Composite Materials & Process Technician
$29 - $36 per hourFull-time
Joby Aviation
Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service. Overview Working as a Composites M&P Technician you will support the materials qualification effort leading to the development, certification, and production of eVTOL aircraft. The role requires composite fabrication and laboratory experience. The ideal candidate will possess the ability to work with minimal supervision. Responsibilities
- Interpret and work to a variety of engineering drawings and specifications for the fabrication of a variety of composite laminate and bonded composite panel types
- Layup of prepreg composite panels, including honeycomb core structures
- Structural bonding of cured composite laminate panels – including hybrid joints, using various types of two-part epoxy adhesives as well as single and two-part sealant materials
- Mold prep and maintenance of tooling plates, caul plates, panel bonding fixtures, and a variety of hand-tools used for composite layup and adhesive bonding
- Use of a variety of calibrated dimensional inspection tools (including calipers, calibrated scales, micrometers, etc.)
- Interpreting and working to a variety of ASTM, SACMA, and MIL-SPEC standards for a variety of material characterization and development tests
- Responsible operation of electromechanical test frames, test fixturing, thermal test chambers, environmental conditioning chambers, and relevant software on testing workstations
- Performing calculations in both standard and metric units
- Maintaining a clean, safe, and organized workspace
- Following all Joby safety procedures, including all OSHA regulations/requirements
- Independently determining appropriate fabrication, bonding, and inspection methods and procedures for new or non-standard assignments, identifying effective solutions to unique or unusual issues
- Providing recommendations for process improvements and updates to work instructions, and offering input or feedback on the work of less experienced technicians
- Understanding the interdependencies between own work and related workstreams (e.g., tooling, testing, quality, program schedule) to support broader program objectives
- Minimum of 4 years of composite fabrication experience, with demonstrated ability to exercise independent judgment and initiative on new or non-standard assignments (additional experience working in a materials lab or aviation/aerospace setting is highly preferred)
- Minimum of High School diploma or equivalent (an Associates degree or equivalent trade certification in composites is a plus)
- Strong math skills and a knowledge of engineering documentation, drawings, and models (understanding of and familiarity with GD&T)
- Ability to read and operate inspection equipment including calipers, micrometers, height-gauges, microscopes, and scales
- Basic knowledge of prepreg composites and material properties (including twill and uni-directional prepregs, paste and film adhesives, and honeycomb core)
- Ability to lift >50 lbs. unassisted and stand at work station for extended periods of time (>4 hours), not including meals and break times
- MS Office Suite and general computer skills (experience with multiple types of test equipment software is a plus)
- Experience in a materials lab or aviation/aerospace setting
- Associate's degree or trade certification in composites
- Experience in a materials qualification setting
- Fundamental understanding of composite test standards and common failure modes
- Excellent technical aptitude and analytical skills
- Highly developed attention to detail and critical thinking skills
Vacancy posted 7 days ago
Similar jobs that could be interesting for youBased on the Composite Materials & Process Technician in California vacancy
$29 - $36 per hour
...our commercial service. Overview Working as a Composites M&P Technician you will support the materials qualification effort leading to the development,... ...or unusual issues Providing recommendations for process improvements and updates to work instructions, and...CompositeFull timeTemporary work- ...Processing Technician IWe are seeking a Processing Technician I to support manufacturing operations involving prepreg, adhesive products, and ceramic matrix composite (CMC) materials. This position is responsible for assisting with production activities, including the...CompositeCasual workMonday to FridayShift work
$25.8 - $38.7 per hour
...your mark on the product, the process, and the culture, but far... .... About the Team: The Materials and NDE (Non-Destructive Evaluation... ...manufacturing to advanced composites, the team works at the... ...Work with engineers and other technicians to coordinate testing priorities...Composite- ...Job Description Description As a Materials Engineering Technician at Impulse, you will anchor our mechanical... ...advanced metals, polymers, composites, and ceramic that make up our orbital... ...the end-to-end specimen preparation process, ensuring precise dimensional tolerances...CompositePermanent employmentFull time
$23 - $27 per hour
...goal of enabling human life on Mars. MATERIALS TECHNICIAN, DISPENSARY (GLUE FACTORY) - 2ND SHIFT... .... Read and follow engineering process specifications, SOPs, and work instructions... .... ~2+ years of experience in composite fabrication, bonding, or chemical processes...CompositePermanent employmentTemporary workLocal areaMonday to FridayWeekend workAfternoon shift$22 - $47 per hour
...space economy. Vast is looking for a Materials Testing Technician , reporting to the M&P Supervisor... ...materials and manufacturing processes for flight applications. This will... ...metals, polymers, adhesives, coatings, composites, elastomers, and other materials used...CompositeFull timeTemporary workWeekend work$98k - $149.25k
...and delivery schedule requirements for composite fabrication, composite & mechanical subassemblies... ..., and improvement of manufacturing processes with a focus on efficiency and... ...problem solving to resolve issues related to materials, design, equipment, and peopleWorks on Manufacturing...CompositePermanent employmentFull timeContract workWork experience placementWork at office$117.5k - $179.25k
...continuous improvement of manufacturing systems, processes, equipment, tooling, and documentation.... ...sheet metal fabrication, plastics, and composite layups.Identify manufacturing risks and... ...related to processes, equipment, materials, capacity, tooling, suppliers, quality,...CompositePermanent employmentFull timeContract workWork experience placementWork at office- ...Job Description Job Description Job Title: Process Technician Job Location: Cypress, CA Job Duration: 12 months on W2 Shift: 1... ...Description: A leader in the Client application of Ceramic Matrix Composites, our High Temperature Composites team is growing very...CompositeWork at officeShift workDay shiftAfternoon shift
$103k - $130k
PPG Aerospace is seeking an experienced Senior Process Engineer to lead the design, control, and advancement of our manufacturing... ...Robotics is desirableExperience with performance coatings, composite material is a plus#LI-ONSITEThe base salary range for this position is...CompositeShift work$800 per month
...Office Hours is seeking experienced materials science researchers to contribute to an... ...materials, energy materials, biomaterials, composites, nanomaterials, materials chemistry or... ...computational materials science, characterization, processing, and related areas. Ideal...CompositeFor contractorsWork at officeRemote work$124k - $186k
...to leave your mark on the product, the process, and the culture, but far enough along that... .... Join us. About the Team: The Materials and NDE (Non-Destructive Evaluation)... ...and additive manufacturing to advanced composites, the team works at the intersection of innovation...CompositeFlexible hours$30.27 - $34.01 per hour
...Join to apply for the Materials Management Technician III role at Dignity Health 3 days ago Be among the first 25 applicants Join to apply for the... ...orderly manner. Participants in inventory/cycle counting process per department procedure. Responsibilities Under direction...Full timeWork experience placement$27 per hour
...Manufacturing Technician 1 - San Diego, CA 3 month contract-to-hire, ~$27/hr BOE Position is for an aerospace/defense client. United... .... Responsibilities Support the assembly of various composite and metallic components. Read and comprehend Manufacturing Work...CompositeContract work- ...looking for a Manufacturing Technician for our direct client based... ...software systems and manufacturing processes. *) Strong teamwork, time-... .... *) Familiarity with composite and metallic components. *... .... *) Experience with material preparation. Skills:...Composite
$38.4 - $57.6 per hour
...to leave your mark on the product, the process, and the culture, but far enough along that... ...is waiting. Join us.About the Team:The Materials and NDE (Non-Destructive Evaluation)... ...and additive manufacturing to advanced composites, the team works at the intersection of innovation...Composite- ...-Ross is seeking multiple Manufacturing Technician 1's for a contract opportunity in San Diego... ...: Support the assembly of various composite and metallic components. Read and... ...Bonding. Aerospace Manufacturing. Material Preparation. REQUIRED EDUCATION...CompositeContract workLocal area
- ...excellence.Position SummaryAs a Quality Technician, you will have the opportunity to cover... ...testing of the ceramic matrix composites components manufactured on site. You will... ...broad range of experts in the fields of materials, manufacturing and test engineering. This...CompositePermanent employmentRotating shiftWeekend work
- ...Description Mineral Processing Technician Support Safe Reliable Production Through Accurate Testing and Process Improvement How You Will Create Value Completes pilot and laboratory test programs to ensure quality. You will perform basic laboratory analysis...Full timeLocal areaImmediate start
$41.54 - $51.92 per hour
...everyday essentials, safely and reliably. We’re seeking a Production Technician to build and maintain our unmanned aerial vehicles (UAVs) and... ..., and flex cables Familiarity with fabrication in plastics, composites, and metals Skill in troubleshooting and reworking complex...CompositeFlexible hours- ...ultimate goal of enabling human life on Mars.MATERIALS ENGINEER, POLYMERS (DRAGON)As an... ...creativity to solve difficult material and process challenges to enable highly reliable, low... ...protection systems (TPS), textiles, and composites.Provide guidance to engineering and...CompositePermanent employmentTemporary workInternshipWeekend work
$22 - $25 per hour
...Production Technician I-TPToray Advanced Composites (TAC) is a leading supplier of advanced composite materials for the aerospace, sporting goods, motorsport, and industrial markets... ...Entry technician will review the quality process and should be able to identify quality...CompositeHourly payShift workDay shiftAfternoon shift- ...Manufacturing Technician 1 Company: Northrop Grumman Corporation... ...supporting the assembly of composite and metallic components, following... ...and metallic components or materials. Previous experience in... ...# Manufacturing Processes # Material Preparation...CompositeContract work
- ...Quality Technician I The Quality Technician I will support Toray’s quality team in... ...training is encouraged. ~ Familiarity with composite materials, specifically carbon fiber and... ...acid digestion Use of Pycnometer and processes to perform density testing Analytical...CompositeShift work
- ...Aerotek - JobID: JP-005850760 [Production Operator / Assembly Line Worker] As a Composite Technician at Aerotek, you'll: Perform production processes such as tape wrapping, cutting, bonding, lay-up, and bagging; Measure and visually inspect products; Set up, operate, or...CompositeImmediate start
- ...benefits, culture, and its talent-first flexible/remote work approach, see below and visit . About the Role: The Materials Management Technician is responsible for supporting day-to-day operations related to receiving, quarantine, sampling, labeling, release,...Full timeWork at officeLocal areaRemote workMonday to FridayFlexible hours
$22 - $27 per hour
...MATERIAL FLOW TECHNICIAN - 1ST SHIFT SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally... ...Flow Technicians are focused on setting up physical processes and system configuration to support new production cell and...Permanent employmentTemporary workWeekend workDay shift$25.92 - $38.88 per hour
...Description Job Title: Quality Technician Working Pattern: Fulltime... ...of the ceramic matrix composites components manufactured on site... ...of experts in the fields of materials, manufacturing and test... ...and housekeeping standards Process, prepare and analyze inspection...CompositeHourly payPermanent employmentFull timeRemote workRelocation packageFlexible hoursRotating shiftWeekend work$113.5k - $194k
...and passionate engineer to support our composite materials qualification effort, leading to the... ...test plansAuthor and maintain materials, process, and test specifications and advise on... ..., and advise and mentor engineers and technicians on test methods and data...CompositeFull timeTemporary work$33 per hour
...Team is hiring a Production Technician to own assigned production work... ...and manufacturing processes, provide feedback when documentation... ...tools, fixtures, gauges, materials, and equipment, and ensuring... ...include handling carbon-fiber composites and industrial-grade adhesives...CompositeLocal areaImmediate startMonday to Friday
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Composite Materials & Process Technician. Be the first to apply!
Related searches
- aerospace composite California
- composite California
- composites engineer California
- construction materials California
- preferred materials California
- building materials California
- materials testing California
- material coordinator California
- construction materials testing California
- materials supervisor California




