Crew Member, Columns/Signs

Job Title: Crew Member, Columns/Signs EXO Inc. has been protecting public infrastructure across the U.S. since 2009. Without consistent maintenance and quality assurance, critical assets face a growing risk of failure over time. EXO delivers engineering, inspection, and remediation services for lighting poles, transmission towers, and other infrastructure exposed to ongoing wear from usage, aging, and environmental conditions. Job Title: Crew Member, Columns/Signs EXO Inc. has been protecting public infrastructure across the U.S. since 2009. Without consistent maintenance and quality assurance, critical assets face a growing risk of failure over time. EXO delivers engineering, inspection, and remediation services for lighting poles, transmission towers, and other infrastructure exposed to ongoing wear from usage, aging, and environmental conditions. With deep expertise in vertical infrastructure, EXO builds on years of engineering design and fabrication experience across utilities, telecom, transportation, and retail sectors. This foundation supports a comprehensive inspection and asset management approach that addresses both new installations and aging structures requiring immediate attention. Recognizing that full replacement is often impractical due to cost and safety constraints, EXO developed its “Ex-Tend” approach to manage assets throughout their entire life cycle. From initial quality assurance to ongoing inspection and targeted repairs, this method is designed to extend service life and improve reliability. Supported by data‑driven insights, EXO helps clients monitor asset conditions and make informed, strategic decisions. Position Overview The Crew Member, Columns/Signs travels across the country performing repair, remediation, reinforcement, and maintenance work on retail structures, including I‑beams, structural steel, retail signs, sign supports, bases, mounting systems, and related components commonly found at retail facilities. The ideal candidate has a strong background in construction, structural repair, fabrication, industrial maintenance, or skilled manual labor. This position requires hands‑on experience with power tools and the ability to safely perform drilling, grinding, cutting, concrete repair, painting/coating, structural reinforcement, and other remediation activities. The position also requires strong attention to detail and the ability to accurately document field conditions, work performed, materials used, deficiencies identified, and completed repairs through written reports, photographs, measurements, and electronic documentation. This is a physically demanding, field‑based position requiring frequent travel and the ability to work safely at heights and in varied weather conditions. Key Responsibilities Structural Remediation & Repair Perform hands‑on remediation and repair of structural steel, I‑beams, sign supports, sign frames, bases, brackets, mounting systems, and other retail structures. Inspect structures for visible corrosion, deterioration, damage, loose connections, cracking, failed coatings, and other conditions requiring repair or remediation. Assist with repairs designed to restore structural components to safe and serviceable conditions. Remove damaged, deteriorated, or corroded materials using grinders, saws, drills, impact tools, and other appropriate equipment. Install structural reinforcement components, plates, brackets, stiffeners, braces, bolts, and other repair materials in accordance with project specifications. Assist with the removal and replacement of damaged or deteriorated structural components. Perform repairs to steel bases, connections, mounting points, sign supports, and other structural attachment areas. Assist skilled tradespeople with welding, fabrication, and structural steel repair when required. Apply protective coatings, primers, paints, sealants, and corrosion‑resistant materials to repaired surfaces. Complete repairs in accordance with engineering drawings, work instructions, customer requirements, and company quality standards. Retail Sign Repair & Remediation Perform repair and remediation work on large retail signs, monument signs, pylon signs, sign structures, and associated support systems. Assist with removal, repair, reinforcement, and reinstallation of sign components. Repair or reinforce deteriorated sign supports, structural frames, brackets, and mounting assemblies. Remove corrosion, failed coatings, damaged steel, concrete deterioration, and other compromised materials. Drill and install new anchors, bolts, fasteners, and structural attachment hardware. Assist with leveling, aligning, securing, and properly fastening signs and structural components. Perform caulking, sealing, painting, and weatherproofing of repaired structures and sign components. Assist with electrical or illuminated sign work only as directed and within the employee's qualifications and applicable safety requirements. Maintain the appearance and structural integrity of repaired retail signage and related structures. Field Reporting & Documentation Complete detailed field reports documenting site conditions, deficiencies identified, repairs performed, and the final condition of the structure. Take clear and comprehensive photographs before, during, and after repair and remediation activities. Document structural deficiencies such as corrosion, cracking, damaged steel, deteriorated concrete, failed coatings, loose hardware, damaged anchors, and other conditions observed in the field. Record measurements, dimensions, quantities, materials, hardware, coatings, and other information necessary to document the scope of work. Clearly document the repair process, including materials removed, repairs completed, reinforcement installed, coatings applied, and other remediation activities. Maintain accurate records of labor, materials, equipment, and work activities as required by the company or customer. Use mobile devices, tablets, phones, or other electronic systems to complete field reports and upload photographs and supporting documentation. Ensure photographs are properly labeled or organized so that the location and nature of each deficiency or repair can be clearly identified. Report conditions outside the original scope of work to the foreman or supervisor and document the condition as directed. Identify incomplete work, inaccessible areas, unexpected conditions, or additional repairs that may require follow‑up. Review completed reports for accuracy, completeness, and clarity before submission. Submit required reports and documentation within established project deadlines. Communicate significant structural concerns or safety‑related findings immediately rather than waiting for completion of the written report. Steel, I‑Beam & Structural Component Repair Perform preparation and repair work on I‑beams, steel columns, channels, angle iron, plates, brackets, and other structural members. Remove rust, corrosion, scale, coatings, and damaged material using grinders, wire wheels, needle scalers, and other tools. Drill holes for structural bolts, anchors, reinforcing components, and replacement hardware. Assist with installation of steel plates, brackets, reinforcement members, and other structural components. Use hand tools, power tools, measuring equipment, levels, and other equipment to properly position and install repair components. Measure and verify dimensions, alignment, spacing, and fit‑up prior to completing repairs. Assist welders and other skilled trades with preparation, fit‑up, grinding, cleaning, and finishing activities. Perform structural painting and protective coating applications following required surface preparation procedures. Concrete Repair & Foundation Remediation Perform concrete repair and remediation associated with retail signs, I‑beams, structural supports, and other structures. Drill into concrete using rotary hammer drills, core drills, and other equipment. Remove deteriorated concrete using jackhammers, chipping hammers, grinders, saws, and hand tools. Prepare concrete surfaces for patching, grouting, anchoring, or structural repair. Mix, place, and finish concrete, grout, epoxy, patching compounds, and other repair materials. Install or replace anchors, threaded rods, sleeves, reinforcing steel, and other embedded components. Repair cracks, spalling, damaged edges, deteriorated bases, and other concrete deficiencies. Apply sealants, coatings, and other protective materials to prevent further deterioration. Maintain clean and properly prepared work areas throughout the repair process. Equipment & Tool Operation Safely operate drills, rotary hammer drills, core drills, grinders, impact wrenches, saws, jackhammers, chipping hammers, pressure washers, and other construction equipment. Operate hand tools and power tools necessary for structural repair and remediation. Assist with the operation of aerial lifts, boom lifts, scissor lifts, service trucks, cranes, hoists, and rigging equipment as trained and authorized. Perform pre‑use inspections of tools, equipment, fall‑protection systems, and other job‑site equipment. Maintain tools and equipment in good working condition and report damaged or defective equipment. Follow manufacturer instructions and company procedures for safe equipment operation. Work at Heights & Aerial Operations Perform structural and sign repairs from ladders, aerial lifts, scaffolding, elevated platforms, and other approved access equipment. Work safely at significant heights while maintaining proper fall protection and three‑point contact where applicable. Assist with rigging, hoisting, lowering, and positioning structural components and sign materials. Maintain awareness of overhead hazards, suspended loads, electrical hazards, traffic, customers, and surrounding structures. Follow all fall‑protection, lift‑operation, rigging, and elevated‑work requirements. Job Site Safety & Compliance Strictly adhere to OSHA regulations, company safety policies, customer requirements, and site‑specific safety procedures. Wear required PPE, including hard hats, safety glasses, gloves, hearing protection, high‑visibility clothing, fall protection, and respiratory protection when required. Participate in daily safety meetings, toolbox talks, job hazard analyses, and pre‑task planning. Maintain a safe work area around customers, employees, vehicles, pedestrians, and active retail operations. Identify and communicate hazards before and during work activities. Report unsafe conditions, near misses, injuries, property damage, and equipment issues immediately. Follow proper procedures for working around energized electrical equipment and other potential hazards. Maintain a clean, organized, and professional work site. Teamwork & Communication Work closely with foremen, project managers, welders, fabricators, equipment operators, electricians, and other skilled trades. Follow instructions accurately and complete assigned work according to project specifications. Communicate effectively regarding job‑site conditions, safety concerns, material requirements, and repair progress. Assist other crew members as needed to safely and efficiently complete projects. Maintain a professional appearance and positive relationship with customers and retail facility personnel. Represent the company professionally while working at customer locations. Qualifications & Requirements Previous experience in construction, structural steel, industrial maintenance, fabrication, welding support, sign installation/repair, utility work, or a related field is strongly preferred. Experience repairing or maintaining I‑beams, structural steel, retail signs, sign supports, or similar structures is highly desirable. Experience with corrosion remediation, steel preparation, concrete repair, or structural reinforcement is a plus. Strong mechanical aptitude with the ability to safely operate hand tools and power tools. Experience with grinders, drills, impact wrenches, saws, rotary hammers, or concrete equipment preferred. Experience working from aerial lifts, ladders, scaffolding, or elevated work platforms preferred. Welding or fabrication experience is a significant plus. Ability to read and understand basic drawings, measurements, work instructions, and repair specifications. Ability to use a tape measure, level, and other basic measuring tools accurately. Ability to identify obvious structural deterioration, corrosion, damaged components, loose connections, and other conditions requiring attention. Must be comfortable performing physically demanding work outdoors and at elevated heights. Must maintain a clean driving record and be able to obtain and maintain a DOT driver qualification when required. CDL license is a plus but not required. Must be dependable, safety‑conscious, and capable of working effectively as part of a traveling construction crew. Ability and willingness to learn new repair techniques, tools, equipment, and construction methods. Ability to work independently when assigned tasks while knowing when to seek direction from a foreman or supervisor. Ability to travel a minimum of 75% of the time, including overnight stays, extended assignments, and work across multiple states. Preferred Experience The Following Experience Is Preferred But Not Required Structural steel repair I‑beam or steel column remediation Retail sign installation or repair Pylon or monument sign repair Welding or welding assistance Metal fabrication Corrosion remediation Concrete repair Anchor installation Structural bolting Aerial lift operation Rigging and material handling Construction or industrial maintenance Experience working at heights Physical Requirements Ability to lift, carry, push, and pull up to 75 pounds frequently, with heavier materials handled using team assistance or mechanical equipment. Frequent bending, kneeling, crouching, squatting, twisting, reaching, climbing, and working in awkward positions. Ability to climb ladders and work from elevated platforms and aerial lifts. Ability to work at heights while wearing required fall‑protection equipment. Ability to stand and walk for extended periods throughout the workday. Ability to perform repetitive hand and arm movements while drilling, grinding, cutting, fastening, painting, and using hand tools. Sufficient grip strength and manual dexterity to safely operate power tools and construction equipment. Ability to work on uneven surfaces, around construction debris, excavations, vehicles, and active retail environments. Ability to work outdoors in extreme heat, cold, wind, rain, dust, and other environmental conditions. Adequate vision and hearing to operate equipment, identify hazards, read measurements, and communicate with crew members. Ability to wear required PPE and fall‑protection equipment for extended periods. Physical stamina to perform strenuous construction and remediation activities throughout an extended workday. Willingness to travel at least 75% of the time and work extended shifts, weekends, nights, or irregular schedules when project requirements dictate. Mental Requirements Ability to maintain a high level of situational awareness while working around elevated structures, heavy equipment, suspended loads, vehicles, and active retail environments. Ability to recognize unsafe conditions and immediately communicate hazards to the foreman or supervisor. Strong attention to detail when performing structural repairs, fastening components, preparing surfaces, and applying coatings. Ability to understand and follow drawings, measurements, repair instructions, safety procedures, and verbal directions. Ability to identify potential problems such as corrosion, cracking, loose connections, damaged steel, failed anchors, or deteriorated concrete. Ability to use sound judgment when determining whether a task or condition requires additional direction from a supervisor or skilled trade. Ability to remain focused and alert during physically demanding work and elevated operations. Ability to adapt to changing job‑site conditions, customer requirements, weather, schedules, and project priorities. Ability to work effectively under time constraints while maintaining safety and quality. Strong communication and teamwork skills. Willingness and ability to learn structural repair, remediation, equipment operation, and construction techniques. Strong commitment to following safety procedures even when working under pressure or tight deadlines. Dependability, accountability, and attention to quality. Benefits Exo offers a comprehensive benefits package including: Medical Dental Vision Health Savings Account/Flexible Spending Accounts Life and Accidental Death & Dismemberment Short Term and Long-Term Disability Accident, Hospital Indemnity and Critical Illness 401k with Company Match PTO 10 Paid Holidays FLSA Status: Non-Exempt Pay Range: $24-27.00 Hourly, depending on experience and qualifications Reports To: Supervisor, Field Operations Note: The above job description is a general overview of the responsibilities and requirements typically associated with the role of a Crew Member, Columns/Signs. The specific duties and requirements may vary depending on organizational requirements and industry standards. Exo is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #J-18808-Ljbffr Exo