PRODUCTION CONTROLLER (AIRCRAFT)

Summary This is a Washington Army National Guard Title 32 Excepted Service Unit Technician position: PRODUCTION CONTROLLER (AIRCRAFT) Location: Army Aviation Support Facility 1 Joint Base Lewis-McChord, Washington 98433 Army National Guard Units Appointment Type: Permanent, excepted service Advertised as: ENLISTED May be used to fill one or more vacancies. Ensure you read this announcement in its entirety, complete all application requirements, and your USA Jobs profile name is accurate Responsibilities A GS-1152-9, PRODUCTION CONTROLLER (AIRCRAFT): Analyzes allocated Flying Hour Program (FHP). Develops plans to optimize execution of flying hours with available resources to satisfy operational and training requirements of the AASF and supported units. Considers Additional Flight Training Periods (AFTP), Multiple and Unit Training Assemblies, Annual Training periods, Mobilization Planning and Training Exercises, and State Emergency Operations in the distribution of aircraft and aircraft hours. Analyzes supported Aviation units' logistics capabilities and training requirements. Develops plansto improve technical proficiency of unit personnel and includes them in the AASF logistics efforts. Develops maintenance plans to maximize AASF services to maintain aircraft readiness. Projects short and long term maintenance requirements. Identifies full-time support and unit personnel capacities and capabilities, annual training schedules, tool and diagnostic test equipment requirements, repair parts, and facilities needed to satisfy operational and training flight requirements. Develops schedules of aircraft and hours to be flown to satisfy the AASF operational aircraft requirements. Recommends priorities for use of aircraft based on operational mission requirements and projected short and long-term maintenance requirements and AASF capabilities. Develops integrated workload schedules and priorities to balance operational and training flying requirements and logistics capabilities. Programs scheduled and unscheduled maintenance requirements, manpower capabilities and capacities, facilities, repair parts, AASF and Unit operations to meet short and long-term maintenance workloads. Maintains a regular flow of work through the shops. Uses Unit Level Logistics System-Aviation (ULLS-A) to facilitate management of AASF logistics operations. Monitors work order status and repair parts requisitions. Compiles data and analyzes information used in aircraft and logistical reports. Processes both formatted and ad hoc ULLS-Areports for supervisor and/or supported units. Serves as contact point between the Logistics Manager/Supervisory Maintenance Test Pilot and work centers. Provides analytical information for continuous management reviews of aircraft readiness and workload capabilities and capacities. Establishes procedures to identify repeat aircraft discrepancies and trends. Monitors trends and provides planning factors for aircraft availability and maintenance schedule progress. Maintains maintenance priorities by equipment type and unit supported. Reports deviations from plans and consequences of deviations on work schedules. Assists in the resolution of problems encountered between scheduled or unscheduled production requirements. Makes recommendations for adjustments to repair priorities necessitated by changes in operational conditions or unscheduled maintenance-supply requirements. Coordinates Maintenance Test Flights (MTF) and Maintenance Operational Checks (MOC) to ensure optimum availability of ready aircraft. Coordinates and publishes maintenance plans and schedules. Maintains displays of aircraft status,flight requirements, and in-process workload. Prepares forecasts of scheduled and depot maintenance requirements. Prioritizes unscheduled maintenance requirements based on AASF work capabilities and capacities. Maintains maintenance flow charts. Monitors component time change and controlled exchange program. Collects data, processes, and submits Aircraft Inventory Status and Flying Time Report (DA Form1352) as well as data and information pertaining to Unit Status Reports (USR). Insures information is accurate, complete, and forwarded. Maintains historical documentation and current AASF logistics capabilities and capacities. Compiles data on work processes for quality and quality improvements. Documents AASF productions cost andjob standards. Interfaces with AASF Logistics, Flight Operations and Training, United States Property and Fiscal Office (USP&FO) and supported units for accomplishing priorities and deadlines established by higher authorities or supported units. Interacts with logistical personnel at the USP&FO concerning critical supply and fiscal programs. Coordinates with support units and other support maintenance activities concerning the delivery, status of repair operations, and/or pick-up of completed work orders. Serves as a point of contact (POC) with NGB, AMCOM, AVCRAD, state, and supported units on matters of AASF logistical services. Attends conferences, briefings, and meetings to represent AASF logistical support and services. Other duties as assigned.(temporary, minor, or incidental tasks) Requirements Conditions of Employment MILITARY REQUIREMENTS: Military Grades: E5-E7 Desired Military Assignments: 15/92/94 series - Applicants need not be assigned to the position or possess the MOS to apply or be considered for selection. Selected applicant must be assigned to a compatible Military position and attain MOS within 1 year of appointment action. - May be required to successfully complete a trial period. - Participation in direct deposit is mandatory. - All soldiers, civilian employees, and contractor employees who drive Army-owned or leased vehicles must complete the Army Avoidance Course (AAC) training when they start working for the Army. Must have a valid Washington state and military driver's license. Must be able to obtain a Government Travel Card (GTC) and be able to attend all schools deemed necessary by the supervisor. - Males born after 31 December 1959 must be registered for Selective Service. - Must maintain membership in the WA Army National Guard for continued employment. - Must be able to obtain, within one year of appointment, and maintain the appropriate SECRET security clearance of the position designated at the State through the use of the Position Designation Tool. - This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. - Position requires ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. - For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. - This is a National Guard dual status technician position which requires military membership. - May require travel in military and/or commercial aircraft to perform temporary duty assignments. - May occasionally be required to work other than normal duty hours; over/comp time may be required. - The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Qualifications GENERAL EXPERIENCE: Experience, education or training which indicates the candidate can reason in quantitative terms, communicate orally and in writing in a clear and concise manner, understanding the terminology and data pertaining to repair operations and process characteristics of the production activity. SPECIALIZED EXPERIENCE: Must have at least 24 months experience, education or training scheduling workflow in more than one area and responsible for coordinating products or materials from support activities. Experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform successfully the duties of the position, and that is typically in or related to the position to be filled. Experience in performing or supervising journeyman level work in a production facility. Experience preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes. Experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc. -or- 1-year equivalent to at least next lower grade level ***Note: To qualify under the one-year Specialized Experience (SE) provision (when stated in the SE section), you must provide either: Two SF-50s (or equivalent) showing you were in the same occupational series at the next lower grade for at least one full year. The two SF-50s must span that full one-year period, from the older SF-50 to the newer SF-50 and reflect employment with the same federal agency. -or- One SF-50 (or equivalent) if your resume shows at least one year of continuous employment in the position reflected on the SF-50 (or equivalent). Education Education Requirements: High School Diploma or GED Degree Required: Not Applicable. Degree Required to qualify with Education Only (No Specialized Experience): Not Applicable. You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position. If you are selected for a vacancy that requires a specific degree and/or coursework you will be required to provide official transcripts prior to appointment. Substitution of Education for Specialized Experience: Not Applicable. Additional Information - Certain incentive(s) may be available pending funding and approval but are not guaranteed. - If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( - Military Technicians are ineligible for enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position will terminate these incentives. - Military Technicians in the excepted service will wear the appropriate uniform while performing as a Technician. - Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709 (f). - May be required to successfully complete a trial period. REEMPLOYED ANNUITANT: In accordance with Section 9902(g) of Title 5, United States Code (U.S.C.), annuitants reemployed in the DoD will receive full annuity and salary upon appointment. They will not be eligible for retirement contributions, participation in the Thrift Savings Plan, or a supplemental or redetermined annuity for the reemployment period. Discontinued service retirement annuitants (i.e., retired in accordance with Section 8336(d)(1) or Section8414(b)(1)(A) of Title 5, U.S.C.) appointed to the DoD may elect to be subject to retirement provisions of the new appointment as appropriate. EQUAL OPPORTUNITY: The WA National Guard is an equal opportunity employer and does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service or other non-merit factor. If you are unable to upload a document online please send the document via email to our WA HRO Distro Box.