Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Certified Welding Inspector

Magnolia River

Certified Welding InspectorMagnolia River is accepting resumes for our Certified Welding Inspector position! This position is located in the Gainesville, GA area. Some travel may be required. Your job will consist of inspecting the proper construction of natural gas transmission and distribution systems.Duties and Responsibilities:Evaluate the job, construction route, and be familiar with the traffic flow prior to project start.Walk door to door, meeting with all residential customers. Address any concerns they have before starting construction; take pictures, make detailed notes, and point out to customer any concrete or paving damage prior to starting to avoid problems later.All documentation to be uploaded into FieldLogIQ.Meet with contractor to review job and discuss any concerns they may have. Obtain crew list and confirm that they are Operator Qualified (OQ) prior to commencement of work.Document the progress of each project assigned daily in FieldLogIQ following the entry requirements outlined in the FieldLogIQ User Expectations Form. Client-specific systems and forms may be required.In conjunction with the client representative, make field recommendations on line placement when unknown conflicts come up, confirming change in writing by email with appropriate client representative.Verify tie-in points are acceptable by ensuring the line being tapped meets the minimum wall thickness by observing and documenting the measurement results of the wall thickness by the welder or corrosion specialist.Understand Best Management Practices including proper placement of silt fencing and hay socks.Visually inspect the welds and fusions on all fittings and joints and verify adherence to all manufacturer and client procedures.Maintain appropriate OQ skills. Observe proper jeeping of pipelines and document the voltage and results and visually inspect coating of welds, repair of anomalies and document the measurement of coating thickness.In conjunction with the client, determine if services need to be installed at a particular customer location. Coordinate tie-ins with construction department and service re-builds with service department.Understand meter placement for relocates and move outs outlined in the client's construction standards. As may be required by client scope of work and in a collaborative effort with the contractor, customer, and client, help resolve landscaping and/or restoration issues.Confirm accuracy of contractor documentation and/or invoices to reflect specific tasks and/or linear feet of pipe installed. Accurately complete all documentation, including, but not limited to OQ list, completion report, as–built install and retirement drawings, material list, anode cards, pressure test charts, service data, and service field orders within the allotted time frame.Understand city and county paving cut and backfill standards. Verify paving and concrete repairs with contractor.Communicate effectively, both written and orally. Comply with all safety policies, practices, and procedures. Report all incidents, near misses, accidents, incidents, or injuries as outlined in the Event Reporting Guidelines. Provide leadership to others through example and sharing of knowledge/skill. Assist the Inspection Manager with the training of incoming inspectors. Participate in proactive team efforts to achieve goals. Extensive travel required. Perform other duties as assigned.Knowledge, Skills, and Abilities:Must be able to read and understand construction prints. Must have ability to sketch construction drawings and/or to use software for construction diagrams (as-builts).Required to maintain accurate project records and documentation during construction. Must adhere to safety standards and take a proactive role in reducing safety risk. Attention to detail and high level of accuracy.Ability to rapidly establish credibility and relationships with a broad range of individuals. Ability to perform assigned responsibilities with minimal supervision. Ability to meet project deadlines.Education and Experience:High School Diploma or GED requiredAWS CWI or CPWI certification is required5 years of experience in the natural gas industry is preferred (more experience may be required by specific clients). Experience with visual inspection of both steel pipe welds and polyethylene pipe fusions, reading construction prints, and completing as-built drawings is preferred.Must possess a valid driver's license and able to operate a car or truck. Hands-on construction experience is desired.Physical Demands:Duties are performed primarily in an outdoor setting with exposure to changing weather conditions. Must be able to perform moderate physical activity including somewhat strenuous daily activities of a primarily productive/technical nature.Ambulatory across uneven surfaces of a construction excavation work zone, frequent bending at knees and waist. Must be able to perform work in a very loud, active construction environment. The person in this position frequently communicates with co-workers and clients. Must be able to exchange accurate information.

Vacancy posted 2 hours ago
Similar jobs that could be interesting for youBased on the Certified Welding Inspector in Gainesville, GA vacancy
  •  ...foothills of the Blue Ridge Mountains and surrounded by Lake Lanier. Our high-volume Service Departmentis looking for a full-time Ford Certified Technicianwho wants to build skills, increase earning potential, and advance their career. Ford pays for all training, helping you... 
    Suggested
    Full time
    Relocation package
    Monday to Friday
    Weekday work

    Greene Ford

    Gainesville, GA
    3 hours ago
  • Job Type: Full-time, Part-time Position: Certified Medication Technician (CMT) About Cedarhurst: Cedarhurst Senior Living is a leading provider of senior living communities, dedicated to enriching the lives of residents through exceptional care and personalized services... 
    Suggested
    Full time
    Part time
    Work at office
    Shift work

    Cedarhurst Senior Living

    Oakwood, GA
    11 hours ago
  • $24 - $34 per hour

     ...$24/hr - $34/hr Requirements Erect structural steel — columns, beams, bracing, connection plates, and embed plates Fit and weld structural connections per project specifications Rig, signal, and assist with crane picks and material moves Read and work from... 
    Suggested
    Hourly pay
    For contractors
    Apprenticeship

    Hilton Mechanical Contractors

    Gainesville, GA
    4 days ago
  •  ...preferred Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred Welding skills are a plus Strong customer service and communications skills are required Typical Work Week ~5 Days, Off every Sunday... 
    Suggested
    Monday to Friday

    Meineke Car Care Center

    Gainesville, GA
    24 days ago
  •  ...Complete emergency breakdown repairs as needed Perform field welding and fabrication Operate aerial lifts and powered industrial...  ...OSHA 30 preferred ~ NCCER or trade certification a plus ~ Certified rigging and signal person preferred ~ Strong troubleshooting... 
    Suggested
    Hourly pay
    Monday to Friday
    Shift work
    Night shift
    Weekend work
    Day shift

    IMMEC

    Flowery Branch, GA
    7 hours ago
  •  ...TIG Welding Technician*MUST HAVE TIG WELDING EXPERIENCE. NO EXCEPTIONS.*Performs welding tasks using established techniques and procedures.Prepares, welds, and finishes fabrications, ensuring product quality.Sets up and calibrates welding equipment according to technical... 
    Work experience placement

    JBT Marel

    Gainesville, GA
    1 day ago
  •  ...Job Type Full-time Description Welders are responsible for fitting and welding of steel, aluminum and stainless- steel parts using a MIG and/or TIG process and also to ensure each job is ran with safety, accuracy and timeliness in the welding area... 
    Full time

    Mp Equipment

    Gainesville, GA
    3 hours ago
  • Maintenance Mechanical TechnicianAn experienced, hands-on Maintenance Mechanical Technician with strong mechanical troubleshooting skills and at least five years of manufacturing maintenance experience is needed. Independently maintain, troubleshoot, repair, install, and...
    Full time
    Afternoon shift

    Staff Financial Group

    Gainesville, GA
    1 day ago
  • $21.38 - $29.39 per hour

     ..., Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hydraulic Mechanic, ASE Certified Mechanic, IFPS Certified Technician Base Pay Range: $21.38 - 29.39 Starting rate of pay may vary based on factors including, but... 
    Full time
    Temporary work
    Flexible hours

    Sunbelt Rentals

    Gainesville, GA
    3 hours ago
  •  ...they have a great opportunity for a talented and motivated TIG Welder to join their team! Welders are responsible for fitting and welding steel, aluminum and stainless steel parts using a MIG and/or TIG process and also to ensure each job is run with safety, accuracy... 

    Vitruvian Consulting, Inc.

    Gainesville, GA
    23 days ago
  • $18 - $35 per hour

     ...Job Description Job Description Description: Automotive Service Technician (ASE Certified) Toyota ASE Certified Automotive Service Technician Location: Gainesville, GA Pay: $18.00 - $35.00 per hour Sign-On Bonus: Up to $2,000 Based on Certification Level... 
    Hourly pay
    Full time
    Temporary work
    Relocation package

    Milton Martin Toyota

    Gainesville, GA
    5 days ago
  • Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make and deliver products that...
    Work experience placement
    Local area
    Relocation
    Day shift

    Cargill

    Gainesville, GA
    2 days ago
  •  ...innovation, and growth. Don't let our name fool you, in addition to our fast oil change bays, our locations can be your one-stop shop with certified technicians providing a variety of mechanical services, as well as tire services.The Hood Technician is responsible for inspecting... 

    Express Oil Change & Tire Engineers

    Gainesville, GA
    2 days ago
  • Maintenance Mechanical Technician The Maintenance Mechanical Technician is a senior-level role responsible for safe planning and independently executing maintenance, repair, and modification of complex machinery. This position emphasizes advanced troubleshooting, Total...
    Shift work

    KUBOTA Manufacturing of America

    Gainesville, GA
    3 days ago
  • $70k - $90k

     ...Job Title: Production Supervisor Welding Salary $70,000 to $90,000 Annual Salary Job Description The Production Supervisor Welding leads daily welding operations to support scheduled production, quality objectives, and customer delivery requirements. This... 
    Weekly pay
    Full time
    Contract work
    Temporary work
    For contractors
    Immediate start
    Monday to Friday

    Aerotek

    Flowery Branch, GA
    4 days ago
  •  ...Transportation Security Inspector – Aviation Opportunities in Gainesville Transportation Security Inspectors help ensure that airports, air carriers, cargo facilities, and other regulated aviation organizations follow federal transportation-security requirements. Rather... 
    Full time
    Work at office
    Local area
    Flexible hours
    Night shift

    Airport Jobs Placement

    Gainesville, GA
    15 days ago
  •  ...and structural steel weldments. Fabricator must be able to read blueprints and drawings; plan layouts and procedures; determine what welding equipment and methods to use based on requirements; set-components to specifications; prepare and align parts for welding; join... 

    PDBLOWERS INC

    Gainesville, GA
    2 days ago
  • Benefits: 401(k) 401(k) matching Competitive salary Training & development NeoVolta Power, LLC is building one of the next-generation battery manufacturing platforms in the United States — and we’re looking for talented individuals to help power the future ...
    Shift work

    NeoVolta Power LLC

    Pendergrass, GA
    2 hours ago
  • Senior Engineer Plays a key role in analyzing, designing, and optimizing systems and processes within manufacturing or operations environment. This position supports and leads moderately complex projects aimed at improving efficiency, reducing costs, and enhancing product...

    Fox Service Company

    Gainesville, GA
    2 days ago
  • $20 - $24.25 per hour

     ...seeking dependable and motivated  MIG Welders/Fabricators to join a fast-paced manufacturing team. The ideal candidate will have welding experience, a strong commitment to quality, and the ability to work safely and efficiently. Key Responsibilities Perform... 
    Hourly pay
    Local area
    Monday to Friday
    Flexible hours
    Shift work
    Weekend work
    Day shift
    Afternoon shift

    PRT Staffing

    Gainesville, GA
    2 days ago
  • Job Description Job Description This job is posted on behalf of Vitruvian Consulting, Inc. by Top Echelon. Are you ready to take your skills as a CNC Operator to the next level? We're looking for someone just like you to join a dynamic team in Gainesville, GA! This...
    Relocation
    Afternoon shift

    Vitruvian Consulting, Inc.

    Gainesville, GA
    23 days ago
  •  ...Quality Control Inspector Flowery Branch, GA, United States Medical Device Manufacturer About the Job Quality Control Inspector Quality Control Inspectors are essential to ensure that all aspects of production meet the regulatory standards and company quality... 

    Terrelonge Staffing Solutions Inc.

    Flowery Branch, GA
    1 hour ago
  • Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...

    Home Depot

    Gainesville, GA
    2 days ago
  •  ...YEAR POTENTIAL EARNINGS $8OK If You're the Best at Sales, You Have a Place with the Best in Pests As an Orkin Home Sales Inspector , you get the advantage of a highly persuasive pitch: top-notch protection from an iconic brand name and the industry leader with... 

    Orkin

    Gainesville, GA
    3 days ago
  • CNC Machinist Orbital Energy Services, a Power Services Group company, specializes in the repair, refurbishment, and manufacturing of precision components for the power-generation industry. We are committed to safety, quality, technical excellence, and delivering reliable...
    Shift work

    Power Plant Services

    Gainesville, GA
    3 days ago
  •  ...Orkin Home Sales Inspector As an Orkin Home Sales Inspector, you get the advantage of a highly persuasive pitch: top-notch protection from an iconic brand name and the industry leader with almost 125 years of experience. That's backed by award-winning training that... 

    Orkin Global Pest Control

    Gainesville, GA
    1 day ago
  •  ...Position Summary: The Quality Inspector is responsible for ensuring that all products and processes meet VDL Industries Gainesville quality standards, customer specifications, and regulatory requirements. This role performs inspections, conducts testing, documents findings... 

    VDL USA Holding Inc

    Flowery Branch, GA
    2 hours ago
  • Manufacturing Engineer We are seeking a motivated Manufacturing Engineer to support site operations and drive continuous improvement initiatives within a manufacturing environment. This individual will work closely with operations leadership and the Site Continuous ...

    gpac

    Gainesville, GA
    2 days ago
  • CNC OperatorMP Equipment, a Middleby company, has been in business for more than 50 years providing state-of-the-art processing equipment for our partners in the food industry. We specialize in providing total line solutions—from consultation through system design, manufacturing...
    Relocation

    Mp Equipment

    Gainesville, GA
    4 days ago
  • Job Description Manufacturing Engineer Who: A hands-on Manufacturing Engineer with 2-3+ years of engineering experience who thrives on improving safety, quality, productivity, and manufacturing processes. What: Design, develop, implement, and optimize manufacturing...
    Full time
    Work at office
    Monday to Friday

    Staff Financial Group

    Gainesville, GA
    1 hour ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Certified Welding Inspector. Be the first to apply!