Welder
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required.
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- Ensure all Hanwha Philly Shipyard safety procedures, rules, and regulations are followed and met
- Knowledge and efficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by HPSI and Classification Society
- Welding process includes:
- FCAW - Flux Cored Arc Welding
- SMAW - Shielded Metal Arc Welding
- SAW - Submerged Arc Welding
- Automated Welding Process (use of tractors)
- Stainless Steel Fillet Welding
- Padding and preparing weld joints per WPS
- Carbon Arc Gouging
- Note: Not inclusive, shall be determined by vessel specification and classification rules
- Knowledge, understanding, and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard
- Knowledge and ability on how to use all welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation
- Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification
- Welder shall perform internal quality checks of their work performance to ensure quality standards are achieved. Be able to do their quality checks of their welds daily
- Welder must maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and Classification Society
- May be trained and required to weld using automated welding systems
- Perform other related duties as required and assigned
- Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards
- Flexible cooperation with team members
- Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather)
- Welder must be able to work in a team environment
- Workmanship assembly - Multi-position 4.5mm (+1.0 mm/-0.5mm) fillet welds
- Grind a weld without leaving scarred surface
- Requires Bend Test of 400mm long Vertical and Horizontal Groove
- Requires Bend Tests of 400mm long test coupons in accordance with Classification Society Rules
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- High School Diploma or GED
- 3 to 5 years' work experience in businesses with heavy industrial or steel fabrication preferred
- 1+ years' work experience in heavy industrial with either an Associate Degree in Welding Technology or completion of the welding training program with PSI curriculum
- Welding robotics a plus
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Welder in Moorestown, NJ vacancy
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- Job Purpose: Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times. Job Summary...SuggestedHourly pay
$20 - $28 per hour
Description: Job Purpose:Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.Job Summary...SuggestedHourly payFull timeRemote work- ...Job Description Job Description WELDER-TIG FAB & CLADDING COMPANY PROFILE: Fluidyne Corp is a well respected prime contractor that manufactures custom valves for the Navy. The majority of our business supports the Navy’s critical Nuclear Propulsion and Level...SuggestedFor contractorsWeekend workAfternoon shift
- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...Shift work
- ...welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification...Full timeWork experience placementFlexible hours
- ...Thompson First Group is seeking Welders for contract to hire positions with a local client in Cinnaminson, NJ. Candidates with experience welding in an industrial setting are encouraged to apply. Responsibilities Accident prevention – actively identify, correct and/or...Contract workLocal area
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$26 per hour
...Pipe Welders Labor One is currently hiring pipe welders in San Diego, CA at a shipyard. Pay rate is up to $26 + $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment...Daily paidCurrently hiringShift work$30 per hour
Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...Shift workWeekend workDay shiftAfternoon shift- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...Work at officeLocal areaFlexible hours
- ...Welder/Pipefitter Journeyman Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive...Work at officeMonday to FridayShift workWeekend work
$30 - $32 per hour
...Job Description Job Description WELDER- WEEKLY PAY- START ASAP Location: Baltimore, MD Pay: $30-$32/hour + $50 daily per diem + daily lodging Hours: Monday-Saturday This role supports maintenance and repair activities at a coal-fired utility plant in Baltimore...Weekly payDaily paidContract workTemporary workImmediate startShift work- ...Structural Welder Labor One is currently hiring structural welders in Pascagoula, MS at a shipyard. Job requirements include three years of experience in shipyard, comprehension of written and verbal instructions in English, the ability to hear warning signals, read...Currently hiringShift work
$800 per month
Job Description Job Description Grand Opening - Eligible Automotive Tire Technician receive weekly bonuses up to $800 Mavis Tires & Brakes at Discount Prices, a leader in the tire and automotive repair service field, is pleased to join the Stratford, NJ area. We...Hourly payWeekly payImmediate start$18 - $21 per hour
Job Description Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies...Full timeRelocation packageShift work$40 per hour
...Description Tradesmen International is immediately hiring experienced Welders for projects located in the Philadelphia, PA area . This is a first shift opportunity, and the pay rate is up to $40/hour based on experience and skill level. If you are a Welder and...Work at officeImmediate startDay shift$50k - $100k
...Assembler III / Certified Welder Assembler III / Certified Welder is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the...Hourly payShift work- Job Title Job Description Help You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will be...
- ...Welder Position at Hanwha Philly Shipyard Essential Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required....Full timeWork experience placementFlexible hours
- ...Welding Position You will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...
$30 - $43 per hour
...The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic...Hourly payImmediate startFlexible hoursShift workNight shiftWeekend workDay shiftAfternoon shift- ...components or to fill holes, indentations, or seams of fabricated metal products. Qualifications Demonstrated experience as a professional welder. Ability to strictly adhere to all safety standards. Demonstrated ability to accept and follow instructions from others....Work at office
- Responsible for the manufacture of hydraulic machinery from drawings. Must be capable of performing the following duties: Read hydraulic and electrical circuit and general arrangement drawings. Understand a bill of material and its relationship to a drawing. ...
$30 per hour
...Job Description CTR Group is seeking experienced Structural Welders for the North-Eastern United States area for full-time positions. Travelers Welcome! Recently separated or retired Navy Hull Technicians encouraged to apply! 1st Shift Position: PAY RATE $30 per...Hourly payDaily paidFull timeWork experience placementDay shift- ...Job Full Description We are seeking skilled Welders to join Express! Responsibilities: Perform MIG, TIG, or Stick welding Read and interpret blueprints and technical drawings Inspect and ensure quality welds meet industry standards...
- ...Company Description: Welder: Trusted distributor and installer of refractory materials since 1937, known for its over 20 years of expertise in boiler repairs with an R Stamp certification. Based in Greater Philadelphia, our Trusted distributor and installer of refractory...Full time
$23.74 per hour
...Welder Hiring Event – Same-Day Interviews & Hiring Decisions Are you a skilled Welder looking for a great career with competitive pay, outstanding benefits, and opportunities for growth? Wastequip wants to meet you! Join us for our upcoming hiring event and discover...Hourly payTemporary workImmediate startFlexible hours$25 - $30 per hour
Job Description Job Description Experienced Handyman Needed – Temporary Position Location: Palmyra / Cinnaminson, South Jersey Pay: $25–$30 per hour, based on experience Job Type: Temporary / Project-Based Potential for Additional Work Benefits / ...Hourly payPermanent employmentFull timeTemporary workImmediate startFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!



