Line Mechanic-D
$30.6 per hourAmerican Electric Power Co.
**Job Summary**Assist in performing work involved with the installation, rearrangement, maintenance, operation, removal, and inspection of electrical transmission and distribution facilities; drive and operate line trucks and associated auxiliary equipment. All job duties apply to overhead and underground equipment and facilities.**Job Description****\\*\\*Successful candidate must reside within the service territory\\*\\*****ESSENTIAL JOB FUNCTIONS:*** Assist with the assembly, installation, maintenance, removal and competently inspect underground facilities, conductors, fixtures, structures and other associated equipment on de-energized and grounded overhead and underground facilities under direct or immediate supervision.* Demonstrate the ability to competently perform ground person duties under immediate or direct supervision as skill level dictates.Assist with loading, unloading, handling, maintaining, installing and removing poles, towers and structures.* After completion of D-100, or equivalent experience, the employee must demonstrate the ability to operate Company equipment (with exception of digger/derricks and aerial lift vehicles), climb poles, ladders and structures, and work on de-energized conductors and equipment.* Also, may work on conductors and equipment energized up to 260 volts under direct supervision. After completion of D-200, or equivalent experience, operate digger/derrick and aerial devices, under immediate supervision as skill level dictates.* Also, under immediate supervision of a higher classification, may work on conductors and equipment energized up to 260 volts.* Assemble and install Line Material and hardware under direct or immediate supervision. Use and store hand lines, tie knots and demonstrate a basic working knowledge with ropes and rigging equipment inspection and use.* Splice primary and secondary overhead wires using the proper tools, hardware and equipment (including crimping and compression tools).* After completion of D-200, or equivalent experience, under direct supervision, the employee may operate cutouts, line switches, reclosers, and other sectionalizing devices, refuse line and transformer devices.* During this time frame, the employee may progress from direct supervision to immediate and finally general supervision as skill level dictates.* After completion of D-300, or equivalent experience, test de-energized overhead lines and equipment install and remove personal protective grounds under immediate supervision.* Inspect and maintain tools, equipment and work area in a safe, clean and orderly fashion. Identify, inspect, use and maintain all classes of rubber gloves and sleeves(PIPE), and insulating blankets, hoses and covers(IPE).Inspect, maintain, organize, operate and stock company vehicles, equipment and tools.Perform housekeeping duties as assigned.Report irregularities and abnormal conditions.* Safely execute pole top rescue and bucket truck rescue processes as training is completed5. Protect or control work area. Set and remove barricades, flags, signs, cones and associated equipment.* Maintain accurate records and submit accurate reports as required. Correctly read and record information and registered readings on analog or digital Kilowatt-hour meters. Complete Monthly Apprentice Cards and submit to local supervision for review.* Perform similar or less skilled work as assigned.The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions:* DIRECT SUPERVISION – When a qualified person is working with hands-on with the person performing the designated task.* IMMEDIATE SUPERVISION – When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task.* GENERAL SUPERVISION – An employee of higher classification, knowledgeable of the task at hand and not necessarily at the job site.* QUALIFIED PERSON – Line Mechanic or Supervisor who is knowledgeable of the task or work to be performed and is capable of performing the appropriate emergency rescue.**MINIMUM REQUIREMENTS:****Education: High school diploma or GED****Experience:** No experience required. Line work experience or line school education is preferred.**Licenses/Certifications: Must possess and maintain a valid state driver's license.** Employee shall obtain appropriate licensing as required by federal and/or state law prior to the end of the designated probationary period. Must acquire CDL beginners permit within 60 days.**OTHER REQUIREMENTS:*** Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.* Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification.* **This job requires \"recommended\" test results from HireVue Line Worker Virtual Job Tryout. This assessment is completed online, is untimed, and typically takes about 45 minutes to complete. Please refer to the Employment Test Prep section of our website You'll Get:****Hourly Salary - $30.60/hr**In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!#AEPCareers#AEPTX**Compensation Data****Compensation Grade:****Compensation Range:**$30.60 - $31.32The Physical Demand Level for this job is: H – Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. #J-18808-Ljbffr American Electric Power Co.
$28.31 - $29.76 per hour
## Line Mechanic DApply: New Philadelphia, OH: Full time: Posted Today: End Date: October 20, 2026 (10 days left to apply): R19803**Job Posting End Date**10-20-2026Please note the job posting will close on the day before the posting end date**Job Summary**Assist in performing...SuggestedFull timeApprenticeshipWork experience placementLocal areaImmediate startRelocation$36.42 per hour
## Can Line MechanicApply: On Site: Breinigsville, Pennsylvania: Full time: Posted Today: R8348**Mechanic in our Breinigsville plant** **Starting wage of $36.42 per hour** **$1.75 shift differential** Now hiring Mechanics at our Breinigsville, PA plant where stability...SuggestedHourly payFull timeTemporary workImmediate startShift workNight shift- ## Line Mechanic InternApply: Texarkana, TX: Full time: Posted Today: R19981**Job Posting End Date**Please note the job posting will close on the day before the posting end date**Job Summary**Under the direction of Distribution System Supervisor (DSS), assist and learn...SuggestedFull timeFor contractorsInternshipImmediate startShift work
$23 - $38 per hour
...departmentsTravel Requirements**Education and Experience:**- High school diploma GED- FCC certification- 2-5 years of combined bench or line experience working on Avionics components. Performing teardown, inspection, parts requisition, assembly, testing, troubleshooting,...SuggestedHourly payFull timeTemporary workFor contractorsWork experience placementWork at office- ...required within 60 days of establishing seniority. Training Training includes both classroom and field instruction: Classroom Training: Mechanical Safety Orientation and craft-specific training in locomotive electrical systems. Field Training: Hands-on experience in...SuggestedTraineeshipAll shiftsShift workNight shift
- American Electric Power Co. in Texas is seeking a Line Mechanic A to assist with installation, maintenance, and inspection of overhead and underground transmission and distribution facilities. You will operate line trucks and rigging, splice wires, and work on energized...
- ...sensors, antennas, and electromechanical assemblies. Perform precision soldering, crimping, cable routing, bonding, fastening, and mechanical integration. Execute functional, electrical, environmental, and qualification tests using documented procedures. Troubleshoot...Local areaFlexible hours
- ...professional journals, or government regulations Ability to write reports, business correspondence, or procedural manuals Excellent mechanical aptitude and a desire to work Other Requirements Experience troubleshooting and repairing aircraft avionics and airframe systems...
- Avionics Technician - Charter & Maintenance Operations Location: Long Island, NY | Ventura Air Services Are you an avionics tech who thrives on solving complex problems, turning schematics into reality, and taking projects from concept to completion? At Ventura Air Services...
- Cutter Aviation, a leading aviation services provider, seeks an Avionics Technician to perform maintenance, repairs, troubleshooting, and installations under FAA regulations and the repair station manual. You will remove and reinstall components, run checks, and resolve...
- Ventura Air Services on Long Island is seeking an experienced Avionics Technician - Charter & Maintenance Operations. You’ll perform full-cycle avionics installations, diagnose and repair systems, and interpret schematics for diverse aircraft, from GA to corporate jets....
- FEAM Aero in Los Angeles is seeking an A&P Aircraft Mechanic (Avionics) to perform line maintenance, troubleshoot avionics systems, and ensure airworthiness for departing aircraft under FARs. The role emphasizes timely, accurate documentation and collaboration with the...Flexible hoursNight shift
- STS Technical Services is seeking an Avionics Technician in Des Moines, IA. The role focuses on troubleshooting avionics and electrical systems on aircraft, ensuring safety, reliability, and regulatory compliance in a collaborative team environment. Candidates should have...
- Kendall Toyota of Anchorage is seeking a skilled Toyota Line Technician/Mechanic to join a busy service shop. You will diagnose, repair, and service a variety of vehicles with support from an on-site team dedicated to quality and efficiency. The position offers top flat...Price workRelocation package
- ...sustainability and wellbeing. Overview Perform routine construction, maintenance and repair work on high voltage electric distribution lines and equipment under direct supervision of qualified personnel. Responsibilities Use of Standards, know how to perform any general...Relocation
- * High School Diploma/ GED* Ability to successfully complete trainings provided by Airbus* Health & Safety* General aircraft familiarization* Quality Training* 2 years minimum experience as an Aircraft Avionics Technician with a focus on aircraft systems (electrical preferred...
- GE Aerospace in Clearwater seeks an Electronics Test Technician to perform production and repair operations on electronic and avionics products. The role combines hands-on soldering with board-level repair, and operation of automated inspection and rework equipment. Training...
- Lead Avionics Technician - 2nd Shift - Weekends Regular Full-Time Oscoda, MI, US 4 days ago Requisition ID: 2512 ORGINIZATIONAL RELATIONSHIP: The lead reports to the Manager and Supervisors of the department to which the lead is assigned. In the absence of the lead, ...Full timeWeekend workAfternoon shift
- ...will provide paid on the job training! Summary:Cutter Aviation is currently searching for an energetic and knowledgeable member of our Line Service team. The Line Service Technician (LST) must be an exceptional relationship builder with the drive to provide world-class...
$15 per hour
...medical, dental, vision, paid time off, along with competitive pay? Then you will love being a valued part of our award-winning team! The Line Service Professional plays a vital role to our daily operations and will provide an elite level of customer service to crew and...Hourly payFull timeWork at officeWorldwideShift workWeekend workAfternoon shift$2,000 per month
...allowing us to provide a better service for all those who enjoy the benefits of general and business aviation. Position Summary: The Line Services Technician provides ground support to arriving and departing aircraft while delivering safe, efficient, and professional...Temporary workLocal areaWeekend workAfternoon shift- ...seeking an Assistant Operator to support the Sanding department. The role involves assisting in the continuous operation of the sanding line, inspecting material quality, and monitoring machine performance. The candidate should be able to work quickly and efficiently with...
- Line Technician The Line Technician is responsible for performing vehicle repair and maintenance work as assigned in accordance with dealer and factory standards. You will oversee the work of any apprentice technician assigned to you. We have the latest Hunter equipment...Full timeApprenticeshipImmediate startRelocation packageFlexible hours
- ...Dallas, TX, US 16 days ago Requisition ID: 1207 The Production Line Technician plays a vital role in maintenance and production... ...English proficiently; bilingual preferred (English/Spanish) Basic mechanic aptitude and willingness to learn production equipment operations...Full time
- Northrop Grumman Aeronautics Systems seeks an Electrical Avionics Technician 3/4 for Whiteman AFB, MO. Responsibilities include laying out and installing electrical wiring on aircraft, testing systems, and performing repairs. A Secret clearance is required, and a prior ...Shift work
- The Aebi Schmidt Group is seeking a hands-on DA on the weld line to sand and finish welds, ensuring surfaces are smooth and ready for powder coating. This role requires attention to detail, reliability, and ability to work in high heat, dust, and chemical environments....
- Avionics Electrical Technician I in GAC Appleton Great communication skills, flexibility and ability to learn. Education and Experience Requirements High School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation...Full timeWork experience placementShift work
- ...will repair, assemble, and maintain instruments, avionics, and accessories to ensure optimal performance. Candidates should have component-level troubleshooting ability, soldering expertise, and strong mechanical skills; RF experience is a plus. #J-18808-Ljbffr Helijobs
- Description Beer Line Cleaning & Service Technician Job Duties: Responsible for breaking down and cleaning any and all parts associated... ...manager and co-workers via phone, text, email, and in-person Mechanically inclined Team player who enjoys a fast-paced, constantly...Temporary work
$37.38 - $49.07 per hour
Lead Avionics/Electrical Technician in GAC Westfield At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture...Hourly payFull timeShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Line Mechanic-D. Be the first to apply!

