Public Works Maintenance Worker I/II - Temporary Part-Time (TPT)

Public Works Maintenance Worker

This is a continuous recruitment. Applications will be reviewed on a continuous basis until the position is filled. This position is Temporary Part-time (TPT) and the benefits tab does not apply to this position. Under immediate (Public Works Maintenance Worker I) or general (Public Works Maintenance Worker II) supervision, performs a variety of semi-skilled and skilled tasks in the construction, maintenance, and repair of streets, signs, sewers, storm drains, bike pump stations, drainage channels, and related public works infrastructure and facilities; operates light and moderately heavy power-driven equipment; and performs related work as required. Receives immediate (Public Works Maintenance Worker I) or general (Public Works Maintenance Worker II) supervision from assigned supervisory or management personnel. Exercises no direct supervision over staff. Public Works Maintenance Worker I: This is the entry-level classification in the Public Works Maintenance Worker series. Initially under close supervision, incumbents learn and perform routine semi-skilled and skilled tasks in the construction, maintenance, and repair of streets, signs, sewers, storm drains, bike pump stations, drainage channels, and related public works infrastructure and facilities. As experience is gained, assignments become more varied, complex, and difficult; close supervision and frequent review of work lessen as an incumbent demonstrates skill to perform the work independently. Positions at this level usually perform most of the duties required of the positions at the Public Works Maintenance Worker II level but are not expected to function at the same skill level and usually exercise less independent discretion and judgment in matters related to work procedures and methods. Work is usually supervised while in progress and fits an established structure or pattern. Exceptions or changes in procedures are explained in detail as they arise. Public Works Maintenance Worker II: This is the fully qualified journey-level classification in the Public Works Maintenance Worker series. Positions at this level are distinguished from the Public Works Maintenance Worker I level by the performance of the full range of duties as assigned, working independently, and exercising judgment and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit. Positions in the Public Works Maintenance Worker class series are flexibly staffed; positions at the Public Works Maintenance Worker II level are normally filled by advancement from the Public Works Maintenance Worker I level; progression to the Public Works Maintenance Worker II level is dependent on (i) management affirmation that the position is performing the full range of duties assigned to the classification; (ii) satisfactory work performance; (iii) the incumbent meeting the minimum qualifications for the classification including any licenses and certifications; and (iv) management approval for progression to the Public Works Maintenance Worker II level.

Examples of typical job functions (illustrative only) essential functions may include, but are not limited to, the following: Positions at the Public Works Maintenance Worker I level may perform some of these duties and responsibilities in a learning capacity. All Assignments: Sets up traffic safety control devices, cones, and barricades as necessary. Operates a variety of equipment and vehicles; performs routine preventive maintenance on equipment and vehicles as assigned. Utilizes proper safety precautions related to all work performed. Receives work orders electronically; prepares, maintains, and inputs detailed logs, records, and reports of maintenance and repair activities via mobile and stationary digital devices into automated software systems. Performs emergency street, sewer, storm drain, or other public works infrastructure maintenance work. Responds to hazardous material incidents. Sets up and takes down equipment for City special events. Picks up and discards trash, brush, leaves, debris, deceased animals, discarded furniture; trims and removes trees, shrubs, and bushes; performs weed abatement. Maintains inventory of safety-related supplies. Trains employees on how to use tools and all types of equipment. Performs other related duties as assigned. When assigned to Streets Maintenance Division: Performs street maintenance duties; operates equipment such as trucks, tractors, jackhammers, and backhoes for a variety of construction and maintenance operations involving streets, sidewalks, gutters, sewer lines, and drainage channels. Grinds and patches concrete and asphalt hazards in streets and sidewalks; repairs potholes. Paints traffic markings on streets, crosswalks, parking lots, and curbs. Designs, manufactures, and installs street signs, traffic signs, and special signs for municipal facilities; removes signs no longer required. Fixes and maintains City-owned fences. Spreads asphalt in patching and repairing streets. When assigned to Stormwater Division: Operates and maintains storm drainage channels, ditches, catch basins, storm drain stations, and bike pump stations; cleans out drains; prepares stormwater drainage systems for rainy season. Conducts routine inspections on channels and outlying areas to ensure water can flow properly without any obstruction. Responds to and mitigates flood calls; pumps excess surface water; responds to the public when various items fall into drain inlet. Installs, replaces, and repairs storm drain inlets, underground pipes, lateral lines, and culver pipes throughout different channels.

Qualifications Positions at the Public Works Maintenance Worker I level may exercise some of these knowledge and abilities statements in a learning capacity. Knowledge of: Basic methods, tools, materials, and equipment used in maintenance work. Basic construction and repair methods. Principles and practices of work safety. Traffic control, confined space entry, and lockout/tagout safety procedures. Methods, techniques, tools, and the operational characteristics of mechanical equipment used in the construction and maintenance of streets, signs, sewers, storm drains, bike pump stations, drainage channels, and related public works infrastructure and facilities. Procedures and techniques of concrete and asphalt work. Hazards associated with the work and proper safety precautions. Traffic laws, ordinances, and rules involved in truck and heavy equipment operations. Purposes and uses of a variety of vehicles, equipment, power tools, and hand tools including motorized and hydraulic equipment. Standards relating to installation, location, and required maintenance of traffic signs and pavement markings. Properties of backfill materials, construction materials, concrete, asphalt, hot patch, cold patch, oils, paints, and a variety of other materials used in maintenance work. Techniques for providing a high level of customer service by effectively interacting with the public, vendors, contractors, and City staff. The structure and content of the English language to effectively perform work. Modern equipment and communication tools used for business functions and program, project, and task coordination, including computers and software programs relevant to work performed. Ability to: Perform semi-skilled and skilled maintenance, construction, and repair work in the area of work assigned. Review, interpret and complete assigned work orders. Operate a variety of light and heavy mechanical equipment such as forklift, backhoe, or bucket truck. Perform heavy manual labor. Obtain certifications as required by OSHA/CalOSHA and provided by the City, to perform assigned duties. Operate a variety of vehicles and equipment in a safe and effective manner. Use and operate hand tools, mechanical equipment, and power tools and equipment required for the work in a safe and efficient manner. Read and interpret basic maps and blueprints. Assist in the training of others in the safe operation of tools and equipment. Perform asphalt, concrete, and pipe work; work with paints and prepare surfaces for painting. Work safely and adhere to principles of safety when working near traffic, in confined spaces, in trenches, or in other environments. Use tact, initiative, prudence, and independent judgment within general policy and procedural guidelines. Effectively use computer systems, software applications, and modern business equipment to perform a variety of work tasks. Communicate clearly and concisely, both orally and in writing, to effectively perform work. Establish, maintain, and foster positive and effective working relationships with those contacted in the course of work. Education and Experience: Any combination of training and experience that would provide the required knowledge, skills, and abilities is qualifying. A typical way to obtain the required qualifications would be: Education: Public Works Maintenance Worker I/II: Equivalent to completion of the twelfth (12th) grade. Experience: Public Works Maintenance Worker I: One (1) year of general maintenance experience. Public Works Maintenance Worker II: Three (3) years of increasingly responsible general maintenance, general construction, or skilled trades experience, or two (2) years of experience performing duties similar to a Public Works Maintenance Worker I with the City of Davis. Licenses and Certifications: Possession of a valid California Driver's License, to be maintained throughout employment. Possession of, or successful acquisition within 12 months from date of appointment, a valid Class "A" or "B" California Driver's License, with appropriate endorsements, to be maintained throughout employment. Possession of, or successful acquisition within probationary period, a valid certification in American Red Cross CPR, First Aid and AED to be maintained throughout employment. Possession of Pesticide Applicator's license, is desirable

Physical Demands Must possess mobility to work in a field environment; strength, stamina, and mobility to perform medium to heavy physical work, to work in confined spaces and around machines, to climb and descend ladders, to operate varied hand and power tools and construction equipment, and to operate a motor vehicle and visit various City sites; vision to detect shades of color, read printed materials and a computer screen; and hearing and speech to communicate in person and over the telephone or radio. The job involves fieldwork requiring frequent walking in operational areas to identify problems or hazards. Finger dexterity is needed to access, enter, and retrieve data using a computer keyboard and to operate above-mentioned tools and equipment. Positions in this classification bend, stoop, kneel, reach, and climb to perform work and inspect work sites. Employees must possess the ability to lift, carry, push, and pull materials and objects weighing up to 9