Welder
$25 - $32 per hourDelphinus Engineering
WelderFounded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA.Company Benefits:Comprehensive health program for employee and dependentsCompany paid Dental and Vision401(k) with company matchShort-term and Long-term disability - Company paidLife Insurance and AD&D - Company paidVoluntary Spouse and Child Life InsurancePaid time off with company holidayTuition ReimbursementEmployee Assistance Program (EAP)Description:Position Location: Bremerton, WASummary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required.Duties and Responsibilities include the following. Other duties may be assigned:Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials.Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer)Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designedMay position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand toolsKnowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materialsMaintain certification in the welding procedure(s) as required by Quality Assurance ManagerFill out Objective Quality Evidence (OQE) formsFollow Quality Assurance welding proceduresPerforms all work in accordance with established safety proceduresParticipates in special projects as requiredQualifications:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions.Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.Computer Skills: Must possess basic computer skills to enter data into different data basis.Education/Experience: Typically requires 1+ years related experience. High School Diploma or GED, plus technical/vocational training or the equivalent combination. Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred.Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures.Skill to make complete penetration and complete fusion welds.Read and understand blueprints and specifications.Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed.Equipment: General Hand Tools, Welding Machines, Precision Measuring Instruments, Pneumatic and Electric Hand Tools.Knowledge, Skills and Other Abilities:Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals.Must possess working knowledge of welding procedures and tools.Knowledge of welding shrinkage, welding techniques and physical properties of metal.Ability to qualify using welding procedures on plate and/or pipe.Must be able to pass Workmanship Inspection training.Must be able to read and understand material safety data sheets (MDS).Able to follow safety procedures.Physical Demands:While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test.Work Environment:While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.Wage Range: $25.00 - $32.00 In determining compensation various factors will be considered, including but not limited to the responsibilities of the position, educational background, relevant experience, knowledge, skills, and abilities, as well as geographic location.EOE Statement: We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.Exempt/Non-Exempt: Non-ExemptReq Number: WEL-26-00004
$48.08k - $60k
...Respirator Physical and a J-1 Eye Test. Must provide own hand tools as designated per trades specialty. Preferred Requirements Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction. Completion...SuggestedHourly payFull timeWork experience placementLocal areaWorldwide- ...Marine Welder - 30690Join our Elevator Support Unit (ESU)! The position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. The selected candidate will support ESU by performing a variety of skilled...SuggestedFull time
$30 - $32 per hour
...Job Description Job Description Job Title: Structural Welder - $32-$34/hr - per diem $181/day 7 days/week Job Description We are seeking a skilled Structural Welder with expertise in NAVSEA standards, fitting, brazing, and experience in a Naval shipyard environment...SuggestedWeekly payDaily paidContract workTemporary workShift work$35 per hour
...Welder/Fabricator 3Fabrication DepartmentReports To: Fabrication SupervisorLocation: BremertonFSLA Status: Non-ExemptShift: Days 5:00 am – 3:30 pm M-THPay: Starting at $35.00 per hour DOEWhy work with us?Opportunity to work for an employee-owned company.Collaborative...SuggestedHourly pay- Job TitleJob DescriptionYou will be identifying and associating metals, alloys and filler metal by color code and standard markings.You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.You will be using test methods for ...Suggested
$3,000 per month
...Welder IIThe Welder II supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD). This role is based in Bremerton, WA. This role requires welding proficiency, technical judgment, and the ability to perform complex work in high-consequence...ApprenticeshipCasual workNight shift$160 per hour
...Structural WeldersLabor One is currently hiring structural welders in San Diego, CA at a shipyard. $160 per diem, if eligible.Job requirements:Three years of experience in steel welding and flux core arc welding processes.Proficient in flat, vertical, overhead, and horizontal...Daily paidCurrently hiringWork at officeShift work$29 - $41 per hour
...Job Description The Welder II supports marine and shipboard operations at Oceaneering's Marine Services Division (MSD). This role is based in Bremerton, WA. This role requires welding proficiency, technical judgment, and the ability to perform complex work in high...Hourly payApprenticeshipCasual workRelocation packageFlexible hoursNight shift- ...PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job opening for a Structural Welder Journeyman II , with a minimum of 5 years of marine and/or shipyard experience preferred; supporting our Bremerton & Everett,...
$28 - $36 per hour
...layoff, recall, transfer, leave of absence, compensation, and training. Description ARMADA INC. POSITION DESCRIPTION TITLE: Welder REPORTS TO: Superintendent FLSA STATUS: Non-Exempt Pay Range: $28.00 - $36.00 per hour DOE FT / PT STATUS: Full Time...Hourly payDaily paidFull timeFor contractorsLocal area- ...Welding PositionYou will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$29.61 - $38.87 per hour
...Shift: ALL Security Clearance: No Clearance *HIRING LOCALLY ONLY* ESSENTIAL FUNCTIONS AND PURPOSE (Job Description) The Welders are responsible for accomplishing work in accordance with work specifications safely, with the highest quality and in a...Hourly payLocal areaShift workWeekend work$28 - $36 per hour
...Title Welder About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has...Hourly payDaily paidFull timeFor contractorsLocal area- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...arrange for proper and safe work operations for assignments.You will analyze trade requirements through the use of audits, surveillance, and/or incident reports.You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel....
$48.08k - $60k
...anda J-1 Eye Test. Must provide own hand tools as designated per trades specialty. Preferred Requirements Production welder experience while in the Navy or working as a civilian production welder supporting Navy ship repair or new construction. Completion...Hourly payFull timeWork experience placementLocal areaWorldwide- ...specifications, standards, plans, and schedules.Training and mentoring less skilled employees, demonstrating proper work methods, and discussing viable alternatives and considerations.Serving as an Expert Welder leading a group to ensure work assignments are completed....
$24 - $36 per hour
Sheet Metal MechanicFounded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square,...- Labor One is Now Hiring Pipefitters for San Diego, CA Shipyard A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic...Daily paidImmediate start
- DutiesHelpYou will pass on instructions to members of the work group.You will check and report work progress of the group.You will perform work site inspections.You will receive job or work assignments from welding supervisor.You will check and report work progress of ...Shift work
$23 - $28 per hour
Ad-West Realty is seeking a Property Maintenance Repair Technician to maintain the functionality, safety, and appearance of the on-site property. You will perform repairs, inspections, and manage work orders to support tenant satisfaction and high property standards. ...Hourly payFull time- Duties Help You will pass on instructions received from supervisors and get work started. You will work with other workers and set the pace. You will ensure plans, blueprints, materials, and tools are available, and needed stock is obtained from supply locations...
- Pipefitter Leader You will serve as a PIPEFITTER LEADER in the DEPARTMENT OF NAVY to include work sites of Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants...
$22.5 - $25 per hour
Job Description Job Description Job description: ABOUT US At Insight Pest Solutions, we don’t just eliminate pests, we build relationships, empower teams, and create safe, thriving homes. We’re proud to be ranked among the Inc. 5000 and PCT Top 100 companies...Hourly paySeasonal workLocal areaMonday to FridayDay shift- Pipefitter Leader (Expert) You will serve as a PIPEFITTER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located...
- Expert Pipefitter You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed. You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and...
- Job Description Job Description Description: Position Summary The Maintenance Technician is responsible for performing routine and emergency maintenance to ensure the property remains in top condition and provides a safe, comfortable environment for residents. ...
- Duties You will plan work schedules of subordinates and establish priorities on the basis of general work schedules methods and instructions from higher levels of supervision. You will make recommendations concerning training requirements, skills, and qualifications...
$26.11 - $32.24 per hour
If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Bremerton full time Manual Labor Field WA-2, Keyport, WA, US Salary Range: $26.11 To $32.24 Hourly The ...Hourly payFull timeShift workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder. Be the first to apply!


