Overhead Crane Technician
Handling Systems and Conveyors
Overhead Hoist/Crane Technician
HSC is a fast-growing company with immediate openings in the Dallas/Fort Worth for a mid-level to experienced Overhead Hoist/Crane Technician with strong customer focus & the desire to go the extra mile. Field Service Technicians are primarily responsible for inspecting, troubleshooting & repairing overhead crane systems. Familiarity with gear drives, bearings, couplings, wire rope hoist, chain hoist, VFD controls, remote control systems as well as other crane & hoist components.
Candidates must pass drug/alcohol test and extensive background check prior to employment. Additional testing may be required as directed by customer.
Key Responsibilities and Accountabilities:
- Perform scheduled preventive maintenance
- Effectively interface with customer and HSC customer service to communicate maintenance, repairs and upgrades.
- Inspect, evaluate and make professional recommendations of repairs based on industry guidelines (OSHA, CMMA, NEC & ANCI)
- Maintain professional rapport with customer by efficiently responding to breakdowns, troubleshooting issues and completing job within acceptable timeframe.
- Communicate with the customer on the repairs and any recommended preventive maintenance and/or inspection that may be required to monitor the crane system
Required Skills and Knowledge:
- Ability to work under pressure and with deadlines
- Ability to work independently
- Ability to fabricate and weld (certified) is a plus
- Ability to perform inspection to OSHA/ANSI criteria
- Ability to troubleshoot electrical circuits
- Ability to disassemble and reassemble complex equipment
- Ability to read drawings and electrical diagrams
- Must be able to work at heights (20-100+ feet)
- Must follow all safety guidelines
- Maintain confidentiality
- Quality & results driven
- Good driving record
Additional Requirements:
- Must be willing & able to work off shifts and weekends as required by the customer
- Must be able to work overtime as needed by customer
- Must be able to serve "on call" as part of the service office rotation
- Must be able to travel out of town and overnight as needed
- Must be able to frequently lift 25 lbs
- Must be able to occasionally lift 50 lbs
- Position requires frequent climbing, balancing, stooping/crouching & overhead reaching
- Position requires occasional pushing, pulling, kneeling & crawling.
- Position will frequently be exposed to heat, cold, noise and heights
COMPETITIVE PAY
BENEFITS PACKAGE THAT INCLUDES: PROFIT SHARING AND 401k match
Health, Dental and Vision
Paid Holidays
Paid PTO after completing 90 day probationary period
Note-this is not a crane operator position-Service Technicians ONLY
Must be able to pass a criminal background check and drug screening.
Handling Systems and Conveyors- ...Operations Position: Field Service Technician Reports To: Service Manager Employee... ...and repair service for hoist and crane equipment. A field service technician will... ...Duties •Troubleshoot, repair and inspect overhead cranes and hoists, below the hook devices...SuggestedFull timeWork at officeLocal areaMonday to FridayFlexible hoursNight shiftWeekend work
- Handling Systems & Conveyors Manufacture of Overhead Bridge cranes and a Full line of conveyors (Power& Free, Chain, & Slat) HSC was established... ...Worth for an mid-level to experiencedOverhead Hoist/Crane Technician with strong customer focus & the desire to go the extra...SuggestedFull timeWork at officeImmediate startRemote workHome officeShift workNight shiftWeekend work
- ...leading distributor of heavy equipment and cranes in the central United States. We are at... ...KirbySmith family! Crane Field Service Technician/Mechanic Benefits Above-Average... ...twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or...SuggestedTemporary workLocal areaRelocation packageNight shiftWeekend work
- Delta Steel, Inc. seeks an experienced Crane/Industrial Maintenance Mechanic to inspect, maintain, troubleshoot, and repair overhead cranes, hoists, and related equipment. You will follow safety standards and OSHA/compliance guidelines while keeping production downtime...Suggested
- Job Summary The Crane / Industrial Maintenance Mechanic is responsible for the inspection, maintenance, troubleshooting, repair, and installation of overhead cranes, hoists, and industrial production equipment. This position ensures equipment operates safely, efficiently...SuggestedRelocation
- Kirby-Smith Machinery, Inc. in Fort Worth, Texas, is looking for a Crane Field Service Technician/Mechanic to perform in-field repairs on various brands of heavy equipment. The technician will operate a mobile service vehicle, diagnose issues, maintain equipment, and ensure...
- ...leading distributor of heavy equipment and cranes in the central United States. We are at... ...Crusher Heavy Equipment Field Service Technician/Mechanic Benefits * Above-Average Industry... ..., turn, bend, stoop, climb, and reach overhead * Must be able to work in extreme heat...Price workTemporary workLocal areaRelocation packageNight shiftWeekend work
$28 - $35 per hour
...Job Description Job Description INDUSTRIAL MAINTENANCE TECHNICIAN 1st & 2nd Shift in Fort Worth, TX Summary: Performs... ...# Performs preventive maintenance repairs and trouble shoot overhead cranes. # Installing, repairing/replaces worn/defective parts, motors...Day shiftAfternoon shift- A staffing agency in Fort Worth is seeking a Senior Crane Technician responsible for the installation and inspection of cranes. The technician will coordinate activities related to routine inspections and repairs, evaluate and recommend necessary repairs, and ensure safety...
$34.1 per hour
...required Job Duties Perform welding using FCAW, SMAW, and GMAW processes Complete welds in flat, horizontal, vertical, and overhead positions Read and interpret blueprints, drawings, and manufacturing specifications Assemble and weld components according...Hourly payLocal areaShift work1 day per week$30 - $45 per hour
...Senior Industrial Maintenance Technician Location: Fort Worth Position Type: Direct Hire | Full-Time... ...Assist with inspection and maintenance of overhead lifting equipment and hoists Diagnose issues with crane controls, safety devices, and mechanical components...Hourly payFull time$34.1 per hour
...stainless steel, plate, pipe, and structural components. Ability to perform flat, horizontal, vertical, and overhead welds to quality standards. Forklift, crane, tugger, or material-handling equipment experience preferred. Strong safety mindset with knowledge of...Hourly payFor contractorsLocal areaImmediate startShift workWeekend workDay shiftAfternoon shift- ...beams, andfabricated parts in flat, horizontal, vertical, and overhead positions asrequired. • Control distortion through proper weld... ...with drawings and specifications. • Safely operate overhead cranes, forklifts, positioners, and other materialhandling equipment in...Shift work
- ...defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications.Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area.Welds other products in other areas, using...Full timeLive outFlexible hoursShift work
- ...welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE... ...extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions...Local areaFlexible hours
- ...of related experience. Experience with MIG and FCAW is required. FCAW (2G, 3G & 4G). Ability to weld out of position (vertical & overhead). May require working above ground (15 ft or more). Must be able to climb ladders or stairs to reach objects, comfortable with heights...Currently hiringDay shift
- ...Duties and Responsibilities: Operate safety equipment, and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical...Local area
- ...30 - Fort Worth, TX 76135 Position Summary The Welding Technician is responsible for operating appropriate equipment to put together... ...components in various positions (vertical, horizontal, or overhead) Proven experience as a welder Work Environment...Shift workWeekend work
- ...Accountability for completion of daily work assignments while monitoring quality, safety and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures and safety requirements and physically / medically qualified...Hourly payFull timeTemporary workCasual workLocal areaRemote workMonday to FridayMonday to ThursdayDay shiftAfternoon shift
$25 - $28 per hour
...Manually guide electrodes or welding guns along weld lines to achieve precise results. Perform flat, horizontal, vertical, or overhead welding. Apply filler material as needed to complete welds. Finishing, Repair, and Maintenance Inspect welds for size, quality...Hourly payPermanent employmentFull timeTemporary workApprenticeshipWork at officeLocal areaMonday to FridayDay shift- ...fabricated pieces Welds product according to plans and specifications Completes proper documentation. Moves pipe with overhead crane. SECONDARY RESPONSIBILITIES: Assists in the departmental housekeeping and safety efforts and works collaboratively with...Work experience placementWork at officeLong distanceShift workWeekend workAfternoon shift
- ...climate-controlled and physically demanding environments Equipment Experience Required: • Powered Industrial Trucks (PIT) • Overhead cranes • Scissor lifts and aerial lifts • Precision alignment tools and diagnostic equipment Reporting Structure • Reports...Relocation
- ...SkillBridge program. DoD SkillBridge Heavy Equipment Service Technician/Mechanic Potential Compensation and Benefits Above-Average Industry... ...ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and wet, damp,...Temporary workApprenticeshipInternshipLocal areaRelocation package
- ...quality, safety and health regulations.Documentation of all quality reporting methods employed per SEA Quality StandardsOperate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques.Safely and efficiently...Full timeTemporary workCasual workLocal areaRemote workMonday to FridayDay shiftAfternoon shift
$30 per hour
...components as needed.Inspect finished welds visually and with gauges, and complete repairs when required.Handle material safely using overhead cranes, forklifts, and rigging equipment.Maintain equipment, manage flux properly, and keep the work area clean, organized, and safe....Hourly payImmediate startShift work- ...Overview Thermo King of Dallas is Now Hiring a Refrigeration Technician II at 651 Mony St, Fort Worth, TX 76102. Seeking full... ...height of four feet off of the ground. Ability to operate overhead cranes, mobile equipment and motor vehicles as required....Full timeImmediate startShift work
- ...HVAC Technician Primary Purpose: Under general supervision, maintain, repair, and install heating and air conditioning systems and... ...scaffolding, grasping/squeezing, wrist flexion/extension, and overhead reaching; frequent driving Lifting: Heavy lifting and carrying...Immediate startRelocation
- ...Support/Hourly - Position - Technician Job Number 0000764650 Start Date Open Date 05/08/2026 Closing... ..., stooping, lifting, pushing, pulling, bending, reaching overhead and horizontally Occasionally move objects up to 75 pounds;...Hourly payNight shift
- Job Title Work Location: Travel/Nationwide Residency requirement: Based in the DFW area Job Type: Full-time Summary: The Field Service Department is responsible for technical and field support and communications between NGC US and its customers. The main...Full timeContract workWork at officeWeekend work
- ...directed. Tool, Equipment & Material Handling (Continued) Move and position materials manually or with forklifts, hoists, overhead cranes, carts, and approved rigging equipment when trained and authorized. Inspect tools and equipment before use, perform routine...Monday to FridayWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Overhead Crane Technician. Be the first to apply!


