Aircraft Avionics Technician

Aircraft Avionics Technician (F/A-18 E/F)This role provides organizational level ("O" level) support for F/A-18 E/F aircraft electrical and avionics systems. You will perform pre- and post-flight inspections, maintain and repair complex avionics components, and troubleshoot systems to ensure safe and reliable aircraft operation. The position requires hands-on work with radar, communications, weapons, display, and data bus systems, as well as the ability to interpret technical documentation and support other technicians with expert guidance.Responsibilities:Perform organizational level support for F/A-18 E/F aircraft electrical and avionics systems.Conduct pre- and post-flight activities and inspections in accordance with applicable procedures and technical publications.Read and interpret wiring schematics, assembly drawings, process specifications, technical manuals, written instructions, and test procedures.Set up and use torque wrenches and common hand tools such as wrenches and safety wire pliers to perform maintenance and repairs.Operate specialty tools including crimpers, multimeters, and pin extractors to support troubleshooting and component servicing.Remove, replace, and function check aircraft components and assemblies to verify proper operation after maintenance.Perform wire repair including splicing, soldering, and assembly/disassembly of multi-pin and coaxial connectors.Test, troubleshoot, and properly handle fiber optic conductors used in aircraft systems.Inspect and maintain APG-73 and APG-79 (AESA) radar systems, tactical warfare systems (ALE-47 and ALR-67), and F/A-18 weapon systems including FLIR.Inspect and maintain UHF/VHF communication systems and APX-111 IFF systems.Maintain multipurpose displays, including the Joint Helmet Mounted Cueing System and associated video recording equipment.Apply a basic understanding of 1553 data bus operation to assist in system troubleshooting.Perform software loading and verification for the F/A-18 mission computer and other software-controlled systems.Demonstrate comprehensive knowledge of all aircraft avionics systems aboard the F/A-18 and troubleshoot complex technical problems.Provide technical advice, training, and troubleshooting assistance to organizational level technicians as needed.Use Interactive Electronic Technical Manuals (IETMs), wire illuminator tools, NAMP 4790, and applicable NAVAIR technical publications to perform and document work.Prepare clear written reports for management in support of contractual obligations and maintenance documentation requirements.Document maintenance and repair actions, equipment status tags, logs, and parts requests accurately and in a timely manner.Comply with all health and safety rules and regulations, including tool control, foreign object damage (FOD) control, and all required training and certifications.Perform assigned duties while wearing required safety equipment and adhering to established safety protocols.Work flexible schedules as needed to meet customer maintenance requirements, including support for day and night shift operations.Essential Skills:At least 3 years of hands-on F/A-18 E/F experience, including inspections, servicing, troubleshooting, removals, and repairs.Aircraft avionics technician with experience supporting organizational level maintenance of electrical and avionics systems.Ability to read and interpret wiring schematics, assembly drawings, process specifications, technical manuals, written instructions, and test procedures.Proficiency in using torque wrenches and common hand tools such as wrenches and safety wire pliers.Ability to operate specialty tools including crimpers, multimeters, and pin extractors.Strong skills in wire repair, including splicing, soldering, and working with multi-pin and coaxial connectors.Experience testing, troubleshooting, and handling fiber optic conductors.Hands-on experience inspecting and maintaining APG-73 and APG-79 (AESA) radar systems.Experience maintaining tactical warfare systems such as ALE-47 and ALR-67 and F/A-18 weapon systems including FLIR.Experience inspecting and maintaining UHF/VHF communication systems and APX-111 IFF systems.Ability to maintain multipurpose displays, including the Joint Helmet Mounted Cueing System and video recording systems.Basic understanding of 1553 data bus operation and troubleshooting.Experience performing software loading and verification for mission computers and other avionics systems.Comprehensive written and verbal English communication skills.Ability to clearly document maintenance and repair actions, equipment status tags, logs, and parts requests.Capability to work flexible schedules to support customer maintenance requirements.Ability to perform all assigned duties while wearing required safety equipment.Commitment to comply with health and safety regulations, tool control, FOD control, and all training and certification requirements.Active Secret DoD security clearance that can be maintained throughout employment.Additional Skills & Qualifications:U.S. Navy rating as AT or AE, or equivalent aircraft avionics technician experience.Strong preference for candidates who have supported U.S. Navy F-18 squadrons on deployment.Familiarity with Interactive Electronic Technical Manuals (IETMs) and wire illuminator tools.Working knowledge of NAMP 4790 and applicable NAVAIR technical publications.Experience generating written reports for management in support of contractual obligations.Background in repair, troubleshooting, blueprint reading, assembly, aviation, aircraft, mechanical, and electrical systems.Why Work Here?Join a long-term, multi-year program supporting advanced military aviation technology in collaboration with the U.S. Navy. You will work with cutting-edge avionics systems in a stable, non-deployable role, gaining deep technical experience while contributing to an important Foreign Military Sales mission. The environment values professionalism, technical excellence, and adherence to established maintenance standards, offering the opportunity to build specialized expertise and expand your career in high-end defense aviation.Work Environment:This position supports a Foreign Military Sales program located at NAS Joint Reserve Base in New Orleans, Louisiana. All work is performed on-site, and the role is non-deployable. The environment is an operational military aviation facility, with access to F/A-18 E/F aircraft, avionics test equipment, specialty tools, and Interactive Electronic Technical Manuals. You will work within structured maintenance processes governed by NAMP 4790, NAVAIR technical publications, and strict tool control and FOD control procedures. One position supports a first-shift schedule and another supports a dedicated night shift, requiring flexibility to align with aircraft maintenance needs. Safety equipment must be worn as required, and adherence to health and safety regulations is expected at all times.Job Type & Location:This is a Contract position based out of New Orleans, LA.Pay and Benefits:The pay range for this position is $30.00 - $37.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace Type:This is a fully onsite position in New Orleans, LA.Application Deadline:This position is anticipated to close on Sep 25, 2026.