MAINTENANCE WORKER - NAVAL BASE SAN DIEGO - FULL-TIME (35 - 40 HRS)

Maintenance Worker - Naval Base San Diego - Full-Time (35 - 40 Hrs)

Primary Location: United States-California-San Diego

Organization: NAVSTA San Diego Pay Range: $23.99 / $24.99 (DEPENDS ON EXPERIENCE)

Come work for us as a FEDERAL EMPLOYEE and help support our mission by providing customers with quality goods and services at a savings and to support quality of life programs for active-duty military, retirees, reservists and their families.

Job Summary: Performs a variety of maintenance work requiring the use of a variety of trade practices associated with such occupations as air conditioning and refrigeration electrical work plumbing carpentry masonry and painting.

Duties and Responsibilities:

Performs maintenance and repair work involving several trade skills when performing a substantial variety of the following examples of work:

Installs maintains and repairs a variety of refrigeration and air conditioning units and systems such as coolers refrigeration's deep freezers etc. Traces and locates defects and makes visual audible and mechanical checks to determine the extent of repairs needed. Replaces a major portion of the various cooling units such as compressors condensers expansion valves thermostats and drive assembles tightens loose connections makes splices insulates exposed wires in power sources cleans and lubricates moving parts replaces items such as belts fans and fuses. Upon completion of repair tests for proper operation.

Makes electrical repairs on such items as defective wiring controls equipment and fixtures having broken or bare wiring burned out switches and relays loose connections and fittings damaged light fixtures poorly operating thermostats. Rearranges and hooks up items such as outlets switches light fixtures regulators and circuit breakers to installed systems. Locates broken worn damaged or poorly operating wiring fixtures controls and equipment through visual check or use of a limited number of test equipment such as lamps and ammeters. Removes replaces tightens splices solders and or insulates the items being repaired using a variety of hand tools. Measures cuts and bends wires and conduits to specified lengths and angles. Removes cleans replaces and seals defective parts of utility supply and disposal systems such as dirty traps sections of broken tile pipe and tile caulks and seals elbows union joints and faucets cleans and reinstalls joints and fixtures. Hooks up water heaters disposal units' faucets and similar type equipment to installed systems. Uses material specified in work orders or obtains replacement parts by comparison with samples. Measures cuts and bends pipe according to measurements specified in orders or sketches or by comparison with samples. Uses such tools and equipment as tapes rules hacksaws hand and power pipe threaders and cutters packing and caulking irons and pipe wrenches. Plans and lays out work in accordance with drawings sketches blue-prints and own knowledge of construction or needed repairs. Selects lumber materials and supplies. Measures and cuts materials to the required lengths and dimensions. Installs structural and trim items by nailing bolting morticing doweling and gluing. Planes sands and finishes completed work when necessary. Installs sheet roll and shingle roofing insuring proper alignment and overlap. Fabricates and installs frames for windows doors transoms and ventilators shelves counters plywood duct work bulletin boards cabinets bookcases and related features having built in characteristics. Insures that installed components are level and accurately aligned with other parts of the structure. Installs floor and window sashes. Trims mortices drills and prepares items for attachment of hardware. Applies caulking compound or other filler material around door and window casing and at points where tight seal is required. Uses a variety of hand and power shop tools in the accomplishment of assignment. Performs maintenance repair or construction of a variety of structures and surfaces of brick block stone and other related materials. May remove damaged portions of walls partitions walkways or other similar structures in preparation of repairs. Tears out portions of walls for the installation of doors or windows. Spreads mortar sets brick block and stone and finishes mortar joints so that the repaired portion matches the undamaged portion of the structure. Uses a variety of hand tools such as trowels gauge lines plumb bobs air hammers and chisels in the performance of the above duties. Performs maintenance repair or construction of a variety of structures and surfaces of brick block stone and other related materials. May remove damaged portions of walls partitions walkways or other similar structures. Spreads mortar sets brick block and stone finishes mortar joints. Uses a variety of hand tools such as trowels gauge lines plumb bobs air hammers chisels etc. Paints a variety of surfaces interiors and exteriors of buildings shelves counter cabinets and similar items at Navy Exchange sites and locations according to directions ensuring surfaces are fully coated protected and free from drips and runs. Prepares surfaces by methods such as sanding wire brushing scraping spackling and puttying brushes out rolls' shellacs applying prime intermediate and final coats and assuring coating finishes meet surface protection requirements. Uses pre-mixed paints and prepared solvents thinner and stirs coating materials in accomplishment of painting assignments. Checks surfaces after painting to assure there are no skips touches up as needed. Cleans and maintains brushes and painting equipment. May make automotive repairs that can be accomplished by cleaning reinstalling or replacing defective parts of components and systems such as fouled spark plugs leaky wheel cylinders corroded mufflers and worn brake shoes. Determines if parts should be cleaned and reinstalled or replaced with standard parts. As necessary removes and replaces with standard parts such as items as wheel cylinders fuel lines condensers mufflers tailpipes brake linings master cylinders etc. Makes as required settings and adjustments such as setting distributor and voltage regulator points gapping spark plugs setting engine idle and time and taking up on brakes. Uses a variety of common hand tools such as wrenches pliers brake tools ignition tools and screwdrivers in the accomplishment of the above. Locates worn dirty or poorly adjusted parts through visual check or uses a variety of test equipment such as timing lights dwell meters feeler gauges circuit testers and similar type of test equipment. Maintains storeroom areas in a clean and orderly manner. Performs other related duties as assigned.

Physical Effort Is required to stand stoop bend kneel climb and work in tiring and uncomfortable positions. Frequently lifts carries and sets up materials and equipment weighing up to 50 pounds in the performance of duties.

Working Conditions Work is performed inside and outside inside work is usually in building adequately heated lighted and ventilated. Noises from hammers saws and other power tools are frequent. Is exposed to dust dirt fumes and spray when repairing painting and operating power tools etc. Injuries may occur when lifting heavy pieces of lumber or equipment cuts and bruises in using hand tools and equipment more serious injuries in falls from ladders and scaffolds

By choosing to work for the NEXCOM Enterprise, you will enjoy one of the best benefit packages available anywhere: PAID ANNUAL AND SICK LEAVE MEDICAL/DENTAL INSURANCE FLEXIBLE SPPENDING ACCOUNT PENSION PLAN 401k SAVINGS PLAN LIFE INSURANCE PET INSURANCE TAX FREE SHOPPING PRIVILEGES FREE BUS PASSES / FREE PARKING DISCOUNTED TICKETS AT MWR ACCESS TO NAVY LODGE HOTELS WORLDWIDE

This position may work across multiple locations based on business needs. The initial assignment will be at Naval Base San Diego.

General Experience: One year of experience that provided the applicant with knowledge of general maintenance practices involving the upkeep of buildings grounds fixtures equipment etc.

Substitution of Education for Experience: One year of high school education may be substituted for 3 months of general experience up to a High School Diploma or GED for one year of general experience.

Specialized Experience: Three years of general maintenance work in involving variety of trade practices associated with such occupations as air conditioning and refrigeration electrical work plumbing carpentry masonry and painting etc.

Physical Requirements: Standing stooping bending kneeling climbing and work in tiring and uncomfortable positions. Frequently lifts and carries material weighing up to 50 pounds.