Meter Calibration Technician
Tanknology, Inc.
We are seeking an energetic, mechanically minded, problem-solving individual to start immediately. This position offers a rare opportunity to enter the stable, long-term employment fuel industry. Ambitious, hard-working technicians. The Meter Calibration Technician will perform all non-electrical tasks necessary to conduct retail gasoline meter calibration on regulated fueling systems at area gas stations, including but not limited to driving a company vehicle, sending and receiving work schedules & reports electronically, wearing appropriate PPE, obtaining regulatory licensing including manufacturer certifications, attending professional equipment training, properly maintaining company equipment and vehicle, and attending required meetings and teleconferences. Technician may also perform tasks including: Dispenser repairs including hanging hardware and nozzle repair/replacement, fuel filter changes, replacement of caps, adapters, and gaskets, pumping of fluid from compartments, and investigation of alarms. MINIMUM REQUIREMENTS: 18 years of age, High School diploma or GED, with trade, college or other certification or degree preferred. Knowledge of computers & smart phones with apps. Clean driving record. Drug screening is part of hiring process and required by DOT for fleet vehicle operators. PHYSICAL REQUIREMENTS: Carry tools and test equipment up to 50 lbs. Step up & down, kneel, squat or crouch while working on equipment at grade. Access and maneuver inside small/confined spaces. Handling, grasping of hand tools or squeezing of nozzles. Occasionally pull and slide manway lids up to 150 lbs. Push a wheeled fuel-cart up to 250 lbs. Push or pull pipe wrenches up to 36\" long. WORKING CONDITIONS: Outdoors in all weather conditions. Work hours typically occur between 5am- 3pm, Monday-Friday, with some weekends and overnights. After training, the technician will be assigned a work vehicle. If issued a Commercial Motor Vehicle (CMV), a CDL and periodic DOT drug screening and physical exams are required (paid for by the company). TRAINING: Company provides Safety training & on-the-job training of all position duties. All certifications, testing and training are paid for by the company. LOCATION/TRAVEL: This position requires daily travel to gas stations throughout northern California. Local area of operation is the greater Sacramento area. Full area of operation is North/Central California, Western Nevada, with periodic travel to Southern Oregon or Southern California. Ideal home location for technician is within 10 miles of Sacramento city limits, such as Elk Grove, Rancho Cordova or Rio Linda. Travel greater than 90 miles or 1.5 hours is eligible for an overnight stay and per diem paid by the company. The typical workweek is Monday through Friday, with varying start (i.e. 4am to 9am) and end (i.e. 2pm to 6pm) times. Periodic weekend and evening/overnight hours may occur. Week-long trips away from home may be scheduled one week each month throughout the year Work Location: On the road #J-18808-Ljbffr Tanknology, Inc.
- Tanknology, Inc. is seeking an energetic, mechanically minded Meter Calibration Technician to calibrate retail gasoline meters at area gas stations across northern California. This on-the-road role requires driving a company vehicle, maintaining PPE, and earning operator...SuggestedDaily paidNight shift
$28 - $32 per hour
...clinical pipeline and supporting future commercial availability of our life-saving therapies. Summary of Position: The Calibration Technician is responsible for inspecting, testing, calibrating, and maintaining measurement and test equipment to ensure accuracy and...SuggestedFull timeWork at officeLocal areaRemote work$25 - $33 per hour
Job Description Job Title: Temperature/ Pyrometry Calibration Technician Location: Cypress, CA (Servicing Southern California) Schedule: Full-time, Monday-Friday Pay: $25-33/hour Company Overview: Micro Quality Calibration (MQC), founded in 1978, is a leading A2LA ISO/...SuggestedFull timeMonday to Friday- About the Role Asplundh Electrical Testing is seeking a Description About the Role Asplundh Electrical Testing is seeking a Calibration Technician with strong metrology expertise to join our growing team in Foxborough, MA. This role is ideal for a technically skilled...Suggested
$28 per hour
...quality-focused teammates to provide top tier service to our customers. Protech Automotive Solutions is hiring for a Protech Calibration Technician Apprentice. In this paid apprenticeship you will be provided mentorship and training to learn how to perform a wide...SuggestedHourly payWeekly payApprenticeshipImmediate start- Protech Automotive Solutions is seeking a Calibration Technician Apprentice to join our team. This paid apprenticeship provides mentorship and training to perform ADS calibrations by following OE specifications in a production shop. You will gain hands-on experience across...Apprenticeship
- Position Title: Calibration Technician Function: Metrology Department Accountable To: Quality Manager Work Type: Work Days: Monday - Friday Shift: 1st (Day) Hours/Week: 40 Salaried Offered: Unspecified Position Overview: We are looking for an experienced Calibration Technician...Work experience placementWork at officeMonday to FridayShift work
- Protech Automotive Solutions is hiring for a Protech Calibration Technician Apprentice. This paid apprenticeship provides mentorship and training to learn Advanced Driver Assistance System calibrations by following OE specs and repair standards. You will gain hands-on...Apprenticeship
- ...Job Description Job Description About the Role: A Structured Cabling Technician is responsible for the installation, termination, testing, and troubleshooting of low voltage cabling systems in commercial and data center environments. This role supports mission...Shift workWeekend work
- ...established industry player is seeking a dedicated team member to join their Hardware Manufacturing Team. This role focuses on aligning, calibrating, and executing complex test methods to meet operational plans and customer demands. The ideal candidate will thrive in a...
- Micro Quality Calibration Inc. is seeking a Pyrometry Calibration Technician to perform instrument calibration, temperature uniformity surveys (TUS), and system accuracy tests (SAT) at customer sites in Southern California. The role requires AMS2750 expertise, strong customer...
$20 - $25 per hour
...manufacturing procedures.Uses hand tools, power tools, and other manufacturing assembly line equipment to assemble units.Tests and calibrates parts and mechanisms to ensure all components meet tolerances, product specifications, and quality standards.May repair or refit...Contract work- ...TITLE: Instrumentation & Electrical Technician DEPARTMENT: Field Operation - SJV REPORTS TO: Operations Supervisor BASIC PURPOSE OF POSITION... ..., pneumatic). Order and maintain an adequate parts inventory. Calibrate and maintain safety devices pertaining to oil and gas...Work at officeLocal area
- Aviation safety inspectors work to ensure the safety of aircrafts, including its parts, processes, and its aircraft operators. They certify operators and mechanics, issue certification, and perform surveillance. They ensure all practices happen within the established rules...
$19.02 - $22.69 per hour
...the Department. Minimum Requirements You will find the Minimum Requirements in the Class Specification. AGRICULTURAL TECHNICIAN II (SEASONAL) AGRICULTURAL AIDE (SEASONAL) AGRICULTURAL TECHNICIAN I (SEASONAL) Additional Documents Job...Permanent employmentSeasonal workWork at officeRemote workWeekend work- Siemens is seeking an Electrical Sub-Assembler I in the United States, Sacramento area, to build electrical control racks and wiring harnesses for rail vehicles. You will read blueprints, follow BOMs, terminate wires, and crimp to spec while maintaining quality, safety,...
$90 - $100 per hour
...$100.00/hr Direct message the job poster from CDM Technology Calibration Engineer — Carlsbad, California | R+D | Full-time Reporting to... ...success criteria for feature calibrations Work with test technicians and other engineers to ensure appropriate instrumentation is...Full timeContract workRemote work- ## PMEL Metrology Technician I (AFRC)Applylocations: AFRC01 - CA - Edwards Air Force Basetime type: Full timeposted on: Posted Todayjob... ...in Test, Maintenance, and Diagnostic Equipment (TMDE) calibration and repair. Performs entry-level calibration and inspection of...Contract workLocal area
$20.54 - $23.36 per hour
...may be used to fill subsequent vacancies. Under direction of the Station Manager or Shift Supervisor, the Agricultural Technician III (Ag Tech III) independently performs the most difficult and varied regulatory inspections on vehicles and commodities to prevent...Seasonal workWork at officeRemote workShift workNight shiftRotating shiftAfternoon shift$20.54 - $23.36 per hour
...the Department. Minimum Requirements You will find the Minimum Requirements in the Class Specification. AGRICULTURAL TECHNICIAN III (SEASONAL) AGRICULTURAL TECHNICIAN I (SEASONAL) AGRICULTURAL TECHNICIAN II (SEASONAL) Additional Documents...Seasonal workWork at officeLocal areaImmediate startRemote workWeekend work- University of California, Davis Health in Sacramento, CA is seeking a Sterile Processing Technician II to focus on cleaning, disinfecting, inspecting, sterilizing and assembling surgical instruments and equipment for the perioperative services. The role supports 40+ operating...
- University of California- Davis Health in Sacramento's Perioperative Services seeks a Sterile Processing Technician II to clean, disinfect, inspect, sterilize and assemble surgical instruments and equipment for patient care. This on-site role emphasizes accuracy, adherence...
$21 per hour
Pioneering in America, from the first mile to the last. This is what drives us. Siemens offers a variety of health and wellness benefits to our employees. Details regarding our benefits can be found here: Position Overview: As an Electrical Sub-Assembler I, you will support...Shift work- IT Minds LLC is seeking a LabWare LIMS Instrument Integration Specialist to assist with a LabWare 8 upgrade project in California. The ideal candidate will have hands-on experience with integrating laboratory instruments with LabWare LIMS, ensuring reliable data flow and...Remote job
- Yulista Holding, LLC is hiring a PMEL Metrology Technician I in California. The role involves calibration and maintenance of diverse measurement instruments, managing records, and ensuring compliance with safety and industry standards. The ideal candidate should possess...
- ...LOCATION: Nivagen Pharmaceuticals Inc., Sacramento, CA 3900 Duckhorn Dr, Sacramento, CA 95834 JOB SUMMARY: The Metrology Technician II leads calibration, troubleshooting, and maintenance activities for production, laboratory, and testing instruments. This role is...
- UCLA Health is seeking a Loaner Tray Coordinator within the West Valley Campus operating room to manage receipt, inventory, processing, and return of vendor loaner, consigned, and owned instrument and implant trays. You will support instrument processing and customer service...
- Televic Group is looking for an Electromechanical Assembler in Sacramento, California. The role involves supporting the assembly of advanced onboard communication and rail technology systems, with a focus on precision and quality. You will work with delicate components ...
- ...Required Qualifications High school diploma or GED. 2+ years of assembly, manufacturing, electronics assembly, cable assembly, or technician experience. Experience using hand tools and precision assembly tools. Strong manual dexterity and attention to detail....
- ...perform other duties as required. Electrical Instrumentation Technician II is the journey level class in this series. Incumbents work... ...materials, methods, and equipment used in the inspection, testing, calibration, maintenance, and repair of process instrumentation and...Flexible hoursNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Meter Calibration Technician. Be the first to apply!
- metrology technician Sacramento, CA
- electrical metering technician Sacramento, CA
- meter technician Sacramento, CA
- calibration engineer Sacramento, CA
- instrument technician Sacramento, CA
- calibration technician Sacramento, CA
- metrology technician
- electrical metering technician
- meter technician
- journeyman meter technician


