Welder - Submarine Building
Department of the Navy - Agency Wide
Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Welder - Submarine Building in Nacogdoches, TX vacancy
$28.8 - $43.2 per hour
...and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: High School...BuildingRelocation$23.75 per hour
...Eaton’s ES AMER ESS division is currently seeking a Pads Welder - 2nd Shift at our Nacogdoches, TX facility! The core hours are Monday-Friday, 2:00 p.m. - 10:30 p.m. Overtime may exceed these hours and be manadatory at times. The hourly rate for this position is $23.7...BuildingHourly payH1bLocal areaVisa sponsorshipRelocation packageMonday to FridayShift workAfternoon shift- ...and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: High School...SuggestedRelocation
$39.34 per hour
...Welder/Mechanic Settled in the award-winning San Diego Convention Center, the Welder/Mechanic performs the repair and maintenance... ...completed work for conformance with requirements of all applicable building standards/codes. Inspects work performed by contractors to...BuildingFor contractorsApprenticeshipLocal areaFlexible hoursShift workWeekend work- ...Competitive Pay Job Summary We are seeking a skilled Welder to join our team. In this position, you will need accurately weld... ...to detail and proven experience as a Welder. Knowledge of local building codes for railings and handrails. Responsibilities Plan layout...BuildingLocal area
- ...moving equipment. We are looking to add more exceptional Mechanics, Welders and Oiler helpers to help us keep our fleet in peak performance... ...a career path to management for motivated employees. Building a team of positive people who love what they do. No monotonous...BuildingFor contractorsNight shift
$18 - $26 per hour
**SUPERSTAR FABRICATOR / WELDER WANTED** We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically... ...premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water...Hourly payFull timeRelocationMonday to FridayShift workDay shift$35.36 - $38.71 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according ...Hourly payLocal areaFlexible hoursShift work$160 per hour
...Pipe Welder Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.$160 per diem, if eligible. Job requirements: Three years of experience in welding Knowledge of welding procedures and various types of welding equipment Proficient...Daily paidCurrently hiringShift work$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other...Hourly payLocal areaFlexible hoursShift work- ...Welder (San Diego, CA) Job Locations US-CA-San Diego Job ID 2026-1965 # of Openings 10 Category Construction Overview GLOTECH, Inc., founded in 1995, is a privately and minority-owned company serving military, federal...Temporary workFlexible hours
- ...Job Description: Submarine Senior Systems/Platform Engineer Full TimeSan Diego, CA, US30+ days agoRequisition ID: 1035Apply... ...schedules. Quality & reliability oversight: Direct teams building diagnostics, regression suites, and observability; ensure platform...BuildingFull timeContract workTemporary workRemote work
$25 per hour
...Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat...Currently hiringWork at officeShift work- ...Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. This position is responsible for welding pipe of various...Permanent employmentWork at officeLocal areaImmediate startShift work
- ...Job Title: Welder II Client: Aerospace Manufacturing Industry Duration: 06 months role Location: San Diego, CA 92121 Shift: Mon - Fri (5:30 AM to 2:00 PM) Qualifications: ~ The Welder II works with minimal supervision to prepare and weld according...Permanent employmentShift work
- ...Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (***) ***-**** ; (***) ***-**** or (***) ***-**** *Please send us a text if we don'...Permanent employmentWork at officeLocal areaImmediate startShift workNight shift
$33.76 - $37.11 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other ...Hourly payLocal areaFlexible hoursShift work$30 - $40 per hour
...Thermite Welder Date: May 21, 2026 Location: San Diego, CA, US Stockton, CA, US Company: RailWorks Job ID: 19797 Benefits Offering RailWorks is committed to helping our employees live better lives. We offer comprehensive benefits packages to eligible employees...For contractors- ...Aluminum Welders We have immediate openings for Aluminum Welders. You must be able to set up welding machines and equipment (both MIG and TIG); read and interpret blueprints to understand the product's specifications; weld, cut, grind and finish the product; and inspect...Work at officeImmediate start
- ...Shipyard Structural Welder Labor One Staffing is hiring shipyard structural welders in San Diego. Qualifications: Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics...Work at officeShift work
$36 - $38 per hour
...Specialty Welders (Alum, CuNi, Stainless; TIG) Journeyperson-3003 Marine Welding San Diego, California Contract Jun 8, 2026 NSC Staffing is seeking a highly skilled Journeyman Welder for an exciting opportunity to perform pipe welding on various metals within a shipyard...Permanent employmentContract work- ...Structural Welder San Diego, California, United States About the Job Structural Welder As a Structural Welder at Talent Source, you will play a crucial role in fabricating and welding structural components for marine vessels within the shipyard environment. Below...
$50k - $62.4k
...trades teams provide expert solutions on submarine alterations and installations for fleet modernization... ...and work leadership to less-experienced welders. May serve as a group leader. Minimum... ...more than a job - it’s an opportunity to build a new future. We offer competitive...Hourly payDaily paidFull timeContract workLocal areaWorldwideWeekend work- ...Essential Duties & Responsibilities: Apply craft for layout, fit up. Install and maintain piping systems on board ships, and submarines such as steam, heat, power, hydraulics, compressed air, sea water, freshwater and chilled water systems. Braze various pipe items...Local area
$25 per hour
...Aluminum Structural Welders Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a shipyard. Pay rate is up to $25 + $160 per diem, if eligible. Job requirements include three years of experience in aluminum welding and flux core arc welding...Daily paidCurrently hiringImmediate startShift work$25 - $35 per hour
...Welder Job Category: Operations Labor Requisition Number: WELDE005234 Posted: June 1, 2026 Full-Time On-site San Diego, CA 92... ...equipment that need repair. Weld new parts for assembly. Build up parts that have worn thin. Repair cracks in mobile equipment...Full timeShift work- Job Title Job Description Duties You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will ...
- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound... ..., spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...for proper and safe work operations for assignments. You will analyze trade requirements through the use of audits, surveillance, and/or incident reports. You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel....
$36.18 per hour
...underground or submerged equipment and pipes; amplifier circuits; and related electrical equipment. You will be working from building plans, blueprints, wiring diagrams, engineering, drawings, and electrical maintenance and repair manuals to plan and lay out the routing...BuildingHourly payWork experience placement
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder - Submarine Building. Be the first to apply!
Related searches

