Safety & Training Manager

Public Works Safety and Training ManagerThe purpose of this classification is to plan, direct, implement, and evaluate a comprehensive safety and training program for all divisions within the City of Naples Public Works Department. The Public Works Safety and Training Manager serves as the subject matter expert and principal safety officer for the Department, ensuring that all Public Works operations, facilities, personnel, and contractors are in full compliance with applicable federal, state, and local regulations, including those promulgated by the Occupational Safety and Health Administration (OSHA), the Florida Department of Environmental Protection (FDEP), the Environmental Protection Agency (EPA), and all other governing bodies. This position develops, administers, and enforces safety programs, personal protective equipment (PPE) requirements, job safety assessments (JSAs), standard operating procedures (SOPs), and training curricula across all Public Works operational areas, including Water/Wastewater Utilities, Stormwater, Solid Waste, and Traffic Operations. Work is performed under the general direction of the Director of Public Works; however, considerable latitude is granted for the exercise of independent judgment, initiative, and leadership in all matters related to departmental safety and training compliance.The following duties are normal for this position. These are not to be construed as exclusive or all-inclusive. Other duties may be required and assigned.Develops, implements, administers, and continuously updates a comprehensive departmental Safety Program covering all Public Works divisions and operational sites.Ensures full departmental compliance with all applicable federal, state, and local safety, health, and environmental regulations, including but not limited to: OSHA 29 CFR 1910 (General Industry), OSHA 29 CFR 1926 (Construction), FDEP environmental compliance requirements, EPA regulations, NFPA standards, and City of Naples Code of Ordinances.Develops, maintains, and enforces Standard Operating Procedures (SOPs) for all Public Works operational activities, incorporating applicable regulatory requirements and industry best practices.Develops and maintains Job Safety Assessments (JSAs) / Job Hazard Analyses (JHAs) for all task categories performed by Public Works personnel, updated as work methods or regulatory requirements change.Prepares, updates, and distributes Personal Protective Equipment (PPE) programs for each division, specifying minimum required PPE, inspection schedules, and replacement protocols; enforces PPE compliance in the fieldManages the Department's hazard communication program, including SDS/MSDS management, chemical inventory maintenance, and required HAZCOM training.Conducts and documents on-site monthly comprehensive safety and compliance inspections across all Public Works facilities, plant sites, and field operations, covering OSHA, FDEP, and all applicable permit requirements; issues written findings and tracks corrective actions to closure.Conducts or oversees accident/incident investigations; prepares thorough written investigative reports with root-cause analysis and corrective/preventive action recommendations; tracks implementation of corrective actions.Maintains accurate and complete safety records, training logs, inspection reports, incident documentation, and regulatory correspondence in compliance with applicable retention requirements.Serves as the management-in-charge (MIC) representative for all safety-related regulatory inspections, audits, and enforcement contacts by OSHA, FDEP, EPA, or other regulatory agencies; coordinates responses and corrective actions.Coordinates with the City's Human Resources Department on disciplinary matters arising from safety violations, accommodation requests under ADA related to safety roles, and other safety-HR intersecting matters.Develops, schedules, coordinates, and delivers a comprehensive annual training calendar for all Public Works personnel, covering mandatory regulatory training and skills-based operational training.Administers, coordinates, or delivers the following mandatory and specialized training programs:OSHA 10-Hour and 30-Hour Construction and General Industry certification coursesAsbestos Cement (AC) Pipe / AC Pipe Handling and Replacement Training, including all applicable OSHA and FDEP requirements for disturbance, handling, disposal, and documentation of asbestos-containing materials in water and wastewater pipeline operations; coordinates refresher training on required intervalsArc Flash / Electrical Safety Training (NFPA 70E), including arc flash hazard analysis, PPE selection, approach boundaries, and lockout/tagout (LOTO) integrationPPE Selection, Use, Inspection, and Maintenance Training for all divisions; annual refreshers and task-specific training as new equipment or hazards are identifiedConfined Space Entry (OSHA 29 CFR 1910.146 and 1926 Subpart AA) – Permit-Required and Non-Permit Confined Space programs; attendant, entrant, and rescue team trainingLockout / Tagout (LOTO) – Energy Control Procedures training for all applicable personnelTrenching, Excavation, and Shoring Safety (OSHA 29 CFR 1926 Subpart P)Respiratory Protection training and fit-testing coordination (OSHA 29 CFR 1910.134)Hazardous Communication (HAZCOM / GHS / SDS) trainingBloodborne Pathogen training (OSHA 29 CFR 1910.1030)First Aid, CPR, and AED certification and renewal coordinationTraffic Control Safety and Flagger Certification training (FDOT Index 600, MUTCD compliance) for Traffic Operations and all field crewsAerial / Elevated Work Platform and Scissor Lift safety trainingForklift / Powered Industrial Truck operator training and re-evaluationStormwater pollution prevention and Best Management Practices (BMP) training for field and operations staff, consistent with FDEP NPDES/MS4 permit requirementsSolid Waste operations safety training, including compactor safety, route safety, and vehicle operationsErgonomics and Musculoskeletal Injury Prevention trainingHeat Illness Prevention training and Heat Stress program (OSHA and Florida-specific standards)Driver Safety / Defensive Driving for fleet operatorsChainsaw, hand tool, and heavy equipment operational safety trainingChemical handling and spill response training for Water/Wastewater plant operatorsEvaluates training effectiveness through post-training assessments, on-the-job observations, and incident trend analysis; revises training content as needed.Coordinates with external training providers, certification bodies, regulatory agencies, and professional organizations to secure high-quality training content and certifications.Conducts comprehensive monthly on-site safety and compliance inspections at all Public Works facilities and plant sites, including Water and Wastewater Treatment Plants, Lift Stations, Public Works Operations yards, Stormwater facilities, Solid Waste operations, Traffic Operations,; documents findings and monitors corrective actions.Reviews and interprets OSHA, FDEP, EPA, and other regulatory compliance requirements and translates requirements into actionable departmental policies, SOPs, and training.Maintains and tracks all applicable regulatory permits, compliance schedules, and reporting requirements for Public Works facilities and operations.Coordinates the Department's participation in regulatory inspections and audits; prepares staff and facilities for compliance reviews.Monitors and reports on Collier County and City of Naples local safety and environmental ordinance requirements affecting Public Works operations.Maintains current knowledge of changes to federal (OSHA, EPA, DOT), state (FDEP, FDOT, DOMA), and local rules and regulations; promptly incorporates changes into departmental SOPs, training, and compliance programs.Serves as the management-in-charge (MIC) for all departmental safety and training matters; exercises independent judgment and authority on safety compliance issues, including authority to stop work where imminent danger conditions are identified.Demonstrates and promotes strong leadership skills, professional integrity, and a proactive safety culture throughout all levels of the Public Works Department.Develops, implements, and monitors internal controls related to safety program compliance, documentation integrity, and regulatory recordkeeping; reports on program effectiveness to the Director of Public Works.Prepares and presents comprehensive written and verbal reports to the Director of Public Works, City Manager, and other City leadership on departmental safety performance, incident trends, training compliance rates, and regulatory compliance status.Communicates effectively, both orally and in writing, with Public Works supervisors, crew members, department heads, City administration, regulatory agency representatives, contractors, and the public on safety and training matters.Serves as a liaison between the Public Works Department and the City's Human Resources Department on safety-related employment matters, including ADA workplace accommodations, workers' compensation coordination, and disciplinary actions related to safety violations.Promotes a positive, inclusive, and accountable safety culture by modeling safe behavior, recognizing safe work performance, and providing constructive feedback when safety standards are not met.Participates