CNC Machinist - 1st Shift
$26 - $39.25 per hourPrecision Castparts Corp
CNC Machinist - 1st Shift Country
United States of America State / County
California City
Irvine Division
Fasteners Company
SLC Function
Operations Workplace Type
On-Site Position type
Full Time Opportunity ID
23178 Job Description Job Description Business Profile: PCC Fasteners offers comprehensive product lines that cover virtually every aerospace fastening application; we produce fasteners, precision components, tooling, and engineered system solutions for the automotive, defense, industrial machinery, and other performance-driven markets. PCC Fasteners products' manufacturing operations are spread over four continents, forming a network of industry-leading companies. This enables our customers to utilize our experience and deep product knowledge wherever needed. Embedded in a culture of continuous improvement, our assets and industry leadership ensure that we will consistently deliver our customers the best value in the markets we serve. Location Profile: Headquartered in Irvine, CA, Shur-Lok manufactures fastening systems with superior locking devices for critical requirements, including engine module assembly, structural assembly, rotor blade attachment, and aircraft engine shaft and spindle applications. Operations at the Irvine location include CNC Machining, CNC Waterjet Cutting, Laser Marking, Heat Treating, NDT, and EDM. Position Summary: Level Two : Building upon level one, with minimal assistance, level two machinists operate 2-5 axis CNC/Automated machine cells as well as standalone machines, which requires basic machine setup including preparing and setting up fixtures and cutting tools, as well as loading and adjusting CNC programs and offsets. Level two machinist competencies include using more advanced quality inspection tools and techniques such as height, air gauge, and bench inspection. The level two machinist will have basic competencies in print reading and common CNC G and M codes. May work in one of the three areas: CNC, Turning, or Screw Machine. Typically, 2-4 years of experience. (Gateway and secondary operations, not necessarily CNC) Primary Duties & Responsibilities:
Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk, sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 35 pounds . Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate. Schedule Options: 1st Shift: Monday - Friday (6:00am - 2:30pm) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Pay & Benefits For informational purposes only, the range of pay for this role is $26.00 to $39.25 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan. National Security and Export Controls: This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. About PCC
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.
United States of America State / County
California City
Irvine Division
Fasteners Company
SLC Function
Operations Workplace Type
On-Site Position type
Full Time Opportunity ID
23178 Job Description Job Description Business Profile: PCC Fasteners offers comprehensive product lines that cover virtually every aerospace fastening application; we produce fasteners, precision components, tooling, and engineered system solutions for the automotive, defense, industrial machinery, and other performance-driven markets. PCC Fasteners products' manufacturing operations are spread over four continents, forming a network of industry-leading companies. This enables our customers to utilize our experience and deep product knowledge wherever needed. Embedded in a culture of continuous improvement, our assets and industry leadership ensure that we will consistently deliver our customers the best value in the markets we serve. Location Profile: Headquartered in Irvine, CA, Shur-Lok manufactures fastening systems with superior locking devices for critical requirements, including engine module assembly, structural assembly, rotor blade attachment, and aircraft engine shaft and spindle applications. Operations at the Irvine location include CNC Machining, CNC Waterjet Cutting, Laser Marking, Heat Treating, NDT, and EDM. Position Summary: Level Two : Building upon level one, with minimal assistance, level two machinists operate 2-5 axis CNC/Automated machine cells as well as standalone machines, which requires basic machine setup including preparing and setting up fixtures and cutting tools, as well as loading and adjusting CNC programs and offsets. Level two machinist competencies include using more advanced quality inspection tools and techniques such as height, air gauge, and bench inspection. The level two machinist will have basic competencies in print reading and common CNC G and M codes. May work in one of the three areas: CNC, Turning, or Screw Machine. Typically, 2-4 years of experience. (Gateway and secondary operations, not necessarily CNC) Primary Duties & Responsibilities:
- Level one responsibilities apply to level two, with the following additional duties:
- Perform basic setup operations, including fixtures, cutting tools, and CNC programs.
- Maintain product quality by monitoring and adjusting CNC offsets as needed.
- Perform inspection tasks of intermediate complexity interacting with drawings and more advanced inspection tools.
- Meets production demands.
- Run production on multiple machines at once. (Primary & Secondary)
- The ability to identify and correctly load and secure fixtures with minimal assistance.
- A working knowledge of G and M codes applied in setting and adjusting offsets and interacting with CNC programs.
- A working knowledge of shop math, including tool geometry, positive and negative numbers, and basic geometry.
- The ability to read basic prints in English and apply basic dimensional specifications to inspection processes.
- Typically, this position requires evidence of success in level one machining duties for at least one year before promotion or hire.
- 2-4 years of experience
- GED or High School diploma preferred but not required.
- Barrelnut
- EDF
Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk, sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 35 pounds . Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate. Schedule Options: 1st Shift: Monday - Friday (6:00am - 2:30pm) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Pay & Benefits For informational purposes only, the range of pay for this role is $26.00 to $39.25 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan. National Security and Export Controls: This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. About PCC
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the CNC Machinist - 1st Shift in Irvine, CA vacancy
- ...CNC Machinist – Day Shift We are seeking an experienced CNC Machinist to join our manufacturing team in Costa Mesa, CA. The ideal candidate will have 2–3 years of recent experience setting up, operating, and adjusting CNC multi-task horizontal machining centers in a...Day shiftVisa sponsorshipWork visa
$34 per hour
...Eaton's IS AER FMC division is currently seeking a CNC Machinist III - 1st Shift at our Irvine, CA facility! The hourly rate for this position is $34.00 per hour. The hours for this shift are 5:30 am - 2:00 pm Monday - Friday. Overtime may exceed these hours....Day shiftHourly payPermanent employmentFull timeWork experience placementLocal areaImmediate startRelocation packageMonday to FridayShift work$35 - $45 per hour
...CNC Machinist- Stanton,CA, US Job Description Experience: Mid Level Salary: $35 - $45 per hour Job Details Join an established precision... ...opportunity to support a growing production environment. Hours: 1st shift Days: Monday-Friday Job Requirements Experience with mill 3...Day shiftHourly payFull timeImmediate startMonday to Friday- ...Job Posting FIRST AND SECOND SHIFT AVAILABLE, first shift 5am-1:30pm 2nd shift 1:30pm... ...Under moderate supervision, set-up, operate, CNC multi-task horizontal machining center... ...Requirements: Acceptable set of machinist's tools may be required; and Safety shoes...Day shiftAfternoon shift
$30 - $45 per hour
...Pay Rate $30-$45/hr 1st shift- Monday through Friday 6:00 am - 2:30 pm 2nd Shift- Monday through Friday, 4:00 p.M. to 12:30 a.M. ($1 shift differential) Job Summary As a CNC Mill Machinist, you play a key role in producing precision-machined components that support mission...Day shiftMonday to FridayShift workAfternoon shift$52k - $70k
...Job Description Job Description Job Title: Lathe Machinist Job Description We are seeking a CNC Lathe Set-Up Operator to join our team! You will... ...Monday to Thursday, with every Friday off. Choose from 1st Shift (5:30 am to 4pm) or 2nd Shift (3:30pm to 1:30am). Be...Day shiftWeekly payPermanent employmentAfternoon shift3 days per week$30 - $50 per hour
...engineering and customers, and you'll mentor the machinists and programmers around you. On top of meaningful work, you get a steady 1st shift schedule and a full benefits package:... ...place to do it. Job Details As a CNC Programmer on 1st shift, you will build machining...Day shiftHourly payLocal areaShift work$25 per hour
...Job Title: Entry-Level CNC Machinist (Warehouse Associate) Location: Irvine, CA Job Type: Full-Time Shift: 8:30 AM – 5:30 PM About Us: A global leading manufacturer specializing in electric and hydraulic products is seeking a reliable and detail-oriented...Hourly payFull timeShift work$24 - $28 per hour
...JOB TITLE/LOCATION: Machinist I - Blanking - Santa Ana, CA... ...Sets up and operates manual and CNC machines under supervision.... ...machine abnormalities to the shift team leader or supervisor.... ...supervisors. Ensures continuity between 1st and 2nd shifts through verbal...Day shiftHourly payPermanent employmentWork at officeLocal areaShift workAfternoon shift$25 - $35 per hour
...join us? You'll work first shift in a fast-paced manufacturing... ...is a chance to build hands-on CNC experience with Siemens, Fanuc... ...Location: Corona,Ca Shift: 1st shift 5:00am - 3:45pm Pay:... ...to final landing. The CNC Machinist - 3 Axis supports first shift...Day shiftPermanent employmentTemporary workFor contractorsWork experience placementLocal areaFlexible hoursShift work- Kelly Services, Inc. - - Responsibilities: Set up, operate, and adjust CNC machines; Interpret blueprints and specifications; Inspect parts and ensure tolerances; Plan assignments and machine setups; Identify and repair minor malfunctions
- ...Aerotek - JobID: JP-005854833 [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Immediate startAfternoon shift
$23 - $29 per hour
...Job Description Job Description We are seeking an experienced CNC Setup Machinist to join an established aerospace manufacturing company! This position is ideal for a hands on machinist who can independently set up and operate CNC equipment, make program adjustments...Hourly pay- ...Job Description Job Description We are seeking a Machinist Setup Level I, II to join our team! You will set up machines, help oversee... ...excellent quality control. Responsibilities: Upload programs into CNC machines Setup tools, set lengths, and proof programs/ first...
- ...Job Description Job Description Seeking CNC Machinist to build prototype and low volume production of precision aerospace components. In this position, you will be responsible for both machine programming and machining operations including developing and building the...Full timePart time
- ...We are seeking an experienced CNC Programmer/Machinist to join our team. This is a fulltime on-site role for a CNC Programmer/Machinist located in Irvine, CA. The CNC Programmer/Machinist will be responsible for creating and optimizing CNC programs, setting up and operating...Full time
- ...always easy. That’s where Kelly® comes in. We’re seeking a CNC Machinist to work at a premier manufacturing client in Irvine, CA. Sound... ...really matters in your life. Pay Rate: $36.00 - 38.00/hr Shift: 1st: M-F 6:00 am - 2:30 pm Why you should apply to be CNC Machinist...Temporary workLocal areaImmediate startFlexible hoursShift work
$36 - $38 per hour
...That’s where Kelly® comes in. We’re seeking a CNC Machinistto work at a premier manufacturing client... ...your life. Pay Rate: $36.00 – 38.00/hr Shift: 1st:M-F6:00 am – 2:30 pm Why you should apply to be CNC Machinist: Work in a safe, professional, and well-organized...Immediate startFlexible hoursShift work- ...efficiently sets-up and operates 5-axis CNC Mills to manufacture tooling and parts. Essential... ...effective communication with opposite shift via logbook, verbal communication, and... ...required. Preferred Qualifications CNC Machinist Certification. Forklift and crane experience...Permanent employmentTemporary workLocal areaShift workNight shiftWeekend work
$37.17 - $41.3 per hour
...protect it for future generations. Role Summary We are seeking a CNC Machinist II to program, set up, and run 3-5 Axis Mills and 2-axis... ...qualifications, certifications, experience, skills, geographic location, shift, and organizational needs. The successful candidate may be...Hourly payFull timeContract workTemporary workPart timeLocal areaShift work- ...CNC Lathe MachinistSchedule:Monday – Friday4:00 PM – 2:30 AMTraining: 1 week on 1st Shift (6:30 AM – 4:30 PM)Job Term: Temp to HirePosition Summary:The CNC Lathe Machinist is responsible for operating, programming, and troubleshooting CNC lathes to produce high-precision...Day shiftTemporary work
$37.17 - $41.3 per hour
...it for future generations. Role Summary We are seeking a CNC Machinist II to program, set up, and run 3-5 Axis Mills and 2-axis Lathes... ...qualifications, certifications, experience, skills, geographic location, shift, and organizational needs. The successful candidate may be...Hourly payFull timeContract workTemporary workPart timeLocal areaShift work$45 per hour
...with industry giants like NASA, Boeing, and Lockheed Martin. As a CNC Programmer, you will engage with cutting-edge technology and... ...permanent resident due to ITAR requirements. ~ Available to work 1st shift with flexibility for weekly overtime. ~ DoD clearance...Day shiftHourly payPermanent employmentFull timeImmediate start$20 - $24 per hour
...Pay Rate: $20-$24/hr 1st shift- Monday through Friday 6:00 am - 2:30 pm SUMMARY: The CNC Operator I must be able to set-up and operate computer programmed machines. Along with being able to operate the machinery, it is required to also measure dimensions of finished workpieces...Day shiftWeekly payTemporary workImmediate startMonday to Friday$27 - $35 per hour
...Detail Oriented. Focused. Mechanically Inclined. Our California division, located in Huntington Beach, is hiring a CNC Set-up Operator for 1st shift (6:30am - 3:00pm). Family-owned for over 75 years, Precision Resource is a leading global supplier of precision metal...Day shiftPermanent employmentFlexible hours$32 - $40 per hour
...Job Type: Full-time Experience: 6+ years Machines: Swiss CNC machines, mills, lathes, and other multi-axis equipment CAM... ...GibbsCAM Why this job is worth considering This CNC Programmer/Machinist opening is with a precision aerospace manufacturer, recruited...Hourly payFull time$30 - $40 per hour
...CNC Mill & Lathe Machinist – Aerospace / Precision Prototype Location: Huntington Beach, CA Schedule: 2nd Shift | Start time approximately 4:15 PM or 6:00 PM Pay Range: $30.00–$40.00/hour, depending on experience Industry: Aerospace / Precision Manufacturing Overtime...Afternoon shift$45 - $55 per hour
...Job Description Pay Rate: $45-$55/hr 1st shift- Monday through Friday 6:00 am - 2:30 pm SUMMARY The CNC programmer must be able to read and understand... ...candidate will work side by side with Engineering and Machinist personnel to assure conforming hardware is...Day shiftWeekly payTemporary workWork at officeMonday to Friday- ...Job Description Our client is seeking an experienced CNC Mill Machinist to join a well-established aerospace research and development organization... ...operations as production needs require. This is a 2nd Shift position, with potential training on the day shift. Overtime...Day shiftAfternoon shift
$20 - $26 per hour
...CNC Machine Operator Garden Grove, CA Pay: $20-$26 per hour Schedule: 1st/2nd Shifts About the Role We are seeking a skilled CNC Machine Operator to set up, operate, and maintain CNC machinery within a manufacturing environment. The primary focus of...Day shiftHourly payContract workLocal areaAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Machinist - 1st Shift. Be the first to apply!
Related searches




