Welder
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Welder in Bensalem, PA vacancy
- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...SuggestedWork at officeLocal areaFlexible hours
- ...Welder/Pipefitter JourneymanFounded and family-owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. Rhoads' capabilities enable our customers to achieve superior results by deploying...SuggestedWork at officeMonday to FridayShift workWeekend work
- ...Structural WelderLabor One is currently hiring structural welders in Pascagoula, MS at a shipyard. Job requirements include three years of experience in shipyard, comprehension of written and verbal instructions in English, the ability to hear warning signals, read and...SuggestedCurrently hiringShift work
$25 - $38 per hour
Department: Operations Reports to: Maintenance Manager Position Overview The Maintenance Technician is responsible for maintaining and repairing manufacturing machinery, processing equipment, the mobile fleet, and the manufacturing plant. This role requires a ...SuggestedHourly payFull time- Job Title Job Description Duties You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will ...Suggested
- ...Thompson First Group is seeking Welders for contract to hire positions with a local client in Cinnaminson, NJ. Candidates with experience welding in an industrial setting are encouraged to apply. Responsibilities Accident prevention – actively identify, correct and/or...Contract workLocal area
- ...related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification...Full timeWork experience placementFlexible hours
$28 per hour
...Job Description Now Hiring: Flux Core Welders Location: Philadelphia, PA Long Term Project Wages: $28.00 Per Hour $150.00 Per Diem $400.00 Travel Pay 2 Weeks of lodging paid by Construction Services $1,000.00 Bonus...Hourly payDaily paidWork experience placementImmediate startShift work$30 per hour
Structural Steel FabricatorFounded and family-owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard...Shift workWeekend workDay shiftAfternoon shift- Overview DC Fabricators (DCF) is seeking a talented Welder to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. Shifts may vary depending on company needs. At DCF, you’ll be part of a skilled team that delivers high-quality...Work at officeFlexible hoursShift work
$45 per hour
...Job Description Job Description Structural Welder (Pulse Arc) - Travel Opportunity Pay: $45/hour + $140/day Per Diem Location: Newport News, VA or Charleston, SC Travel Position | Single-Site Assignment Overview We are seeking experienced Structural...Weekly payDaily paidContract workTemporary workWork at office- ...Job Description Job Description Overview: 2nd Shift Welder: 3 PM – 12:30 AM Join our dynamic team as a Welder and bring precision, skill, and craftsmanship to essential construction and manufacturing projects. In this role, you will be responsible for fabricating...Afternoon shift
- Job Description Job Description Description Reporting to the Director of Construction and field supervisor as applicable, this role will install industrial refrigeration systems at various locations around the country. Key Responsibilities Maintain a positive...Apprenticeship
- Job Description Job Description Responsible for the manufacture of hydraulic machinery from drawings. Must be capable of performing the following duties: Read hydraulic and electrical circuit and general arrangement drawings. Understand a bill of material and...
- Repair and Tool TechnicianPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...
- ...for proper and safe work operations for assignments. You will analyze trade requirements through the use of audits, surveillance, and/or incident reports. You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel....
$20 - $30 per hour
...Sign Manufacturer WelderWe are seeking a skilled and detail-oriented Sign Manufacturer Welder to join our team. The ideal candidate will be responsible for welding metal components used in the production of custom signs, ensuring high-quality craftsmanship and structural...Hourly payFull timeWorldwide- Langhorne, PA - Cabot Blvd Full time 00640996 Job Title: Mobile Tire Technician Department: Maintenance Country: United States of America State/Province: Pennsylvania City: Langhorne Full/Part Time: Full time Job Summary: Under...Full timeTemporary workPart timeWork experience placementRelocationVisa sponsorshipRelocation packageShift workNight shift
- Summary You will serve as a PIPEFITTER SUPERVISOR I in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Industrial Maintenance Mechanic The Industrial Maintenance Mechanic is responsible for the installation, maintenance, troubleshooting, repair, and continuous operation of facility systems and critical production equipment. This role performs preventative and corrective...Work at officeFlexible hoursShift workWeekend work
$29 - $35 per hour
...Job Description Job Description Vehicle Equipment Installation Fabricator- Welder (MIG). Reach Beyond with PALFINGER as an Installation Welder at our Trenton, NJ location, where you will play a key role in supporting the welding and installation of truck equipment...Hourly payFlexible hours- ...pressure vessels and pressure vessels for human occupancy as well as military training equipment. We are seeking an experienced Lead Welder to support our manufacturing operations and help maintain our commitment to quality, safety and craftsmanship. The Lead Welder will...Full timeFor contractors
$800 per month
Start Strong with Mavis: Eligible Automotive Tire Technicians Receive Weekly Bonuses Up to $800 Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team today at our state-of-the-art automotive service and retail...Hourly payWeekly payImmediate start$800 per month
Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our state-of-the-art automotive service and ...Hourly payWeekly pay- Job Title: Mobile Tire Technician Department: Maintenance Country: United States of America State/Province: Pennsylvania City: Langhorne Full/Part Time: Full time Job Summary: Under general supervision, this position is responsible to properly installing and inspecting...Full timeTemporary workPart timeWork experience placementVisa sponsorshipShift workNight shift
- DC Fabricators (DCF) is seeking a talented Fitter/Fabricator (2nd Shift) to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. The hours for this position are 3:30 PM - 12:00 AM. At DCF, you’ll be part of a skilled team that...Work at officeFlexible hoursAfternoon shift
$30 - $36 per hour
Senior Industrial Maintenance Technician Pitney Bowes is hiring an onsite direct hire full-time Senior Industrial Maintenance Technician, 3rd Shift in Levittown, Pennsylvania facility. Your hourly pay base range is $30 - $36 plus a $2 shift differential, paid weekly...Hourly payWeekly payFull timeCasual workLocal areaMonday to FridayShift workNight shift- Mavis Tires & Brakes At Discount Prices - Automotive Alignment Technicians Put your career into high gear with Mavis Tires & Brakes At Discount Prices! We're looking for a full-time Automotive Alignment Technician to join Team Mavis at one of our state-of-the-art...Weekly payFull time
- A leading tire manufacturing firm is seeking an Inside Service Technician in Levittown, PA. The role involves servicing commercial tires, ensuring compliance with safety regulations, and providing excellent customer service. Ideal candidates should possess mechanical aptitude...Part time
$800 per month
Job Description Job Description Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800.Mavis Tires & Brakes at Discount Prices is seeking highly motivated Automotive Tire Technicians to join our team Mavis TODAY at our state...Hourly payWeekly payImmediate start
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!



