Manufacturing Engineering Technician
Accurus Aerospace Corporation
Manufacturing Engineering Technician
The Manufacturing Engineering Technician will play a critical role in supporting our manufacturing operations across machining, sheet-metal fabrication, and assembly. The ME Tech will focus on documenting processes, assisting in the resolution of technical issues, and collaborating with internal teams and our aerospace customers on quality and technical matters. This is a hands-on, technical role that bridges engineering, production, quality, and customer interface.
This role is identified as requiring ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):
- An individual who is granted U.S. citizenship, or
- An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
- An individual who is granted status as a "protected person"
Essential Functions
- Develop, implement, and optimize manufacturing processes and work instructions to improve repeatability, reduce cycle times, and minimize cost.
- Interpret engineering drawings, 3D models, and specifications to develop accurate build processes.
- Collaborate with machining, fabrication, and assembly teams — including programming, setup, and operator training — to ensure processes are robust and capable.
- Support first article builds and collaborates with engineering to resolve manufacturability issues.
- Drive cost-reduction initiatives through process improvement, material usage optimization, scrap/rework reduction, and efficient tooling design.
- Lead root-cause investigations for manufacturing quality issues (yield losses, scrap, rework, non-conformances) in machining, sheet-metal fabrication, and assembly.
- Work directly with aerospace customers (internal or external) on quality and technical issues: respond to customer Q & NCRs, support customer audits and reviews, lead corrective/preventive actions (CAPAs), ensure customer requirements and specifications are met.
- Participate in continuous improvement programs (Lean, 5S, Six Sigma) and lead small projects to improve process flow, reduce waste, and enhance safety and ergonomics.
- Document and maintain process flows, engineering change notices (ECNs), control plans, FMEAs, inspection plans, and ensure compliance with aerospace quality standards (such as AS9100).
- May design and specify production tooling, fixtures, inspection jigs, and gauges to support manufacturing and quality control.
- May utilize CAD systems (e.g., CATIA or equivalent) to model tooling, fixtures, process layouts, and assist engineering in part design for manufacturability (DFM).
Minimum Qualifications
- 5+ years of experience in aerospace manufacturing, machining, sheet metal fabrication, or mechanical assembly.
- Strong ability to read and interpret engineering drawings, GD&T, and technical specifications.
- Proficiency in Microsoft Office (Word, Excel, PowerPoint); familiarity with Teams/SharePoint is helpful.
- Experience with an ERP/MRP system (Infor Visual, JobBOSS, Epicor, or similar preferred).
- Solid understanding of machining/fabrication processes (milling, grinding, bending, forming, rivet/fasten, assembly) and ability to troubleshoot and optimize those processes.
- Working knowledge of aerospace materials, specifications, and industry standards (AS9100).
- Strong experience with quality and manufacturing improvement methodologies — root-cause analysis (e.g., 8D, 5-Why), lean manufacturing, etc.
- Strong communication skills — able to interface effectively with internal teams (production, quality, engineering) and external customers (quality engineers, technical delegates).
- Ability to work independently, manage small projects, prioritize tasks and deliver improvements in a production environment.
Preferred Qualifications
- Associate's Degree in Engineering or Manufacturing Technology, Drafting/Design, or similar field.
- Hands-on experience with CAD/CAM tools (CATIA, SolidWorks, Mastercam, Vericut, etc.).
- Demonstrated ability to design production tooling, fixtures, inspection jigs/gauges.
- Certification in Lean / Six Sigma (Green Belt or above).
- Experience working with statistical process control (SPC), MSA (Measurement System Analysis), GD&T (Geometric Dimensioning & Tolerancing).
- Experience in customer-facing quality roles (NCR resolution, customer audits, supplier quality interface).
Skills and Attributes
- Strong organizational and project-management skills.
- Comfort working in a dynamic production environment and driving change.
- Collaborative mindset with ability to influence cross-functional teams.
- Detail-oriented, yet able to see the "big picture" of cost, schedule, and quality.
- Proactive, self-starter who is motivated to improve processes and outcomes.
- Ability to accurately read and interpret blueprints, sketches, drawings, work instructions, and technical specifications and other written materials including customer contracts, purchase orders, and terms and conditions
- Professional oral and written communication skills (English)
- Proficiency in the use of Microsoft Office suite including Word, Excel, and PowerPoint; familiarity with Teams/SharePoint is preferred
- Experience using an ERP system; lnfor Visual experience preferred
- Experience using drafting software; Catia VS and/or Vericut experience is preferred
- Familiarity with aerospace materials and specifications and machining practices is preferred
- Understanding of processing/metal finishing requirements and specifications is preferred
- Familiarity with AS9100 requirements is preferred
Physical Demands and Work Environment
- Sit for prolonged periods at a desk and working on a computer
- Regularly stand and walk throughout the facility, including all buildings and the manufacturing areas
- Regularly lift, carry (short-distances), and push/pull up to 25 pounds
- Occasionally climb steps, stairs, or ladders
- Occasionally bend, crawl, stoop, squat, or kneel
- Constantly communicate verbally and in writing (English) using a phone, texts or other messaging, and email
- Use hands and fingers to operate computer keyboards, mouse, or other peripherals
- Occasional travel may be required to customer sites or suppliers
Working Conditions
Work is performed in a combination of locations including offices and the manufacturing shop environment where working conditions vary significantly; the employee will be exposed to :
- Excessive noise (occasionally)
- Dust, smoke, fumes/vapors (occasionally)
- Extreme temperatures (occasionally)
- Hazardous equipment including forklifts, hand tools, cranes or other lifting devices, complex machining centers and other equipment used in a machine shop environment (occasionally)
We appreciate your interest in Accurus Aerospace; however, only those applicants selected for interviews will be contacted. Accurus offers a comprehensive employee benefit package upon completion of 30 days of employment. For full details, please visit the benefits section of our website. Accurus is an Equal Employment Opportunity (EEO) and Affirmative Action Plan (AAP) employer and participates in the E-Verify Employment Verification Program. Please see our website for more information on employment practices. Please note that Accurus only accepts applications submitted through our online recruiting system. For information on disability accommodations for applicants, please visit our career page. All job offers are contingent upon successfully completing a drug screen and criminal background screening. Certain positions may require a Motor Vehicle Report (MVR), a credit report, and/or a medical physical examination.
Thank you for considering Accurus for your next career opportunity.
$70k
...Pay: $70,000+ / Year Manufacturing Engineer The primary function of this position is to provide program/project engineering guidance in the support of developing new manufacturing processes in the manufacturing of bulk cable, wiring harnesses, conduit assemblies...SuggestedWork at officeImmediate start$74.63k - $99.5k
...Manufacturing Engineering Specialist Job Purpose: Maintain accurate manufacturing bills of materials (BOMs), product structures, and process routings in the Case Manufacturing System (CMS). Coordinate new part releases and engineering changes to support production continuity...SuggestedWork at officeFlexible hours- ...APPLICANTS MUST BE US CITIZENS OR PERMANENT RESIDENTS Job Title: Manufacturing Engineer Department: Production Reports to: Manufacturing... .... This involves collaborating closely with the assembly technicians, production supervisor, quality assurance and engineering...SuggestedPermanent employment
- ...Job Description Job Description Position Title: Manufacturing Engineer FLSA Classification: EXEMPT Reports To: Manufacturing Engineering Manager/Dir Engineering JOB DESCRIPTION Summary/Objective: The Manufacturing Engineer will maintain the...SuggestedWork at officeLocal areaShift work
- ...Job Description Job Description Syndeo has a direct hire opening for a Manufacturing Engineer (Full Time, Non-Exempt) for a local client who focuses on parts manufacturing in the aerospace and technology industries. As a Manufacturing Engineer, you will be responsible...SuggestedFull timeWork at officeLocal area
- ...Job Description – Manufacturing Engineer Manufacturing Engineer to support aerospace production non-conformance, shop floor issues, aircraft parts manufacturing, repair implementation, and coordination with engineering and quality teams. Key Responsibilities:...Temporary work
- ...Job Description Job Description Manufacturing Planning Engineer Every airframe skin and bonded structure that leaves this floor depends on a plan that is buildable the first time. This role turns engineering intent into a sequenced, resourced manufacturing plan that...Shift work
$130k - $155k
...thought were your own limits, and help us take flight beyond runways. The Role As Electra's Senior Structural Assembly Manufacturing Engineer, you'll play a key role in developing and industrializing the structural assembly processes for the EL9 aircraft, working...Contract workImmediate startWorldwide- ...feels like home.” THE POSITION… As a Software Certification Engineer , you will provide engineering and technical support in the... ..., as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments...Work at officeLocal areaRemote work
- ...Job Description Job Description In this role, you will be expected to: · Collaborate with the Engineering Expert responsible for the numerical simulation and Lab measurements to support all programs activities requiring advanced simulation models and/or tests in...Temporary work
$22 - $29 per hour
...Job Description Job Description Job Title: Manufacturing Maintenance Technician Employee Type: Full Time, Hourly Pay: $22 - $29 per hour Pay Rate is dependent upon years and level of experience Hours/Shift: 1st Shift (Mon-Fri; 7am-4:30pm), Weekend...Hourly payFull timeWork at officeLocal areaShift workWeekend workDay shift$38 per hour
...Job Description Job Description Job Title: Manufacturing Engineer Job Description \n The Manufacturing Engineer supports production by developing and maintaining manufacturing plans, tooling, and work instructions to ensure product conformance and efficient build...Full timeContract workTemporary workWork at officeMonday to Friday- Job Title: Nuclear Engineer (Naval Reactors Engineer) Category / Component: Officer • Active Overview Design, regulate, and oversee the Navy’s nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear...Contract workApprenticeshipWork at office
- ...Job Description Job Description What are your contributions to the team? · Act as a systems engineer and carry out pneumatics discipline activities · Assure integration and interface management of assigned systems and coordinate with internal groups & suppliers...
$20 - $25 per hour
.... Qualifications • Pursuing an Associate's or Bachelor's degree in Construction Management, Mechanical, Civil or Electrical Engineering or related degree • Must be legally authorized to work without requiring sponsorship for employment to begin or continue employment...Full timeContract workTemporary workFor subcontractorSummer workInternshipSummer internshipWork at officeRelocationWeekend work$15 - $26 per hour
**** Aerospace Processing Technician ** Location: Wichita, KS (Murdock & McLean facilities)** _ Shifts: 1st, 2nd, and 3rd shift... ...instructions precrisely Comfortable working with chemicals and in a manufacturing environment with appropriate PPE Reliable attendance and...Full timeLocal areaShift workNight shiftDay shiftAfternoon shift- ...subsidiary of CSL, a global biopharma company. Plasma collected at CSL Plasma facilities is used by CSL for the sole purpose of manufacturing lifesaving plasma-derived therapies for people in more than 100 countries. The parent company, CSL (ASX:CSL; USOTC:CSLLY), headquartered...Part timeImmediate start
$19.57 - $27.81 per hour
...of new and existing construction.Key ResponsibilitiesPerforms engineering test validations to determine the performance, reliability,... ...make recommendations that contribute to the engineering and manufacturing objectives for specific products.Experience RequiredCandidates...Full timePart timeSummer workInternshipFlexible hours- Chi siamoInnovazione. Sostenibilità. Produttività. È così che stiamo aprendo nuove strade nella nostra missione di promuovere in modo sostenibile il lavoro di agricoltori e costruttori in tutto il mondo. Con una popolazione globale in crescita e una crescente pressione ...
- ...Job Description Job Description JOB DESCRIPTION Job Title: Test Engineer Level 2 F LSA Status: Exempt Job Code...Contract workWork at officeImmediate start
- ...work to fabricate, assemble and inspect hardware to planning, engineering and quality control requirements; on where applicable. Duties... ..., QMS). Support the continuous flow of product within the manufacturing process by training and assisting employees of the same or lower...Shift workWeekend workAfternoon shift
- ...Job Description Job Description JOB DESCRIPTION Job Title: Test Engineer Level 1 FLSA Status: Exempt Job Code: 12660Date Created: 03/11/2020 Reports To: Manager/Director of...Contract workWork at office
- Job Description Job Description Description: \tPerform fabrication support activities including, e.g., masking hardware for subsequent processing, loading/unloading/hanging hardware for chemical applications, deburr, hand finishing, light hand forming, hand drilling...Shift workWeekend workAfternoon shift
$90k - $120k
...be a part of something special while achieving their career goals. We offer competitive compensation as a smaller company in addition to an attractive benefits package for qualified employees. Manufacturing Engineering Director Salary : $90,000 - $120,000...$90k - $120k
...competitive compensation as a smaller company in addition to an attractive benefits package for qualified employees. Manufacturing Engineering Director Salary : $90,000 - $120,000 Experience: 8+ years in Manufacturing Engineering discipline in Aerospace...Work at officeMonday to Friday$28 - $30 per hour
...Job Description Job Description The Industrial Controls Technician supports the design, fabrication, installation, startup,... ...automation components. The technician works closely with engineering, manufacturing personnel, customers, and outside vendors to turn machine...Hourly payFor contractors$22.52 per hour
...Airplanes, one of Boeing's three business units and the premier manufacturer of commercial jetliners for decades. Spirit Commercial's core... ...to fabricate, assemble and inspect hardware to planning, engineering and quality control requirements The Company will provide...Flexible hoursShift work- ...repair many forms of equipment in our manufacturing facility. Harness your skills along with... ...2+ years' experience as a maintenance technician in a manufacturing environment.Able to... ...following:Equipment design and basic engineering capabilities that can be translated...Work experience placementAll shiftsRotating shiftAfternoon shift
- ...collaborative team environment · Dedication to safety through our Zero Harm policy Job Description Job Summary The Manufacturing Automation Engineering Lead drives the development, implementation, and continuous improvement of automation systems within manufacturing...For contractorsWork at officeLocal area
- ...Job Description Job Description Principal Test Engineer JOB DESCRIPTION Job Title: Principal Test Engineer Job Code: 12663 Reports To: Manager/Director of Engineering Department Name...Work at officeRelocation
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Manufacturing Engineering Technician. Be the first to apply!
- manufacturing engineer specialist Wichita, KS
- manufacturing engineering tech Wichita, KS
- manufacturing technology engineer Wichita, KS
- manufacturing engineer Wichita, KS
- design technologist Wichita, KS
- technical designer Wichita, KS
- engineering operations technician Wichita, KS
- reliability maintenance engineering technician Wichita, KS
- engineering technician Wichita, KS
- senior accountant manufacturing Wichita, KS








