Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Manual Machinist II

Altamira Material Solutions

Position Summary

The Manual Machinist II is responsible for independently setting up, operating, inspecting, and troubleshooting conventional machining operations using manual lathes, mills, grinders, drill presses, saws, and related equipment. This role requires the ability to interpret complex prints, apply common GD&T requirements, determine machining methods, select appropriate tooling, and perform in-process inspection to ensure parts meet quality and production standards.

A Manual Machinist II is a fully independent machinist for standard and moderately complex machining work. This role is expected to maintain productivity and quality, resolve common machining issues, support multiple machining operations where applicable, and assist less experienced machinists as needed.

Key Responsibilities Machine Setup, Operation, and Productivity
  • Independently set up and operate manual machining equipment for standard and moderately complex work using prints, work instructions, fixtures, tooling, and manufacturing requirements.
  • Perform machine setups, workholding installation, tooling selection, machine alignment, and preparation required for assigned jobs.
  • Determine appropriate machining methods, machining sequences, cutting tools, speeds, and feeds to efficiently produce quality parts.
  • Perform turning, milling, drilling, tapping, boring, grinding, reaming, threading, and related machining operations as required.
  • Support quality and efficiency by managing setup times, production flow, and multiple assignments where applicable.
  • Monitor tooling, machine conditions, and part quality throughout production and respond appropriately to prevent scrap, rework, or downtime.
  • Produce prototype, repair, low-volume production, and custom-machined components as assigned.
  • Maintain equipment, tooling, and work areas in accordance with company standards.
Blueprint Reading, GD&T, and Inspection
  • Read and interpret complex prints, specifications, dimensions, tolerances, notes, and work instructions.
  • Understand and apply common GD&T controls and datum requirements during setup, machining, and inspection.
  • Perform full in-process inspection using calipers, micrometers, indicators, gauges, height gauges, bore gauges, and other required measuring instruments.
  • Verify that parts meet dimensional, visual, and customer requirements before continuing production or releasing work to the next operation.
  • Identify nonconforming or questionable parts and follow procedures for escalation, containment, documentation, and corrective action support.
  • Maintain accurate production and inspection records in accordance with company procedures.
Troubleshooting, Tooling, and Materials
  • Resolve common machining issues related to tooling, surface finish, dimensional variation, machine alignment, workholding, and material conditions.
  • Select appropriate tooling independently for standard work and recommend tooling changes when needed.
  • Understand the machining behavior of common and difficult-to-machine materials and make appropriate adjustments within established guidelines.
  • Verify machine setups, workholding methods, and tooling arrangements are properly secured, aligned, and suitable for the operation.
  • Communicate recurring production, quality, tooling, or equipment concerns to supervisors, leads, engineering, or quality personnel as appropriate.
Team Support and Continuous Improvement
  • Assist Manual Machinist I employees and production personnel with setup questions, inspection requirements, troubleshooting, and process understanding as needed.
  • Suggest improvements to machining methods, tooling, inspection techniques, safety, quality, and production efficiency.
  • Support cross-functional problem resolution with supervisors, leads, quality, engineering, production, and maintenance personnel.
  • Maintain a clean, safe, organized work area and model safe work practices for less experienced employees.
  • Support training and knowledge sharing to improve department capability and consistency.
Qualifications Education
  • High school diploma or GED required.
  • Technical school, vocational machining training, apprenticeship coursework, or equivalent manufacturing training preferred.
Required Experience
  • Minimum of 3 years of manual machining experience.
  • Experience performing independent machine setups on manual lathes, mills, grinders, and related equipment.
  • Experience reading complex prints and applying common GD&T requirements.
  • Experience performing in-process inspection using standard measuring tools.
  • Experience producing precision-machined components to close tolerances.
Skills and Competencies
  • Ability to independently set up and operate manual machining equipment for standard and moderately complex work.
  • Ability to read complex prints, specifications, dimensions, and tolerances.
  • Working knowledge of common GD&T controls and inspection requirements.
  • Ability to perform full in-process inspection using calipers, micrometers, indicators, gauges, height gauges, and related tools.
  • Ability to determine machining methods, tooling requirements, speeds, and feeds to maintain quality and productivity.
  • Strong tooling, machining, and material knowledge for standard and moderately complex machining work.
  • Ability to troubleshoot common machining issues and identify opportunities for improvement.
  • Ability to assist and support less experienced machinists.
  • Strong attention to detail, accountability, teamwork, and commitment to safety and quality.

Direct Reports

  • None.

However, this position will be tasked to provide technical guidance, training support, and day-to-day assistance to other Operators and less experienced machinists as assigned.

Work Environment

This position works in a manufacturing environment and requires regular work with manual machines, tooling, fixtures, materials, and production equipment. The employee may be exposed to noise, moving mechanical parts, coolant, chips, dust, oils, temperature changes, and other conditions commonly found in a machining or manufacturing environment.

The employee is required to follow all safety procedures and wear required personal protective equipment, which may include safety glasses, hearing protection, gloves, steel-toe shoes, or other protective equipment depending on the work area and assigned task.

Physical Requirements

The physical requirements described below are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to stand and walk for extended periods of time during the work shift.
  • Ability to use hands and fingers to handle parts, tools, gauges, fixtures, controls, and other equipment.
  • Ability to reach, bend, stoop, kneel, crouch, twist, and move around machines and work areas as needed.
  • Ability to lift, carry, push, or pull up to 35 pounds occasionally, and lesser amounts frequently.
  • Ability to perform repetitive motions, including loading and unloading parts, setting up tools and fixtures, and operating machine controls.
  • Ability to visually inspect parts, read complex prints, review inspection results, and identify defects or machining concerns.
  • Ability to hear machine alarms, verbal instructions, and other workplace safety signals with or without reasonable accommodation.
  • Ability to wear required personal protective equipment for the duration of assigned tasks.

Additional Responsibilities

  • Perform other duties as assigned to support production, quality, safety, and business needs.
  • Follow all company policies, procedures, work instructions, and safety requirements.
  • Maintain regular and reliable attendance.
  • Support a work environment that promotes accountability, teamwork, safety, quality, and continuous improvement.

Job Description Statement

This job description is intended to describe the general nature and level of work being performed by employees assigned to this position. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions associated with the role. The Company reserves the right to modify, add, or remove duties and assign other responsibilities as needed.

Reasonable Accommodation Statement

The Company is committed to providing reasonable accommodation to qualified individuals with disabilities, unless doing so would create an undue hardship. Employees who require accommodation to perform the essential functions of the position should contact Human Resources.

Employment Statement

Employment with the Company is at-will, meaning either the employee or the Company may terminate the employment relationship at any time, with or without notice, and with or without cause, subject to applicable law.

Evantic is an Equal Opportunity Employer and provides equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law.

2nd shift: 2:00pm - 10:30pm
Monday - Friday

PI978cd2b0426a-26289-41229802

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Manual Machinist II in Missouri City, TX vacancy
  •  ...Summary : The role of Machinist II involves advanced responsibilities in adhering to all company HSEQ processes and procedures, reviewing and comprehending complex dimensional drawings, and performing setup and operation of turning and milling equipment for... 
    Suggested

    PVI Holdings, Inc.

    Stafford, TX
    2 days ago
  •  ...-motivated and open minded to lean our machining and safety procedures Efficiently, carefully, and accurately sets-up and operates manual mills and lathes and has lengthy experience using a horizontal boring mill on a wide variety of diversified work Lays out work and... 
    Suggested
    Temporary work
    Work experience placement
    Flexible hours

    Chart Industries

    Stafford, TX
    5 days ago
  • $37.5 per hour

     ...-motivated and open minded to lean our machining and safety procedures Efficiently, carefully, and accurately sets-up and operates manual mills and lathes and has lengthy experience using a horizontal boring mill on a wide variety of diversified work Lays out work and... 
    Suggested
    Hourly pay
    Full time
    Contract work
    Temporary work
    Work experience placement

    Ameri-Force

    Stafford, TX
    4 days ago
  • $37.5 per hour

     ...motivated and open minded to lean our machining and safety procedures Efficiently, carefully, and accurately sets-up and operates manual mills and lathes and has lengthy experience using a horizontal boring mill on a wide variety of diversified work Lays out work... 
    Suggested
    Hourly pay
    Full time
    Contract work
    Temporary work
    Work experience placement

    Ameri-Force

    Stafford, TX
    a month ago
  • $30.91 - $46.2 per hour

     ...brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary We are seeking an experienced Manual Machinist to support our repair, remanufacturing, and aftermarket service business in our Houston PRO Services facility located in... 
    Suggested
    Temporary work

    ITT Cannon

    Stafford, TX
    5 days ago
  • $30.91 - $46.2 per hour

     ...Manual Machinist We are seeking an experienced Manual Machinist to support our repair, remanufacturing, and aftermarket service business in our Houston PRO Services facility located in Stafford, Texas. This position is responsible for performing precision machining... 
    Temporary work

    Goulds Pumps IPG LLC

    Stafford, TX
    1 day ago
  •  ...motivated and open minded to lean our machining and safety procedures Efficiently, carefully, and accurately sets-up and operates manual mills and lathes and has lengthy experience using a horizontal boring mill on a wide variety of diversified work Lays out work... 
    Temporary work
    Work experience placement

    Zobility

    Stafford, TX
    22 days ago
  •  ...manufacturing sequences. Read, interpret, manually edit, and troubleshoot raw "G" and "M"...  ...safety. Collaborate with shop floor machinists to resolve setup issues, optimize toolpaths...  .... Preferred Qualifications Compact II programming experience is a plus.... 
    Full time
    Work at office

    Texas Shapes Inc

    Sugar Land, TX
    24 days ago
  •  ...Job Description Position Summary & Objective Machinist II is responsible for setting up, programming, operating, and maintaining CNC machines to produce high-precision components used in hydro turbines and complete turbine assemblies. This role involves interpreting... 

    Eurofins USA Environment Testing

    Stafford, TX
    2 days ago
  •  ...and effectively perform essential job duties. This includes: Reading and interpreting work orders, safety instructions, machine manuals, and technical drawings written in English Understanding and following verbal and written safety communications Communicating... 
    Temporary work
    Immediate start
    Flexible hours
    Afternoon shift

    Emerson

    Stafford, TX
    4 days ago
  • $25 - $35 per hour

     ...Job Description Job Description CNC Mill Machinist – Setup & Operation Location: North Houston, TX (Near Beltway 8 and Hardy Toll Road) Pay: $25.00–$35.00 per hour, based on experience Schedule: 1st Shift | 40 hours per week Job Type: Full-Time | Direct... 
    Hourly pay
    Permanent employment
    Full time
    Shift work
    Day shift

    One Stop Machine Shop

    Sugar Land, TX
    6 days ago
  •  ...stairs; stoop, kneel, crouch, or crawl; ability to bend, twist and stand; move throughout the store; and talk to and hear customers. Manual dexterity to perform non-selling responsibilities, such as use of POS (Point of Sale) terminals, counting money, steaming garments,... 
    Part time

    David's Bridal

    Sugar Land, TX
    2 days ago
  •  ...Randstad - [Production Operator / Machinist] As a Machine Operator at Randstad, you'll: Operate equipment and/or second-operation machines; Perform various tasks, such as inspecting, trimming, testing, fixing, assembling, and packaging products; Set up machines according... 
    Immediate start

    Randstad

    Missouri City, TX
    1 day ago
  • $24 - $28 per hour

     ...CNC Machinist Shift/Hours: Monday - Thursday 7AM to 6PM, Friday 7AM to 4PM + Overtime Pay Rate: $24 - $28 per hour/ DOE Location...  ...Diploma or Equivalent ~7 Years of experience with CNC and/or Manual Machining ~ Ability to hold tolerances within .0005" ~... 
    Hourly pay
    Temporary work
    Immediate start
    Shift work

    PrideStaff

    Richmond, TX
    2 days ago
  •  ...Job Description Are you currently going to school to become a machinist? Have you ever considered beginning a different career path?...  ...industry experience, ERP system, 3D CAD software, and on-site manual and computer-aided machines, we are a one-stop-shop for industry... 
    Full time
    Apprenticeship
    Worldwide
    Afternoon shift

    Welker, Inc

    Sugar Land, TX
    10 days ago
  • Job Description Job Description Looking for an experienced bridal seamstress who enjoys working one-on-one with brides through the entire alteration process. Independent contractor role with bookings provided through our platform. The Work • Conduct first, second, ...
    For contractors
    Local area

    Thimble Alterations

    Richmond, TX
    7 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Manual Machinist II. Be the first to apply!