Aluminum Welder
Marine Group Boat Works
Welding Position
The general purpose of this position is to weld simple to complex components and/or structures while meeting all safety, quality, and schedule requirements. Responsible for various types of weld preparation, welding, and weld finishing operations to accomplish welding in accordance with customer drawings and specifications.
Requirements
- Proficient in assigned aluminum welding techniques, including weld fillets, gusset toe and wraps, frame wraps and termination
- Demonstrated ability to weld into corners / vertical intersections with minimal blending
- Ability to evaluate and correct basic weld pick up, with minimal supervision
- Basic knowledge in assigned welding techniques
- Basic knowledge of wire and filler material applications for various steel alloys and aluminum
- Working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
- Working in compliance with all safety, quality, environmental and health requirements.
Job Requirements
- Must be able to pass eye test and workmanship qualification test.
- Must be tested and fit for respirator use.
- Willing to work any shift and overtime as required.
Education and/or Experience
- High school diploma required.
- Minimum of 5 years of proven experience in a welding trade is required.
- Shipyard experience is preferred, but not required.
Knowledge, Skills, and Abilities
- Ability to take direction and follow instructions
- Good mechanical aptitude with ability to produce consistent quality
- Ability to inspect and correct basic weld pick-up without supervision
- Ability to work independently and as part of a team
- Problem-solving and trouble-shooting skills
- Excellent hand-eye coordination; good spatial orientation
- Ability to consistently meet production deadlines
- Ability to use conventional and precision measuring instruments
- Ability to pass a skills evaluation test to demonstrate welding ability
- Ability to weld in uncomfortable positions where applicable
- Ability to work on beams, scaffolding, ladders and confined spaces.
- Ability and willingness to work with and to teach less-skilled workers
- Ability to maintain and perform routine preventive maintenance on welding equipment
Physical Requirements:
- Frequent standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed.
- Physical ability to lift, push, pull and carry 50+ lbs., bend, stoop and climb scaffold and work on elevated work surfaces, beams, ladders, and confined spaces.
- While performing the duties of this job the employee is regularly required to use hands and fingers to handle, feel, talk, or hear.
- The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
- Works in all areas of the shipyard and on-board ships.
- Hearing warning signals and reading and comprehending safety instructions.
- Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area.
- The noise level in the work environment can vary and is often loud.
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Aluminum Welder in Chula Vista, CA vacancy
$67.69k - $80k
...alterations and installations for fleet modernization. The selected Welder** candidate will support PM, working closely with our skilled... ...with gas metal arc welding (GMAW) process in all positions for Aluminum. ~ Must have strong knowledge of reading and interpreting...SuggestedHourly payDaily paidFull timeWork experience placementLocal areaWorldwide$21.83 - $38 per hour
...welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade... ...combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer) Works from blueprints, engineering...SuggestedTemporary work- ...Labor One is hiring Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (***) ***-**** ((***) ***-**** or (***) ***-**** *Please send us a text if we don't answer* Walk-ins...SuggestedWork at officeLocal areaShift work
- ...Proficient in assigned welding techniques Basic knowledge of wire and filler material applications for various steel alloys and aluminum Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Must be able to pass vision test and...SuggestedWork experience placementShift work
$160 per hour
...Pipe Welder Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.$160 per diem, if eligible. Job requirements: Three years of experience in welding Knowledge of welding procedures and various types of welding equipment Proficient...SuggestedDaily paidCurrently hiringShift work$50 per hour
...Pipe Welder Trillium Construction has an immediate long term opportunity for 6G Pipe Welders. Will be welding pipe from 2" to 24". This work is for a mechanical contractor and you will be required to pass a weld test on a 6" s/s pipe (tig weld). M-F some S, 40-5...Hourly payFor contractorsImmediate startDay shift$24 - $36 per hour
...Epsilon Systems Solutions, Inc., is currently seeking a full-time Welder III in National City, CA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic...Hourly payFull timeApprenticeshipLocal area- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$26.26 - $32.53 per hour
...Epsilon Systems Solutions, Inc. is seeking a full time Graving Dock Pipefitter Welder II in San Diego, CA. Summary: Performs various welding processes to repair, for fabricating, installing, and maintaining piping systems and welded structures foundations and...Hourly payFull timeLocal areaNight shift$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other ...Hourly payLocal areaFlexible hoursShift work$35.36 - $38.71 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according ...Hourly payLocal areaFlexible hoursShift work$36 - $54 per hour
Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and...Relocation- ...Structural Welder San Diego, California, United States About the Job Structural Welder As a Structural Welder at Talent Source... ...welding, and ability to weld various materials, such as steel, aluminum, and stainless steel. Knowledge of welding codes and...
- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection...
- ...Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. This position is responsible for welding pipe of various...Permanent employmentWork at officeLocal areaImmediate startShift workAfternoon shift
- 1st Class Structural Welder - Flux Core Labor One Marine & Industrial Services is looking to hire a 1st Class Structural Welder - Flux core. This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support...Daily paidPermanent employmentShift work
- ...moving equipment. We are looking to add more exceptional Mechanics, Welders and Oiler helpers to help us keep our fleet in peak performance... ...complex welding processes such as arc welding, gas welding, aluminum welding, brazing on a variety of materials. Perform related...For contractorsNight shift
$44.12 per hour
...Aerospace Structural Welder Location: FRCASE NAS North Island/Naval Base Coronado, CA Task Description: Aerospace Structural... ...Specifications 1595 in the following materials: Steel, Stainless Steel, and Aluminum. Required education: High school diploma or General...Contract workFor contractors$71k - $80k
...engineering Keep the shop organized, tooling maintained, and the workspace safe Qualifications Skilled welder – proficient in MIG and TIG, with experience on aluminum and stainless steel Comfortable with a broad range of fabrication tasks: cutting, drilling, grinding, forming...Work at officeLocal areaFlexible hoursShift work- ...Job Description Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (***) ***-**** ; (***) ***-**** or (***) ***-**** *...Permanent employmentWork at officeLocal areaImmediate startShift workAfternoon shift
- ...Job Overview Continental Tide is seeking an experienced and skilled Welder II for our San Diego, CA . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & Responsibilities...Hourly payFor contractorsFor subcontractorNight shift
$66.17k
Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions...Minimum wageFull timeApprenticeshipLocal areaRemote work- ...Sheet Metal TIG Welder Talent Source is looking for an experienced Sheet Metal TIG Welder to join our team. The ideal candidate will have a strong background in TIG welding with a focus on sheet metal fabrication, an eye for detail, and the ability to work efficiently...
$40 - $45 per hour
Job Title Iron Worker Company Loenbro, LLC Business Unit/Department Loenbro West Location 2801 Harbor Drive, San Diego, CA, 92113 Reports to Superintendent Employment Type Full Time FLSA Classification Non-Exempt About Loenbro Loenbro is a trusted, long-term construction...Full timeLocal areaShift work$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks...Hourly payLocal areaFlexible hoursShift work- ...Thermite Welder Reporting to the Superintendent or Project Manager, the Thermite Welder is responsible for repairing railroad tracks in heavy construction environments. Primary/Essential Responsibilities and Duties Experienced in Railtech Boutet, Inc., Orgo-Thermit...For contractors
- Job Title Job Description Help Duties You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You...
- ...Job Title: Welder GLOTECH, Inc., founded in 1995, is a privately and minority-owned company serving military, federal and commercial clients. We are a successful Information Technology firm with a large staff currently providing superior information technology and...Temporary workFlexible hours
- ...Shipyard Structural Welder Labor One Staffing is hiring shipyard structural welders in San Diego. Qualifications: Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics...Work at officeShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Aluminum Welder. Be the first to apply!


