Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Repair and Tool Technician

Home Depot

Job Description

Position Purpose:

Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Repair and Tool Technician in Carrollton, TX vacancy
  • $19 - $19.5 per hour

     ...Job Description Job Description Clean Room Assembly Technician – 1st Shift Location: Carrollton, TX Shift: 6:00 AM – 2:30 PM...  ...team. As a Clean Room Assembly Technician , you will use hand tools, power tools, and testing equipment while following strict documentation... 
    Suggested
    Full time
    Temporary work
    Shift work
    Day shift

    SkySource Solutions

    Carrollton, TX
    11 days ago
  •  ...the + You should be proficient in: GD&T Dovetail CNC Equipment Troubleshooting CNC Tooling Troubleshooting Skills CNC Programming CNC Machine Repair CNC Machine Installation OSHA 10-Hour Certification (OSHA 10) G-Code Design for Manufacturability... 
    Suggested

    Regal Staffing Services

    Carrollton, TX
    12 hours ago
  • $19.41 per hour

     ...oriented environment. Job Summary: The CNC Machinist is responsible for operating a variety of machines and utilizing specialized tools to build, repair, or modify precision products. This role requires proficiency with both manual machine shop equipment and CNC machinery.... 
    Suggested
    Full time
    Temporary work
    Monday to Friday
    Day shift

    AppleOne

    Plano, TX
    1 day ago
  • $26 - $32 per hour

     ...engineering drawings, blueprints, sketches, and CAD/CAM files Load CNC programs and verify accuracy through test cycles Set up tools, fixtures, and materials according to setup sheets and job specifications Establish and adjust work offsets, tool offsets, and... 
    Suggested
    Hourly pay
    Full time
    Monday to Friday

    AER

    Carrollton, TX
    9 days ago
  •  ...Position Summary : The CNC Machinist-Programmer sets up and operates machine tools such as lathes, milling machines, boring machines, and grinders, to machine metallic and nonmetallic work pieces by performing the essential job functions listed below. This role is also... 
    Suggested
    Apprenticeship
    Work at office
    Flexible hours
    Rotating shift

    ASSA ABLOY

    Carrollton, TX
    4 days ago
  • $17 per hour

    Job Description Job Description Regal Staffing Services is hiring a CNC Machine Assistant for a facility in the Carrollton, Tx area. Starting Rate: $17.00 per hour Schedule: Monday to Thursday , 6:00 AM – 4:00 PM Responsibilities: Assist CNC machine operators...
    Hourly pay
    Shift work

    Regal Staffing Services

    Carrollton, TX
    4 days ago
  • $800 per month

     ...Automotive Tire Technicians Start Strong with NTB & Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800...  ...locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive... 
    Hourly pay
    Weekly pay
    Full time
    Immediate start

    Mavis Tire

    Carrollton, TX
    5 days ago
  • $18 - $24 per hour

     ...and welding pipes. Key Responsibilities: Install, assemble, and repair piping systems according to specifications and blueprints. Cut, thread, bend, and weld pipes using hand and power tools. Inspect and test installed systems for leaks, pressure levels, and... 
    Full time
    Day shift

    VIP Staffing

    Irving, TX
    5 days ago
  •  ...SPRINKLER SERVICE TECHNICIAN JOB DESCRIPTION Job Responsibilities include but are not...  ...and/or participate in the trenching and repair of underground mains including backfilling...  ...Maintenance and care of equipment - trucks, lifts, tools, etc. Keep jobsites clean and... 
    For contractors
    Apprenticeship
    Work experience placement
    Work at office
    Local area

    Allied Fire Protection

    Carrollton, TX
    2 days ago
  • : Part-Time Tire Technician At Discount Tire, we change more than tires. We make dreams come true. As a Part-Time Tire Technician,...  ...Everyday Work Includes * Busting tires: Install, rotate, balance, repair, and clean new tires and wheels * Delighting customers:... 
    Weekly pay
    Part time
    Local area

    Discount Tire

    Carrollton, TX
    4 days ago
  • $40 - $50 per hour

    Tour Club Fitter Come work with us, not for us! 2nd Swing is a one-of-a-kind, forward thinking, customer-centric golf retail company. Our employees are highly valued and supported in a positive, collaborative environment. At 2nd Swing you will find: Vast Exposure...
    Hourly pay
    Full time
    Flexible hours

    2nd Swing Golf

    The Colony, TX
    5 days ago
  •  ...actively seeking an experienced Fire Sprinkler Technician to join their growing team. This is an...  ...• Install, inspect, test, service, and repair fire sprinkler systems in commercial,...  ...off and holidays • Company vehicle and tools provided depending on role • Professional... 
    For contractors
    Local area

    gpac

    Plano, TX
    1 day ago
  •  ...Fire Sprinkler Technician The Fire Sprinkler Technician is responsible for the installation, testing, inspection, service, and repair of fire sprinkler systems. Respond to emergency and maintenance calls and troubleshoot/replace faulty components to restore fire sprinkler... 
    For contractors
    Local area

    Thompson Safety

    Farmers Branch, TX
    5 days ago
  •  ...determined by approved by facilities management. # Install and repair locks and locking devises; perform all locksmith-related...  ...Mental Demands/Physical Demands/Environmental Factors: Tools/Equipment Used: Keys, blanks, picks, security equipment, test equipment... 
    Temporary work
    Immediate start

    Irving Independent School District

    Irving, TX
    3 days ago
  • $23.62 per hour

     ...PRIMARY PURPOSE: Responsible for the maintenance and repair of locking devices and building locking systems components. Work...  ...maintain the buildings EQUIPMENT USED: Use of carpentry hand tools, power tools, stamp key machine and vehicle key box; operation... 
    Hourly pay
    Contract work
    Immediate start

    Plano ISD

    Plano, TX
    4 days ago
  •  ...with a 30 Minute Lunch. This position will also alternate a on call basis as a technician for After hours and weekend calls. Primary Duties Include: Ability to perform inspections and repairs of fire sprinkler systems in residential and commercial buildings. Inspect,... 
    Full time
    Monday to Friday
    Weekend work

    United Fire Protection

    Irving, TX
    18 days ago
  • Your Job As a CNC Machinist , you will produce high-quality machined parts by setting up and operating CNC equipment while maintaining safety, quality, and productivity standards. This role plays a critical part in supporting manufacturing operations through precision...
    Permanent employment
    Flexible hours
    Weekend work
    Afternoon shift

    Smiths Interconnect

    Irving, TX
    10 hours ago
  •  ...according to specifications Load raw materials and components onto machines and ensure proper setup Evaluate and adjust CNC tools and machine paths as needed Inspect finished components using measuring tools (calipers, micrometers, gauges) to ensure... 
    Work at office
    Flexible hours

    ThreePDS Inc.

    Lewisville, TX
    9 hours ago
  •  ...accurate machining Perform routine machine maintenance and report any mechanical issues Inspect finished parts using measurement tools to verify conformance to specifications Collaborate with quality and engineering teams to troubleshoot and optimize production... 
    Flexible hours

    Molex

    Addison, TX
    2 days ago
  • Company Description Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial...
    Permanent employment
    Apprenticeship
    Weekend work
    Day shift

    Smiths Group

    Irving, TX
    5 days ago
  • CNC Machinist (1st Shift) Produces machined parts by setting up and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Responsibilities: Setup and operation of...
    Permanent employment
    Apprenticeship
    Weekend work
    Day shift

    Smiths Group plc

    Irving, TX
    10 hours ago
  •  ...school diploma or equivalent required; technical or trade certification preferred. Strong understanding of CNC machine operation, tooling, and setup. Proficient in MPR programming and G Code machining technology (preferred). Ability to interpret technical... 
    Worldwide
    Weekend work

    Hollman

    Irving, TX
    2 days ago
  •  ...of aluminum and steel components with tight tolerances. Responsibilities Provide programming support for machining parts, tools, or sheet metal on numerically controlled machine tools by writing programs of machine. Determine dimension and configuration of... 
    Work at office
    Shift work

    Bowhead

    Plano, TX
    10 hours ago
  •  ...and hitting cycle start - this isn’t that job. We’re looking for machinists who can actually set up, read prints, work with tooling, and take ownership of their work . This is a hands-on role in a shop that values quality, problem-solving, and people who... 

    gpac

    Irving, TX
    5 days ago
  •  ...define dimensions, tolerances, and machining sequences Produce parts to close tolerances using appropriate gauges and inspection tools Document setups and machining processes using written descriptions, sketches, and/or models to support repeatability and knowledge... 
    Permanent employment
    Apprenticeship
    Flexible hours
    Weekend work
    Day shift

    Koch Industries

    Irving, TX
    11 hours ago
  •  ...tolerances, and the perfect sequence of operations. Work your magic with close tolerances using precision gauges and inspection tools to ensure every finished product is absolutely flawless. Document your setup and operation expertise through written descriptions... 
    Permanent employment
    Apprenticeship
    Flexible hours
    Weekend work
    Day shift

    Smiths Group plc

    Irving, TX
    8 hours ago
  • $20 per hour

     ...and technical drawings Monitor machining processes and make necessary adjustments Inspect finished parts using precision measuring tools Perform routine maintenance and keep machines clean Follow all safety procedures and maintain a clean work environment Requirements:... 
    Hourly pay
    Flexible hours
    Shift work
    Weekend work

    Abundant Solutions

    Plano, TX
    5 days ago
  • CNC Operator II Location(s) Addison, Texas Company Molex Career Field Operations & Manufacturing Job Number 185487 CNC Machine Operator - 2nd Shift Location: Phoenix, Arizona Job Number: 181034 Skilled CNC Machine Operator - Weekend Shift Location: Phoenix...
    Shift work
    Weekend work
    Day shift
    Afternoon shift

    Koch Industries

    Addison, TX
    10 hours ago
  •  ...Support and guide CNC Programming Techs and CNC Programmers in NPI and production activities. Investigate, develop, and test custom tooling as needed. Perform administrative duties as assigned. Qualifications Minimum 5 years of CNC-related experience in... 
    Relocation package
    Monday to Friday
    Day shift

    Marmon Holdings, Inc.

    Addison, TX
    3 days ago
  • $20 per hour

     ...and blueprints Monitor machining processes and make necessary adjustments Inspect finished products using precision measuring tools Perform basic machine maintenance and cleaning Follow all safety procedures and maintain a clean work environment Requirements... 
    Hourly pay
    Flexible hours
    Night shift

    Abundant Solutions

    Plano, TX
    4 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!