Welder
Department of the Navy - Agency Wide
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Welder in Bryn Mawr, PA vacancy
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleCasual workWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...SuggestedShift work
$26 per hour
...Pipe Welders Labor One is currently hiring pipe welders in San Diego, CA at a shipyard. Pay rate is up to $26 + $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment...SuggestedDaily paidCurrently hiringShift work$35 - $42 per hour
...Job Description Job Description Looking for local candidates to the Philly region RSC MArine is looking for pipe welders for repair work on marine and industrial projects. Great company plenty of work and overtime. 6G Stainless Pipe Welding Nickel Aluminum Bronze...Local area$40 per hour
...Job Description Job Description Pipe Welders needed for multiple industrial piping projects in the Riverside, NJ area. You will be working with carbon sch 40 and sch 80 utility piping - tig welding the root with a mig cap, and stainless steel sch 10 food grade process...Daily paidPermanent employmentTemporary workFor contractorsWork experience placementImmediate start- ...Structural Steel Welder/Fitter Harleysville, PA Pay: $21.00 - $25.00 per hour Shift: 1st Shift Schedule: Full-Time Job Responsibilities: Fit and assemble stainless steel components and fabricated products Weld stainless steel materials according to specifications...Hourly payFull timeShift workDay shift
$21 - $25 per hour
...Structural Steel Welder/Fitter Harleysville, PA Pay: $21.00 - $25.00 per hour Shift: 1st Shift Schedule: Full-Time Structural Steel Welder/Fitter Job Responsibilities Fit and assemble stainless steel components and fabricated products Weld stainless...Hourly payPermanent employmentFull timeTemporary workWork at officeLocal areaShift workDay shift$30 per hour
Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300...Shift workWeekend workDay shiftAfternoon shift- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...Work at officeLocal areaFlexible hours
- ...Welder/Pipefitter Journeyman Founded and family-owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy...Work at officeMonday to FridayShift workWeekend work
- ...Structural Welder Labor One is currently hiring structural welders in Pascagoula, MS at a shipyard. Job requirements include three years of experience in shipyard, comprehension of written and verbal instructions in English, the ability to hear warning signals, read...Currently hiringShift work
$25 - $40 per hour
...about us: Join a growing manufacturer that values craftsmanship, quality, and precision. We are looking for an experienced TIG Welder with strong aluminum welding skills to join our team. If you take pride in producing clean, high quality welds and enjoy working in...Local areaAfternoon shift- ...TIG Welder Pay Rate: Negotiable based on experience and weld test Shift: Days Description: ~ We are seeking a skilled TIG (GTAW) Welder to produce and repair precision, thin-gauge stainless steel and titanium components used in demanding service environments...Temporary workWork experience placementShift workDay shift
- ...Welder / Fitter At R-V Industries, our work is much more than designing and building world-class industrial process equipment. Not only are we impacting everyday life in the world we serve, but we are providing a quality of life to our employees and their families...
- Job Duties: Prepares surfaces to be welded, fits parts, welds piping and manifolds Cut, grind, drill holes and weld steel to blueprint specifications May use plasma cutter to cut I-beams and steel plates Tack welds scrap metal to outline to provide jig...
$18 - $19 per hour
Job description: MIG Welder - Full-Time | Long-Term Opportunity Pay Rate: $18-$19.00/hour Schedule: Monday-Friday, 6:30 AM - 3:00 PM We are currently seeking an experienced MIG Welder to join our team. This is a full-time, long-term opportunity with a stable schedule and...Hourly payFull timeMonday to Friday- ...Job Description: Welder Division: NCC Automated Systems Location: Souderton, PA Department: Fabrication Reports To: Fabrication Team Leader / Manufacturing Manager Why is this Position Important? Welding and fabrication are an integral part of NCC...
$18 - $27 per hour
...Now hiring for a Orbital Welder - Direct Hire! Location: Malvern, PA Pay Rate: $18.00 - $27.00 per hour Schedule: 7:00 AM - 3:30 PM Weld Like a Rock Star. Welders Needed. Looking for Orbital Welder jobs in Malvern where your welding skills...Hourly payTemporary workFor contractorsApprenticeshipLocal areaImmediate start$95k - $125k
HYBRID or Remote - Mid-Level Mechanical Engineer – Grow Your Career on Mission-Critical Projects This Jobot Job is hosted by: Kelsey Bannon Are you a fit? Easy Apply now by clicking the Apply button and sending us your resume. Salary: $95,000 - $125,000 per year...Local areaRemote work$18 - $24 per hour
...Job Title: Aluminum/Steel Welder Location: Chester,PA Salary/Rate: $18-24 Responsibilities: - Read and interpret blueprints, drawings, and specifications to determine the appropriate welding techniques and materials - Perform welding and fitting tasks using...Hourly payFull timeContract work$28 per hour
...Job Description Now Hiring: Flux Core Welders Location: Philadelphia, PA Long Term Project Wages: $28.00 Per Hour $150.00 Per Diem $400.00 Travel Pay 2 Weeks of lodging paid by Construction Services $1,000.00 Bonus...Hourly payDaily paidWork experience placementImmediate startShift work- Job Title Job Description Duties You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will ...
- ...related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification...Full timeWork experience placementFlexible hours
- ...manufacturers. In this position you will be responsible for, but not limited to repair, fabrication/assemble on industrial equipment using welders, cutters, shapers, and measuring tools. The position is for 1st shift 8am – 4pm Duties & Responsibilities: Read and...Full timeDay shift
$30 per hour
...Job Description CTR Group is seeking experienced Structural Welders for the North-Eastern United States area for full-time positions. Travelers Welcome! Recently separated or retired Navy Hull Technicians encouraged to apply! 1st Shift Position: PAY RATE $30 per...Hourly payDaily paidFull timeWork experience placementDay shift- ...Heritage Fence Company is looking for an Welder Fabricator to join our growing team! This role is a great opportunity for a detail-orientated individual with experience in the construction industry . We are celebrating 53 years in the Fencing industry and are focused...Hourly payFull timeTemporary workWork at officeWork visaFlexible hoursDay shift
- ...Job Description Job Description Position Overview: The Orbital Welder will support our Production Department by welding high and ultra high purity gas delivery system components using semi-automatic orbital welding equipment. This position works in a clean-room...
- ...Job Description Welder/Fitter - Heavy Construction Equipment Location: South Philadelphia A well-established heavy civil contractor is currently seeking a certified Welder/Fitter to join its busy Heavy Construction Equipment Mechanic Shop. This is a...Full timeFor contractorsApprenticeship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!



