolk, VA: $127,646 to $195,190
Philadelphia, PA: $138,595 to $197,200
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at:
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link:
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the ENGINEER in Bryn Mawr, PA vacancy
$113.1k - $185k
...t settle until we give our best and know that we’re making a difference. We're looking for a few Building Automation and Controls Engineer in Conshohocken, PA/Cincinnati, OH/Indianapolis, IN and Cary, North Carolina locations who is excited about working on projects that...SuggestedFull timeRemote work- ...Controls / Automation Engineer You'll architect and implement real-time Controls and SCADA applications that directly power production across Life Sciences, Food & Beverage, and Specialty Chemical facilities. This is not maintenance-mode work. You'll be designing...SuggestedWork at officeShift work2 days per week
$91.4k - $122.5k
...collaborate closely with early-career professionals, clients, and sub-consultants. You’ll contribute to the successful delivery of engineering projects by helping manage schedules and ensuring technical quality in alignment with client expectations, scope, budget, and...SuggestedFull timeRemote work- Job DescriptionJob Title: Controls Engineer Location: Traveling 70% annually to multiple FXI locations Job Type: Remote Reporting to: VP of Engineering Director Reports: N/ABuilding our Future Together. FXI is a leading producer of foam innovation in the Bedding, Furniture...SuggestedFull timeTemporary workFor contractorsCurrently hiringLocal areaRemote workWork from homeHome officeVisa sponsorshipFlexible hours
- ...regulatory criteria, and contractual obligations. This position is principally a field role. RESPONSIBILITIES/DUTIES Construction QC Engineer II typical responsibilities and duties include, but are not limited to the following: Report to the field to perform, inspect,...SuggestedContract workFor contractorsFor subcontractorWork at officeLocal areaFlexible hours
$75k - $90k
...Compensation Range: $75,000 - $90,000 Electrical & Controls Engineer Remote - VA, TX, TN, WV, SD, MD, PA, OH, AZ, or UT Up to 50% U.S. Travel | International Travel May Be Required in the Future Design the Controls Behind Mission-Critical Cooling Munters...Remote workFlexible hours- ...Building EngineerThe Building Engineer is responsible for providing facilities and property maintenance to properties. This position involves the coordination, management and physical activity associated with the operation and maintenance of various building systems and...Immediate start
- ...Civil Engineers – Land Development / Site Design Well-established engineering firm is seeking Civil Engineers at all levels to join its growing team. Opportunities are available from entry-level through Project Manager, with a strong focus on land development and site...
$21 - $28 per hour
...demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a...Hourly payWork experience placementInternshipWork at officeLocal areaWorldwideRelocationRelocation packageFlexible hours3 days per week$160.12k
...difference and change the world. Job Description With general direction, creates and signs off on basic to highly complex engineering designs involving site layout development, site grading and drainage, hydraulics and hydrology calculations, water distribution systems...Work experience placementH1bLocal area- ...About the Role: As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling. This job is part...Work at officeLocal areaShift work
- ...it's about well-designed strategies tailored for every market and every location. We're looking for a high-energy, Senior HVAC Engineer to focus on our Data Center market. Join us, and you'll impact our success by delivering innovative HVAC design solutions for our...Remote work
- ...Overview As a trading system engineer, you'll work in a computationally intensive role that will allow you to use your strong technical skills to solve problems at the intersection of trading and technology. You will have the chance to work on challenging engineering...Full timeCasual work
- ...Job Description We have an immediate need for an Electrical Engineering Manager. As a passionate leader, you'll leverage your people management skills to help your team members discover what drives them, nurturing their purpose and guiding them forward. Your role...Local areaImmediate start
$120.4k - $158.03k
...facilities; it’s about well-designed strategies tailored for every market and every location.We're looking for a high-energy, Senior HVAC Engineer to focus on our Data Center market. Join us, and you’ll impact our success by delivering innovative HVAC design solutions for our...Full timeRemote work- ...Engineer - Commissioning Team Bala Consulting Engineers is a 200-person engineering firm headquartered in Wayne, PA with full-service offices in New York, NY, Boston, MA, Baltimore, MD, and Washington, DC. BALA is a dynamic growth-oriented company, built on relationships...Full timeWork at officeRemote workNight shiftWeekend work
- Job Title Mechanical, Electrical, Control Systems, Plumbing, Air Handling Units, Pumps, Heat Exchangers, Expansion Joints, and Other Building Mechanical Systems Job Description Responsible for operation, replacement, repair and maintenance of building related ...Immediate startMonday to FridayFlexible hours
- DescriptionThe Staff Substation Engineer will work under the supervision of a licensed professional engineer to develop design deliverables for new and modified high-voltage (13kV to 765kV) electrical power substation projects. The Staff Substation Engineer will work with...Work at office
- ...of Things (IIoT), our technology unlocks new levels of productivity, efficiency, and data-driven insights. We are looking for engineering students to join the Digital Industries Automation Internship Program - Process Automation Engineering Track. This position will...Hourly payPermanent employmentFull timeSummer workInternshipSummer internshipLocal areaImmediate startRelocationRelocation packageMonday to Friday
$110k - $160k
...Established A&E Firm Seeks Senior Electrical Engineer for Complex Building Projects This Jobot Job is hosted by: Kal Mayer Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $110,000 - $160,000 per year A bit...For contractorsWork at officeLocal areaRemote work- ...Structural Project Engineer Launch your structural engineering career with DCI Engineers in our Wayne, PA office. As a Structural Project Engineer, you’ll work on diverse building projects, collaborate with talented engineers and BIM designers, and grow your technical...Temporary workWork at office
- ...Skanska is searching for a dynamic Project Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to...Contract workFor contractorsSecond jobLocal area
- ...developing robust, scalable, and reproducible manufacturing processes. You will apply expertise in advanced materials processing, surface engineering, coatings, polymer and thin-film technologies, process optimization, and analytical characterization to establish the scientific...Work at officeRelocationFlexible hours3 days per week
- Overview As a member of our Citrix Engineering team, you will own, maintain, and support high-volume, large-scale, highly available virtual application and desktop platforms used by traders, analysts, operations, and other corporate users in a fast-paced, global trading...
- ...that accelerates time-to-power and delivers scalable, resilient infrastructure for mission critical environments. By integrating engineering, manufacturing, modular deployment, and lifecycle services under one platform, we streamline execution and bring complex projects...Full timeCurrently hiring
$160.12k
...perspectives. Join our team, and together we will make a difference and change the world. Job Description Are you a skilled Mechanical Engineer with expertise in HVAC and plumbing systems who is ready to take the next step in their career? This role offers the opportunity...Work experience placementH1bWork at officeLocal areaRemote workWork from home- ...Manufacturing Process Engineer Assembly Operations Job Overview We are seeking a Manufacturing Process Engineer to support manufacturing process engineering activities in final assembly operations. The ideal candidate will have experience in process validation...
- Job Description Job Description FSE needed in Boston, MA Yamazen Inc. is an importer and distributor of quality CNC manufacturing machinery, including machine tools and injection molding machines. We service manufacturers in automotive, aerospace, construction...Temporary workWork at office
- ...Our Conshohocken, PA office is looking for a talented, experienced mid-level Electrical Engineer to join our team. The ideal candidate will have a strong understanding of the engineering lifecycle related to facility design and construction in clean room, laboratories...Work at officeLocal area
- ...Electrical Engineer Or Designer My client is a top notch MEP Firm that is actively seeking an Electrical Engineer or Designer to be involved in design and production for Electrical Design and Engineering projects for professional commercial and institutional type projects...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to ENGINEER. Be the first to apply!





