Lead Aircraft MX Technician - Third Shift - Hangar 8
Kalitta Air, LLC
Job Description
Job Description
Job Title : Lead Aircraft Maintenance Technician - Third Shift
Department: Maintenance (Hangar 8)
Reports To : Aircraft Maintenance Supervisor
POSITION PURPOSE:
The Lead Aircraft Maintenance Technician is responsible for overseeing various maintenance functions on company aircraft performed by Aircraft Maintenance Technicians, Mechanics, and Apprentices in accordance with all company policies and procedures as well as all federal aviation regulations.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Oversee and assist approved work by their Supervisors within the scheduled shift
- Ensure completeness of all assigned work documents and records
- Oversee on-the-job training during work shift to ensure proper qualification standards are met and maintained.
- Coordinate all activities with Maintenance Supervisors
- Research all pertinent information and material for work scheduled on aircraft.
- Oversee and Assist in the clean-up of the maintenance work area.
- Ensure that all maintenance areas meet good “housekeeping” standards.
- Always maintain positive tool control accountability & immediately report lost and/or found tools to management.
- Perform data entries as required.
- Perform other duties as assigned.
- Comply with and implement the necessary procedures in the MEL/CDL/NEF Program
- Monitor the proper completion of aircraft records (e.g., logbook pages, work cards, non-routines, Engineering documents [EOs, EAs, etc.], and other related documents)
- Ensure accuracy and completeness of all assigned work documents and records.
- Maintain familiarization with the training requirements necessary as defined in the AMTM and ensure training is current prior to performing the functions and tasks of this position
- Always follow (never deviate from) approved published procedures unless proper deviation is Authorized
- Must be able to pass a 10 Year Background check, and any location specific requirements.
- Must be able to obtain an Airport SIDA Badge and United States Custom Seal if required.
EDUCATION and/or EXPERIENCE:
- FAA-certificated mechanic with Airframe, Powerplant or both ratings (must be provided upon hire and or request)
- Recommended, two (2) years of experience performing maintenance in the following areas on Boeing 747-400 or 777F / 777-300 or similar type aircraft.
LANGUAGE SKILLS
Must have the ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give and receive verbal and written direction to team members.
QUALIFICATIONS:
- FAA-certificated mechanic with Airframe, Powerplant or both ratings (may be reviewed based on Location and position )
- Recommended but not required, two (2) years of experience performing maintenance in the following areas on Boeing 747-400 or 777F / 777-300 or similar type aircraft:
- maintenance checks
- engine changes
- gear changes
- structural repairs
- flight control rigging
- component maintenance on Boeing 747-400 or 777F / 777-300 or similar type aircraft or successful Completion of accredited A&P mechanic training course
- When requested by management if applicable to your location, must obtain Engine Run / Taxi
- Must demonstrate behavior that portrays the company core values of Safety, Respect, Trust, Collaboration, Value, and Passion while communicating with personnel and acting on behalf of the company.
PHYSICAL DEMANDS
Position requires extremely strenuous physical work involving objects in excess of 100 lbs.
occasionally and in excess of 50 lbs. frequently. The Company may make reasonable accommodations to enable individuals with disabilities to perform the essential functions.
WORK ENVIRONMENT:
Work may be performed in an Office, Hangar Floor or shop environment as well as in an Open Air Line Maintenance environment exposed to the elements.
ACCOMMODATIONS:
If you need reasonable accommodation for the online application process due to a disability, please call View phone number on ziprecruiter.com. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned.
**if you cannot apply online, other accommodations can be made**
**Must be authorized to work in the United States**
- ...Job Description Job Description JOB DESCRIPTION Job Title : Lead Aircraft MX Technician - 2nd Shift - Weekends Department: Hangar 7 Reports To : Night Shift Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are...SuggestedNight shiftWeekend workAfternoon shift
- ...Job Description Job Description JOB DESCRIPTION Job Title : Lead Aircraft Maintenance Technician - Weekends, First Shift Department: OSC Hangar 10 Reports To : Aircraft Maintenance Supervisor Internal applicants must submit an Employee Internal Application...Shift workImmediate startWeekend workDay shift
- ...Job Description Job Title : Power Plant Line Maintenance Lead - (2nd shift) Department: Power Plant Line Maintenance Building 3 (16... ...mechanics to perform day-to-day maintenance on various types of aircraft engines. ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties...SuggestedWeekend workAfternoon shift
- ...Michigan. Job Duties & Requirements: A&P’s to perform hangar maintenance on mostly Boeing Commercial Aircraft. Kalitta’s own fleet consists of 747s, 767s and 777... ...be flexible about potential work schedule, and the shifts and schedule you are assigned to work You must be...Shift workFlexible hours
- ...STS Technical Services is hiring Aircraft Avionics Technicians to support aircraft maintenance operations in Oscoda, Michigan. This role is ideal... ...balance, and carry up to 50 pounds Ability to work in enclosed hangars and outdoor weather conditions Comfortable working in...Suggested
$25 - $50 per hour
...Role Overview TSA is accepting applications for Lead and Supervisory Transportation Security Officers at airports in Oscoda. These... ...50.00 Annual Compensation : $52,000 - $80,000+ Schedule : Shift-based (nights, weekends, holidays) Perks and Benefits Paid...Shift workNight shiftWeekend work- ...STS Technical Services is hiring Aircraft Structures Mechanics to support aircraft maintenance... ...50 pounds Ability to work in enclosed hangars and outdoor weather conditions... ...a Top 100 Staffing Firm partnered with leading organizations across aviation, aerospace...
- ...DESCRIPTION Job Title: Line MX Mechanic Department:... ...Reports To: Line MX Lead ESSENTIAL DUTIES AND RESPONSIBILITIES... ...1. Troubleshoot and repair aircraft, powerplants, components, and... ...company's attention. 8. Keep a neat and clean work area...
$15 per hour
...Tawas! Trillium Staffing is taking applications and interviewing for immediate 1st, 2nd, and 3rd shift production worker positions in East Tawas, Michigan. The shifts are 8, 10, and 12-hour shifts with possible overtime. First shift schedules are 7am-3:30pm, 5am-3:30...Shift workHourly payImmediate startNight shiftDay shiftAfternoon shift- ...Description Job Description JOB DESCRIPTION Job Title : OJT Lead Department: Maintenance Training Reports To : OJT... ...ENVIRONMENT: The employee will perform duties in an office, hangar and shop environments. ACCOMMODATIONS: If you need reasonable...TraineeshipWork at office
- ...Reports To : Structures Engineering Manager Shift: Full Time - 1st Shift ESSENTIAL... ...maintenance, repair, and modification of fleet aircraft and appliances. 2. Obtain regulatory... ..., and other Kalitta Air personnel. 8. Interface with manufacturers, maintenance...Shift workFull timeDay shift
$15 per hour
...hour for full time hours $17.50 per hour for part time hours Shift: All Shifts – Fulltime and part time 1st Shift: 6:30am-3:00pm... ...verbal and written communication skills. Are able to stand for 8 hours a day and work safely in a manufacturing environment. Value...Shift workHourly payFull timeTemporary workPart timeLocal areaAll shiftsNight shiftDay shiftAfternoon shift- ...STS Technical Services is hiring Aircraft Engine Mechanics in Oscoda, Michigan. This role supports a 14 CFR Part 145 Repair Station specialising... ...overhaul and maintenance activities under the direction of Leads, Maintenance Control, or Operations leadership. Key...Work at office
- ...Title : Data Processor Department: OSC Hangar Mx Reports To : Data Processor... ...ability required. Must be willing to work any shift as required. EDUCATION and/or... ...computer and communication skills. Previous Aircraft or Data processing experience a plus....Shift workWork at officeDay shift
- ...company? Apply now! Location: 5463 N. Huron Rd - Oscoda, Michigan 48750 Position Summary: This role is responsible to lead the day-to-day activities of the department operations in a retail store, ensuring the associates are trained, the department is...Immediate startVisa sponsorshipWork visa
- ...Job Description Job Description Job Title : ACC Lead Department: AMOS Competency Center Reports To : Ashley Phibbs- Technical Project Manager Work Schedule : Full Time Summary: The ACC Lead will assist with the creation and up-keep of SOPs, stay...Full timeWork at office
- Postal workers sort, process, and deliver mail and packages for homes and businesses. They operate sorting machines, manage routes, collect outgoing mail, and provide customer service at postal counters. The role requires accuracy, reliability, and stamina, often involving...Early shift
- JOB DESCRIPTION Job Title: Tool Room Clerk Department: OSC Hangar Maintenance Reports To: OSC Tooling Administrator ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Accomplish incoming and outgoing tooling exchanges...Day shift
$19 - $20 per hour
...direct patient care staff including RNs, LVN/LPNs and Patient Care Technicians. As a member of the End Stage Kidney Disease (ESKD) health... ...candidates to float to area sites within 50 miles of the main site. Shift details: Shifts will be discussed in detail during the...Shift workContract workAfternoon shiftEarly shift$14 per hour
...Assembly Worker Now accepting applications for full time and part time Assembly Workers in Oscoda, MI! The positions are for 2nd shift and 3rd shift, which are 2:30pm-11:00pm, and 10:30pm - 7:00am Monday-Friday for full time $14.00/hr, and Monday-Thursday for part...Full timePart timeMonday to FridayNight shiftAfternoon shift- ...predictable attendance. Work scheduled shifts and have the ability to work varied hours,... ...generally are no less than 4 hours and may exceed 8 hours Promote a safe and productive... ...is why we empower our Team Members to lead balanced lives through our benefits and...Shift workFull timePart timeFlexible hoursNight shiftWeekend work
- ...openings for a Production Associate. The ideal candidate will be based in the Oscoda area and would be available at one of the following shifts listed below. This is a full-time, hourly position with eligibility for a safety bonus. Current Shifts & Openings TIP‑TOP Screw 2...Shift workHourly payFull timeLocal areaFlexible hoursWeekend workAfternoon shift
- ...DESCRIPTION Job Title : OSC Line Maintenance Structures Technician Department : OSC Line Maintenance Reports To... ...7. Keep a neat and clean work area at all times. 8. Any other duties as assigned by the Lead, Supervisor or Manager. QUALIFICATIONS : To...Day shiftAfternoon shift
$19 - $20.5 per hour
...Ability to lift up to 30 pounds regularly and perform physical tasks such as standing, lifting, and moving materials throughout the shift. Reliability and strong attendance, with the ability to work 10-hour shifts and additional overtime as needed. Willingness to...Shift workWeekly payContract workTemporary workLocal areaImmediate startDay shiftAfternoon shift- ...Maintenance Technician Responsible for maintenance of injection molding machines, facility equipment, building maintenance and repairs. This will be an off-shift position and will train on first shift. High School Diploma required. Mechanical or Electrical degree...Shift workFlexible hoursDay shift
- ...maintain operational standards and procedures. This position operates under the direction of the General Manager, Assistant Managers, and Shift Coordinators. This position has direct interaction with guests and members of the field operations team. SUMMARY OF ESSENTIAL...Shift workImmediate startWeekend workAfternoon shift
- ...Join Inframark: Leading the Way in Water Management Inframark's Operations and Maintenance... .../ PURPOSE The Maintenance Technician I is responsible for inspecting,... ...essential job duties. Available for all shifts including weekends, holidays, evenings,...All shiftsAfternoon shift
- ...Shift Supervisor At KFC, we feed the world. But we do more than fill people up. We fulfill their life. Our meals matter, and when we serve them with southern hospitality, we make our customer's day. So our jobs are more than a paycheck - they're about being independent...Shift workSecond jobFlexible hours
$43.75 per hour
...a flexible and rewarding dental career! Apply now. Benefits Jobley Bonus: $140 (awarded to candidates hired through Jobley) Shift & Schedule 2 days a week About the Practice Name: OSCODA Dental and Oral Wellness Location: 4680 E F41, Oscoda, MI 48750...Shift workFull timePart timeFlexible hours2 days per week$23 - $45 per hour
...Details Openings : Oscoda and Nationwide Starting Pay : $23.00 - $45.00 Annual Compensation : $48,000 - $70,000+ Schedule : Shift-based Perks and Benefits Paid leave and holidays Health insurance coverage Retirement plan with TSP matching Overtime...Shift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Lead Aircraft MX Technician - Third Shift - Hangar 8. Be the first to apply!




