General Technician
Amcor plc
Job Description Receive product from Press, stack, and place on pallets. • Understand basic operation of Hugo Beck Bundling System, including, but
not limited to set-up, troubleshoot, basics, webbing, trash in knife, roll alignment, tightening or loosening bundles.
• Pull product from press, stack and place through bundling machines retrieving bundled product and place on pallets.
• Printing pallet labels with Pecas. Be able to find all information needed on job bag and set up sheet.
• Ensure correct loading of product through bundling machine and correct loading onto pallets for Material handling.
Ensure quality of jobs completed by reviewing for quality and accuracy. Makes sure jobs are complete and error free. Informs Operators of any problems.
• Ensures finished product appears to be of highest quality, accurately printed and completed and free of errors.
• Pull Product samples according to company procedures and send to Quality Auditors as required.
• Notifies Operator immediately of any problems and/or errors.
Downtime
• Webbing the press.
• Assist Operators when the press is down.
• Blow out the Hugo Beck.
• Clean up press area, i.e., mopping all areas, walls, tables, cans, tanks, floors behind press and units.
Ensure correct set-up and breakdown of doctor blades using established instructions and procedures.
• Properly remove/dispose of used doctor blades using all safety procedures.
• After removal of used blades from press, dispose in safety container for used blades.
• Clean backup blade using correct water, solvent, or lacquer.
• Deliver blade assembly to proper area in Pre-Make Department.
• Set up new doctor blades according to policies and procedures ensuring all measurements are correct and blade is in proper position.
Make-Ready
• Ensure all product is purged from stacker, tables, and Hugo Beck.
• Assist in changing impression rollers or change over stacker.
• Assist in putting tools in press, changing tab breaker section, tear down, and put pump together, separate the different sections of the press from tab breaker section to cutter.
• Change cylinders, pump out inks, fill solvent containers.
• Remove and/or install print unit cassettes.
Maintains and follows all company policies and procedures for OHSE, personal protection, and hazard materials/waste handling according to established guidelines.
• Ensures consistent use of appropriate personal protective equipment while in designated areas and while performing specific tasks requiring the use of PPE.
• Follows established procedures and guidelines for the handling and disposal of all hazardous materials/waste.
• Maintains and wears proper uniform according to company policies.
• Use Company provided safety lifting equipment, i.e., hoist, jacks, vacuum manipulators, etc.
• On a regular basis, examines work areas to keep it in a safe and neat condition, including but not limited to proper grounding, cleanup ink, and solvent containers.
• Properly stores and arranges work area to maintain cleanliness and safe environment following all safety rules and regulations for grounding, storage, spill clean-up, etc.
• Effectively demonstrates the ability to maintain work area in a safe and proper working order including but not limited to cleaning press area, mopping floors, emptying rag bins, blade receptacles, and trashcans.
Gluer GT (if applicable)
• Perform a variety of tasks such as feeding product into the folder/gluer, packing and palletizing.
• Print pallet labels with Pecas. Be able to find all information needed on job docket and set up sheet. Forklift Driver (if applicable)
Maintain and support press operation through safe and effective material handling. Safe and correct operation and maintenance of forklift vehicles to ensure proper material handling and forklift operation. Loading and unloading of pallets, waste and recording and weighing of recyclable material.
• Maintain bi-annual certification of correct procedures and operation of lift equipment.
• Use lift truck to move loads of raw materials, in-process stock, or finished goods throughout the facility.
• Spot check load for correct labels and codes, and neatness. Place loads in designated area of warehouse.
• Provide support to Press, i.e., check schedule board for upcoming jobs, check to make sure press has sufficient materials
• Remove waste containers, and changing over full containers to always maintain empty container at press.
• Remove waste and cores from press, weigh and put on trucks for recycling. Supply corrugate, pallets and bundler film at delivery end of press. Make sure all material is in designated areas. Remove finished loads of product from delivery end of press.
• Ensure proper installation of battery charging equipment and battery replacement according to company policies and procedures. Batteries must be charged outside the lift truck.
• Complete all necessary paperwork as required including a daily lift truck inspection form.
• Always operate all equipment in a safe manner to ensure no damage to Company property or customer product.
• Report all accidents, injuries, and near misses.
Actively participates as a member of Press Crew to meet production and team goals. Interacts with operators, co-workers and all staff in a way that promotes respect, encourages cooperation, and contributes to excellent performance.
• As an integral member of a Press Crew, works effectively with other employees.
• Communicates accurate information to all team members in a professional, respectful, and courteous manner.
• Exhibits a willingness to assist or help in getting work completed, for example, relieving for breaks, assist on other machines when required, all other tasks that may be required or requested by operators, shift leads, department leads or management.
• Must be very dependable in attendance and punctuality
Must be able to perform all work or additional tasks as required or requested by Department Leads, Shift Leads, Operators or Management.
Requirements:
• High School diploma (or GED), one to three years related production experience and/or training: or equivalent combination of education and experience. Must have very good mechanical and physical ability.
• Lift truck operators must have and maintain safety training for operation of all company equipment.
Physical Demands:
• Must be ability to lift to 60 lbs is required.
• This position may require prolonged periods of standing, stooping, bending and/or reaching, balancing, climbing, kneeling, crouching, reaching with hands and arms, hearing, and speaking.
• Must be able to hold, touch, feel and manipulate with hands product and equipment in a safe manner. Manual dexterity is required.
• Use of close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to rotate shifts as required and be available to work more than 8 hours per day and/or 40 hours per week when necessary to meet customer product needs. Our Expectations We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when:
not limited to set-up, troubleshoot, basics, webbing, trash in knife, roll alignment, tightening or loosening bundles.
• Pull product from press, stack and place through bundling machines retrieving bundled product and place on pallets.
• Printing pallet labels with Pecas. Be able to find all information needed on job bag and set up sheet.
• Ensure correct loading of product through bundling machine and correct loading onto pallets for Material handling.
Ensure quality of jobs completed by reviewing for quality and accuracy. Makes sure jobs are complete and error free. Informs Operators of any problems.
• Ensures finished product appears to be of highest quality, accurately printed and completed and free of errors.
• Pull Product samples according to company procedures and send to Quality Auditors as required.
• Notifies Operator immediately of any problems and/or errors.
Downtime
• Webbing the press.
• Assist Operators when the press is down.
• Blow out the Hugo Beck.
• Clean up press area, i.e., mopping all areas, walls, tables, cans, tanks, floors behind press and units.
Ensure correct set-up and breakdown of doctor blades using established instructions and procedures.
• Properly remove/dispose of used doctor blades using all safety procedures.
• After removal of used blades from press, dispose in safety container for used blades.
• Clean backup blade using correct water, solvent, or lacquer.
• Deliver blade assembly to proper area in Pre-Make Department.
• Set up new doctor blades according to policies and procedures ensuring all measurements are correct and blade is in proper position.
Make-Ready
• Ensure all product is purged from stacker, tables, and Hugo Beck.
• Assist in changing impression rollers or change over stacker.
• Assist in putting tools in press, changing tab breaker section, tear down, and put pump together, separate the different sections of the press from tab breaker section to cutter.
• Change cylinders, pump out inks, fill solvent containers.
• Remove and/or install print unit cassettes.
Maintains and follows all company policies and procedures for OHSE, personal protection, and hazard materials/waste handling according to established guidelines.
• Ensures consistent use of appropriate personal protective equipment while in designated areas and while performing specific tasks requiring the use of PPE.
• Follows established procedures and guidelines for the handling and disposal of all hazardous materials/waste.
• Maintains and wears proper uniform according to company policies.
• Use Company provided safety lifting equipment, i.e., hoist, jacks, vacuum manipulators, etc.
• On a regular basis, examines work areas to keep it in a safe and neat condition, including but not limited to proper grounding, cleanup ink, and solvent containers.
• Properly stores and arranges work area to maintain cleanliness and safe environment following all safety rules and regulations for grounding, storage, spill clean-up, etc.
• Effectively demonstrates the ability to maintain work area in a safe and proper working order including but not limited to cleaning press area, mopping floors, emptying rag bins, blade receptacles, and trashcans.
Gluer GT (if applicable)
• Perform a variety of tasks such as feeding product into the folder/gluer, packing and palletizing.
• Print pallet labels with Pecas. Be able to find all information needed on job docket and set up sheet. Forklift Driver (if applicable)
Maintain and support press operation through safe and effective material handling. Safe and correct operation and maintenance of forklift vehicles to ensure proper material handling and forklift operation. Loading and unloading of pallets, waste and recording and weighing of recyclable material.
• Maintain bi-annual certification of correct procedures and operation of lift equipment.
• Use lift truck to move loads of raw materials, in-process stock, or finished goods throughout the facility.
• Spot check load for correct labels and codes, and neatness. Place loads in designated area of warehouse.
• Provide support to Press, i.e., check schedule board for upcoming jobs, check to make sure press has sufficient materials
• Remove waste containers, and changing over full containers to always maintain empty container at press.
• Remove waste and cores from press, weigh and put on trucks for recycling. Supply corrugate, pallets and bundler film at delivery end of press. Make sure all material is in designated areas. Remove finished loads of product from delivery end of press.
• Ensure proper installation of battery charging equipment and battery replacement according to company policies and procedures. Batteries must be charged outside the lift truck.
• Complete all necessary paperwork as required including a daily lift truck inspection form.
• Always operate all equipment in a safe manner to ensure no damage to Company property or customer product.
• Report all accidents, injuries, and near misses.
Actively participates as a member of Press Crew to meet production and team goals. Interacts with operators, co-workers and all staff in a way that promotes respect, encourages cooperation, and contributes to excellent performance.
• As an integral member of a Press Crew, works effectively with other employees.
• Communicates accurate information to all team members in a professional, respectful, and courteous manner.
• Exhibits a willingness to assist or help in getting work completed, for example, relieving for breaks, assist on other machines when required, all other tasks that may be required or requested by operators, shift leads, department leads or management.
• Must be very dependable in attendance and punctuality
Must be able to perform all work or additional tasks as required or requested by Department Leads, Shift Leads, Operators or Management.
Requirements:
• High School diploma (or GED), one to three years related production experience and/or training: or equivalent combination of education and experience. Must have very good mechanical and physical ability.
• Lift truck operators must have and maintain safety training for operation of all company equipment.
Physical Demands:
• Must be ability to lift to 60 lbs is required.
• This position may require prolonged periods of standing, stooping, bending and/or reaching, balancing, climbing, kneeling, crouching, reaching with hands and arms, hearing, and speaking.
• Must be able to hold, touch, feel and manipulate with hands product and equipment in a safe manner. Manual dexterity is required.
• Use of close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to rotate shifts as required and be available to work more than 8 hours per day and/or 40 hours per week when necessary to meet customer product needs. Our Expectations We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when:
- Our people are engaged and developing as part of a high-performing Amcor team
- Our customers grow and prosper from Amcor's quality, service, and innovation
- Our investors benefit from Amcor's consistent growth and superior returns
- The environment is better off because of Amcor's leadership and products
- Medical, dental and vision plans
- Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location
- Company-paid holidays starting at 8 days per year and may vary by location
- Wellbeing programs & Employee Assistance Program
- Health Savings Account/Flexible Spending Account
- Life insurance, AD&D, short-term & long-term disability, and voluntary benefits
- Paid Parental Leave
- Retirement Savings Plan with company match
- Tuition Reimbursement (dependent upon approval)
- Discretionary bonus program (initial eligibility dependent upon hire date)
Vacancy posted 5 days ago
Similar jobs that could be interesting for youBased on the General Technician in Peachtree City, GA vacancy
- ...Job Description Job Description Crossroads Automotive is looking for a dependable, full time General Service Technician. Must have valid Georgia drivers license and dependable transportation. This is a fast paced environment that runs on integrity, so experience...SuggestedFull timeMonday to FridayFlexible hours
- ...us for years, and we are committed to continual improvement and ongoing training, including out‑of‑state opportunities. General Service Technician SS01K Hourly or flat rate. Full or part‑time positions available. What We Offer Competitive hourly pay Medical, Dental...SuggestedHourly payPrice workFull timePart timeNight shiftWeekend workAfternoon shift
$10 - $18 per hour
...General Service Technician SS01K Hourly or Flat Rate Full or Part Time Pay: $10 - 18 Join the Precision Tune Auto Care Team! What started as a small tune-up shop in Beaumont, TX in 1976 has grown into a trusted name with more than 320 service centers across...SuggestedHourly payPrice workFull timePart timeNight shiftWeekend workAfternoon shift- ...Description Job Description Summary Functions: Field Service Technicians provide remarkable customer service by traveling to customer... ...updates to the customer and management of Metalforming. General Responsibilities Fill out detailed Service Reports and turn...SuggestedDay shiftAfternoon shift
- ...enable individuals with disabilities to perform the essential functions. Education and/or experience ~ High school diploma or general education degree (GED). A two-year degree or training in electronic technology or equivalent experience is preferred. Required...SuggestedWork at office
- Peachtree City, GA Full time REQ_91276 Job Description The role of this person is full commitment to excellence in OHSE and Quality. The goal is to protect and promote the environment, health and safety of all employees and the community in which we operate....Hourly payFull timeTemporary workWorldwideFlexible hours
$600 - $800 per week
...big move starts here—don't wait, apply today and drive your success forward! We are seeking a skilled and dedicated General Tire and Lube Technician to join our team. As a leading automotive service provider, we take pride in delivering exceptional customer service and...Weekly payPart time- ...Job Description Job Description General Service Technician SS01K Hourly or Flat Rate Full or Part Time Join the Precision Tune Auto Care Team! We are a locally owned business with a tight-knit, highly trained team that takes pride in delivering top-notch...Hourly payPrice workFull timePart timeNight shiftWeekend workAfternoon shift
$50k
...Maintenance Technician Atrium Management Company is a fully integrated real estate platform. Based in Orlando, FL, we manage 11,000... ...supplies and parts within budgetary guidelines Perform all general and routine maintenance in the community Ensure that all keys...Temporary workLocal areaFlexible hours- ...unit, elevators, fire and sprinkler equipment, generator, landscape, kitchen equipment, and emergency pull cord equipment ~ Perform general and preventive maintenance projects as scheduled or assigned ~ Respond promptly to resident’s maintenance requests ~ Ensure...Full timeWork experience placementLocal areaImmediate start
- ...Maintenance Technician Arcan Capital is committed to providing an exceptional living experience for our residents by ensuring well-... ...apartments, which may include painting, carpet repairs, cleaning, general repairs, housekeeping duties, and any necessary duties to...Local areaFlexible hours
- ...Residential is hiring! We are looking for an entry-level Maintenance Technician to join our team at the Retreat at Peachtree City Apartments... ..., but are not limited to, plumbing, electrical work, and general carpentry work related to household, building, and property grounds...Afternoon shift
- Summary Performs, processes, and supports Production Operations in various areas of the Plant such as Press Room, Roll Stand Tasks, Hugo Beck Operation, Folder/Gluer, Die Cutter, and/or Material Handling. The role demonstrates full commitment to excellence in OHSE and Quality...Hourly payFull timeTemporary workImmediate startWorldwideFlexible hoursShift workRotating shift
- ...Multi Craft Maintenance Technician Major and established company with a huge majority market share in what they manufacture and a good... .... Education/Experience: High school diploma or general education degree (GED), two to four years related experience and...Hourly payNight shift
$25 - $30 per hour
...Maintenance Technician At Hoshizaki, our people drive our success, and our core values of Transparency, Compliance, Trust, and Collaboration... ...and wellness programs. This job description outlines the general nature of the role and is not a comprehensive list of duties...Hourly payFlexible hoursShift workNight shift$25 - $30 per hour
...OverviewSalary Range $25.00 - $30.00 HourlyDescriptionField Service Technician Description:The field service technician performs different... ...on preventive maintenance and safety regulations, and provide general customer service on the phone and in person.Perform other...Night shift- ...Doctor of Medicine | Internal Medicine - General/Other Location: Tyrone, GA Employer: CompHealth Pay: Competitive weekly pay (inquire for details) Shift Information: Days - 5 days Start Date: ASAP About the Position Come practice in Tyrone...Weekly payFull timeContract workImmediate startRelocation packageFlexible hoursShift work
- ...Technicians This position performs technical duties in the maintenance of City facilities and grounds. Essential Functions Performs... ...of grounds maintenance and repair principles, including general knowledge of plumbing, electrical, irrigation, and mechanical...ApprenticeshipInternshipWeekend work
- GENERAL LABORER/ WATER DAMAGE TECHNICIAN Dry Force Corp Newnan, Georgia, United States About this position About SerClean At Serclean, we specialize in water mitigation services, providing expert solutions to help our clients recover swiftly from unexpected water-related...ApprenticeshipLocal area
- ...Competitive Base Pay Employee Discounts SUMMARY An Optometric Technician is a valuable asset to an optometrist as they assist in providing... ...of employees in a courteous, professional manner at all time General office duties and cleaning to be assigned by manager...Full timeWork at office
- ...high-quality living experience for our residents. As an HVAC Technician, you will be responsible for maintaining and repairing heating... ...communicating with residents, resolving HVAC concerns, and assisting with general maintenance or on-call duties as needed.Qualifications &...
$50k - $175k
...thing while challenging the status quo. Your Role as a Service Technician As a Service Technician at Tire Discounters, you'll perform... .... Career Path: Service Technician ? Service Manager ? General Manager Why Join Tire Discounters? Grow with us: Defined...Hourly payWeekly pay$17.5 - $26.3 per hour
...we need. Job Category Retail Position Summary The Automotive Technician plays a pivotal role within our automotive service team. As a... ...drive customer and company vehicles. Basic understanding of general automotive maintenance & tire repair services including: Oil...Daily paidMinimum wagePrice workFull timeTemporary workPart timeLocal areaFlexible hours$17.5 - $26.3 per hour
...we need. Job Category Retail Position Summary The Automotive Technician plays a pivotal role within our automotive service team. As a... ...to drive customer and company vehicles. Basic understanding of general automotive maintenance & tire repair services including: Oil changes...Daily paidMinimum wagePrice workFull timeTemporary workPart timeLocal areaFlexible hours- ...Job Description Job Description Title: Field Service Technician - Press Brake Location: Peachtree City GA (Relocation Available) Full Time / Direct Hire First Year Training | Up to 95% North America Travel Thereafter Description: · Build...Full timeRelocationRelocation package
$32 - $38 per hour
Senior Maintenance Technician: Independence & Early Fridays Tired of micromanagement? We’re looking for a seasoned Industrial Maintenance... ...Ownership: Maintain a neat, organized shop and handle general facility needs as they arise. Requirements Expertise:...Permanent employmentTemporary workFor contractorsWork experience placementShift workDay shift- ...Job Description Job Description Automotive Technician/ General Line Technician Newnan Peachtree Chrysler Dodge Jeep Ram is looking for Automotive Technicians/ Auto Mechanics to join their industry leading Service Team! Enjoy excellent pay and performance incentives...
- ...Service Technician CIDAN Machinery Group is a global leader in the sheet metal machinery industry, with a strategy of being a one-stop-partner for many sheet metal fabricators. When it comes to bending, rolling, cutting, and forming metal we have the technology, innovation...Temporary workMonday to FridayFlexible hours
- ...Megadoors Technician Perform inspections, repairs and upgrades on Megadoors and other large industrial doors located in the United States. Essential Duties And Responsibilities Perform PM inspections, repairs, modifications and upgrades on vertical lifting fabric...Monday to FridayFlexible hours
- Select how often (in days) to receive an alert: Create Alert Perform inspections, repairs and upgrades on Megadoors and other large industrial doors located in the United States. ESSENTIAL DUTIES AND RESPONSIBILITIES Perform PM inspections, repairs, modifications and upgrades...Monday to FridayFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to General Technician. Be the first to apply!
Related searches
- senior operations technician Peachtree City, GA
- eligibility technician Peachtree City, GA
- coating technician Peachtree City, GA
- compliance technician Peachtree City, GA
- program technician Peachtree City, GA
- er technician Peachtree City, GA
- control systems technician Peachtree City, GA
- technician Peachtree City, GA
- airport technician Peachtree City, GA
- customer care technician Peachtree City, GA




