Quality Technician II
$27 - $30 per hourOKSI
Job Type
Full-time
The Quality Technician II independently performs established receiving, in-process, and final inspections of mechanical parts, electronics, and electromechanical assemblies. This role interprets inspection requirements, selects suitable approved tools, investigates discrepancies, and maintains complete quality records. The technician supports first article inspections, corrective actions, and training of entry-level technicians while escalating engineering decisions and unclear acceptance criteria. Key Responsibilities
- Independent Inspection: Inspect parts and assemblies against approved drawings, specifications, and plans, including dimensional requirements and GD&T within demonstrated competence. Perform prescribed electrical and functional tests and document objective evidence of conformity.
- Receiving and Supplier Documentation: Review certificates, material or process records, and inspection results against purchase order requirements. Verify identification, revision, and lot or serial traceability. Identify documentation gaps and coordinate follow-up through Quality and Purchasing.
- Inspection Setup and Measurement: Select suitable approved measurement tools and set up established inspections. Verify calibration status and investigate inconsistent readings. Recommend method or fixture improvements to the Quality Manufacturing Engineer for review and approval.
- Nonconformance and Investigation: Initiate NCRs in the Odoo Quality module with measurements, photographs, and affected material details. Coordinate assigned containment, support root cause investigations, and reinspect after authorized rework. Maintain hold controls until an authorized disposition or release is recorded.
- First Article and Release Support: Collect first article measurements and verify inspection record completeness. Check product configuration and traceability before acceptance. Record acceptance only within delegated authority and escalate missing evidence or unmet release requirements.
- Digital Records and Product Protection: Maintain inspection evidence in the Odoo Quality module, linked to Odoo Inventory and Manufacturing records. Use current instructions from SharePoint GCC High. Apply ESD, FOD, cleanliness, preservation, and controlled-information requirements throughout the work.
- Training and Improvement: Help train Level I technicians on approved methods. Identify recurring defects and inspection problems, support controlled trials of improvements, and propose instruction changes without independently altering requirements.
- Ability to interpret drawings, tolerances, applicable GD&T, specifications, and basic assembly or electrical documentation.
- Proficiency with dimensional tools, microscopes, and prescribed electrical tests appropriate to assigned products.
- Working knowledge of traceability, calibration checks, nonconformance control, and inspection records.
- Ability to investigate discrepancies, distinguish measurement problems from product defects, and explain findings clearly.
- Ability to prioritize inspection work and mentor entry-level technicians while escalating technical uncertainty.
- High school diploma or equivalent. An associate degree or technical training in manufacturing, mechanical technology, electronics, or a related field is preferred.
- 2-4 years of relevant quality inspection or manufacturing experience, with demonstrated ability to perform assigned inspections independently. Relevant technical training may support placement based on demonstrated competence.
- Experience inspecting aerospace or defense hardware, precision machined parts, electronics, or electromechanical assemblies.
- Experience supporting first article inspection, corrective actions, and ERP quality records, preferably Odoo.
Salary Description
$27 - $30
Vacancy posted 4 days ago
Similar jobs that could be interesting for youBased on the Quality Technician II in Torrance, CA vacancy
$22.85 - $24.57 per hour
...Quality Control Technician IIThe Quality Control Technician II plays a key role in ensuring that food products consistently meet internal quality expectations and regulatory food safety standards. This position focuses on routine monitoring, inspections, and data collection...SuggestedContract workTemporary workFlexible hoursEarly shift$110k - $140k
...Development Test Engineer II Department: Assembly, Integration & Test Employment Type: Full Time Location: Redondo Beach Compensation: $110,000 - $140,000 / year Description The Development Test Engineer II at Impulse , will lead the planning...SuggestedPermanent employmentFull timeFlexible hours$21 - $22 per hour
...General Maintenance Engineer II Located along King Harbor in Redondo Beach, The Redondo Beach Hotel, Tapestry Collection by Hilton offers a relaxed coastal stay with marina views and easy access to the South Bay's beaches, restaurants, and waterfront attractions. The...SuggestedHourly payFull timeFor contractorsFlexible hoursShift work- ...testing, managing the company's ESD control plan, and supporting quality assurance audits. Qualified candidates must have at least two... ...: Maintains an active ASQ CCT (Certified Calibration Technician) Certification Basic soldering skills. Experience with vibration...SuggestedFull time
$24 - $29.5 per hour
...Availability None Export-Controlled Data No Currency Code US Dollar Quality Tech Lab - In Process Lab Performs metallurgical and/or... ...as necessary. Provides technical guidance for laboratory technicians less familiar with equipment and procedures. Tests samples of...SuggestedPermanent employmentFull timeRemote workDay shift- Labcorp in Torrance, CA is seeking a Cytogenetics Technologist II to join our team. This role focuses on Fluorescence In Situ Hybridization (FISH) testing and analysis, including wet-lab procedures and interpretation for hematologic and FFPE specimens. Key responsibilities...
- Revenue Cycle Specialist II (Physician Billing) Job Description Align yourself with an organization that has a reputation for excellence... ...’s Consumer Choice Award 19 times for providing the highest-quality medical care in Los Angeles. We also were awarded the Advisory...Remote work
$23 - $25 per hour
...Production Technician II Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply... ...to perform the functions of the job Be able to verify quality of work, regarding, quality, assembly, solder, and lighting. Perform...Hourly pay- Cedars-Sinai Medical Center in Torrance, California, is seeking a Revenue Cycle Specialist II (Physician Billing) to provide billing and collections support. This role requires a minimum of three years experience in physician billing and an ability to handle multiple tasks...Remote job
$39 - $55 per hour
...Robotics Assembly Technician Torrance, California, United States Divergent is building... ..., and helps drive production efficiency, quality, and safety on the shop floor. This role... ...our interview process. Technician II / T02: $39.00 - $48.00 Technician III...Temporary workCasual workWork at officeImmediate startShift work$122.6k - $228.88k
...set up the assembly kits that enables our technicians to put together our Electron rockets,... ...SENIOR SUPPLIER DEVELOPMENT ENGINEER I/II – MECHANICAL Based out of Rocket Lab's... ...design, manufacturing, procurement, and quality. They are the ultimate internal advocate...Permanent employmentLocal areaFlexible hours$135k - $215k
...material development effortsGuide and mentor project specialists and technicians in executing formulation, testing, and process development... ..., applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii)...Permanent employmentTemporary work$80.75k - $150k
...Job Description Job Description Recruiting for Level I, II, or III Salary Range: $80,750 - $150,000/year Location: Paramount... ..., including training affected personnel and documenting in Quality Work Instructions Accountable for the Change Management System...Permanent employment$28 - $32 per hour
...Quality Control TechnicianThe Quality Control Technician is responsible for conducting in-process and final inspections of mechanical, electrical, and electromechanical components and assemblies. This role involves interpreting blueprints, verifying hardware conformity...Daily paidContract workTemporary workFlexible hours$28 - $32 per hour
...Quality Control TechnicianInspect. Measure. Improve.Join an innovative defense tech company as a Quality Control Technician! You'll ensure mechanical, electrical, and electromechanical components meet the highest quality standards through inspections, testing, and precision...Weekly payContract workTemporary work- ...Job Summary We are seeking a diligent and detail-oriented QC (Quality Control) Technician to join our team. The QC Technician will be responsible for ensuring compliance with established quality standards and performing various quality control tests and inspections on...Full timeLocal areaImmediate startAfternoon shift
$30 - $36 per hour
...Quality TechnicianMagnetic Component Engineering ("MCE"), a subsidiary of Dexter Magnetic Technologies ("Dexter"), manufactures permanent... ...one 48,000 square foot facility with 85 employees.The Quality Technician is responsible for performing advanced dimensional inspection,...Permanent employmentTemporary workFlexible hours- ...The Fountain Group is currently seeking a Quality Technician for a prominent client of ours. This position is located in Torrance, CA . Details for the position are as follows: Job Description Perform routine product testing, processing, and evaluation using...Work experience placement
- ...Time. Right Place. Right Price. Title-Distribution Specialist - II Location-El Segundo, California, USA, 90245 Duration- 10... ...material kitting and deliveries, and ensures compliance with safety, quality, and regulatory requirements. The position works closely with...Contract workShift work
$38.4 - $57.6 per hour
...advanced composites, the team works at the intersection of innovation and execution, balancing performance and reliability with cost, quality, and schedule. As we move toward first flight and beyond, the challenges become more exciting, offering opportunities to shape how...$82k - $113k
...the pulse of the space industry and are driven to deliver results for our customers and our business. BUSINESS DEVELOPMENT ENGINEER II Based at Rocket Lab's global headquarters in Long Beach, CA, the HASTE Business Development & Strategy Engineer is an early-...Permanent employmentInternshipLocal areaFlexible hours$25 - $32 per hour
...Quality Control Technician $25-32/hr Job Description The Quality Control Technician is responsible for conducting in-process and final inspections of mechanical, electrical, and electromechanical components and assemblies. This role involves interpreting blueprints...Weekly payDaily paidContract workTemporary workFlexible hours$32 - $44 per hour
Job Title Location: Torrance, CA (On-site) Pay: $32–$44/hour (depending on experience) Schedule: Full-time, 40 hours/week Type: Temp-to-hire Job Description Perform incoming inspections of raw materials, electronic components, and cable […]Full timeTemporary work$100.8k - $151.2k
...in Long Beach, CA, the Mechanical Development & Test Engineer II is responsible for leading and executing test campaigns for satellite... ...testing.Mentor and provide guidance to junior engineers and technicians.Contribute to the development and improvement of test processes...Permanent employmentLocal areaFlexible hours$141.8k - $236.2k
...Long Beach, CA, theSenior Mechanical Development & Test Engineer II is responsible for the end-to-end design, build, test, and... ...automation and data analysis.Experience leading teams of engineers and technicians. This position may require prolonged periods of sitting,...Permanent employmentLocal areaFlexible hours$25.8 - $38.7 per hour
...and execution, balancing performance and reliability with cost, quality, and schedule. As we move toward first flight and beyond, the... ...issues when needed Work with engineers and other technicians to coordinate testing priorities and schedules Support training...- ...Job Description Job Description POSITION SUMMARY The Quality Management Coordinator I/II manages health plan gap reports and supports the Quality team in closing care gaps and improving STARs quality outcomes. The Coordinator I focuses on gap analysis and supplemental...Flexible hours
- ...requirements of the law.ITAR REQUIREMENTS:To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158,...Permanent employmentTemporary workInternshipWeekend work
$135k - $215k
...requirementsCollaborate with other engineers, subject matter experts, and technicians to solve complex material and processing challenges on our... ..., applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii)...Permanent employmentTemporary workWork experience placement$22 - $28 per hour
...Job Description Job Description JOB TITLE: Quality Control Technician LOCATION: Hawthorne, NY (on-site) TYPE : Full time, regular COMPENSATION: $22.00/hr - $28.00/hr Clarapath is a medical robotics company based in Westchester County, NY, dedicated to...Full timeWork at officeLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Technician II. Be the first to apply!
Related searches
- supplier quality Torrance, CA
- quality assurance quality control engineer Torrance, CA
- rn quality Torrance, CA
- quality Torrance, CA
- quality manufacturing Torrance, CA
- quality inspection Torrance, CA
- quality equipment Torrance, CA
- quality improvement rn Torrance, CA
- quality intern Torrance, CA
- quality lead Torrance, CA




