Saw Operator
Wisconsin Steel & Tube Corp
Warehouse Material Handler
Moves, stocks, saws, cuts, and stages material within the warehouse.
Responsibilities & Duties:
- Sets up and operates cut-off machines to cut, slot, groove, miter, and trim steel according to specification.
- Selects and installs blade on machine, using hand tools.
- Sets controls to adjust speed, feed rate, and blade tensions.
- Positions guides, stops, holding blocks, or other fixtures to secure and direct steel, using hand tools and measuring devices.
- Mounts steel in holding device, manually or using overhead crane.
- Reads job order and blueprint for specifications.
- Inspects material for quality standards by measuring cut stock with ruler, caliper, or square to verify dimensions against specifications.
- Operates material handling equipment and stages vehicles to assist in the movement of materials to and from the Saw Department.
- Performs daily preventative maintenance inspections as required.
- Follows safety regulations and company work rules for a safe working environment.
- Maintains a clean working area both during and after the scheduled shift.
This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time.
Requirements:
Education and/or Experience: High School Diploma or equivalent preferred, one to three years' relevant experience, or equivalent combination of both preferred.
Essential Functions:
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to effectively present information in one-on-one and situations to other employees of the organization.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to critically think and solve problems.
- Ability to deal with problems involving several concrete variables in standardized situations.
- Requires the ability to operate various tools and equipment to include a computer, side loader, overhead crane, metal cutting saw and various small hand tools.
- Requires the ability to pass forklift course and drive equipment.
Physical Demands:
- Frequently lift or move up to 25 pounds.
- Occasionally life or move up to 70 pounds.
- Repetitive fine motor movements of the fingers, hands, and wrists performing tasks.
- Frequently working on foot, using tools, and performing repetitive actions that entail bending and stooping.
- Occasional sedentary work, sitting for extended periods of time.
Work Environment:
- The employee works in a factory environment and is occasionally exposed to wet, humid conditions and toxic or caustic chemicals. He/she is frequently exposed to fumes or airborne particles and works near moving mechanical parts. The noise level in the work environment is loud.
- **Title:** Saw Operator**Company:** Global Power Components – Milwaukee, WI (onsite 5-days/week)**Hire Type:** Temp-to-Hire (3+ months)**Overview:**Global Power Components is a privately held, growing manufacturer of UL steel fuel tanks, trailers, large generator enclosures...SuggestedTemporary workDay shiftAfternoon shift
$23.95 - $25 per hour
...Saw Operator OpportunityA Brown Deer Metal Distribution company is looking for Saw Operators! Key duties and responsibilities may include:Operate high powered sawsQuality inspection of parts after completionSit-down and stand-up forklift operationPreferred Qualifications...SuggestedWeekly payWork at officeLocal areaShift workDay shiftAfternoon shift$18 - $21 per hour
...crucial role in assembling high-precision components, packaging finished products, and supporting various production and warehouse operations. You'll work closely with a collaborative team in a fast-paced, innovative environment focused on smart manufacturing. This is...SuggestedHourly payWeekly payTemporary workLocal areaImmediate startShift workNight shiftDay shiftAfternoon shift- ...Job Description 1st shift Laminate countertop and/or cabinet fabricator. Core Responsibilities Cutting and Shaping: Use Table saws, routers, jigs saws, staple guns, glue spray equipment Quality Control: Inspect product before delivery or installation. Shop...SuggestedShift workDay shift
$20 - $40 per hour
...according to specifications. Use hand and power tools such as saws, hammers, drills, and nail guns safely and efficiently. Lay... ...North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting...SuggestedWeekly payContract workTemporary workImmediate start- Job Description Job Description Assemble wood crate for shipping Use hand tools inluding saw, hammer, drill, nailgun, tape measure Use additional tools including band saw, table saw, panel saw, bander Fork Lift experience not required but is a plus
$30 - $40 per hour
Job Description Job Description In need of a Carpenter to work on small to large-scale residential renovation projects, ranging from kitchen, bathroom, basement, and whole home remodels. Hours are based on the changing needs of the business, though candidates can typically...Hourly payFor contractorsLocal areaNight shift$25 - $40 per hour
Job Description Job Description Rough Carpenter – Milwaukee, WI Pay: $25–$40/hr based on experience Benefits: Health, Dental & Vision Insurance Joint Construction is looking for experienced Rough Carpenters to join our team in the Milwaukee area. Responsibilities...Full time$40 per hour
Job Description Job Description Apply Carpenter Brookfield, Wisconsin - Posted on November 16, 2026 Published By Lily Goerbig Trillium Construction is now hiring Finish Carpenters for commercial work in the Brookfield WI area! Projects include...Immediate start$22 - $39 per hour
...materials. Utilize hand and power tools such as chisels, planes, saws, drills, and sanders to construct, repair, and erect structures.... ...North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America,...Weekly payContract workTemporary workImmediate startMonday to FridayNight shift$20 - $28 per hour
...Job Description Job Description Horizontal Bandsaw Operator Systems Engineering & Automation Corporation 15601 West Lincoln Avenue... ...be responsible for setting up and operating horizontal band saws to cut aerospace-grade alloys — including titanium, Inconel, and...Hourly payApprenticeshipAll shiftsShift workNight shiftWeekend workDay shift$30 - $45 per hour
ADM Contractors is hiring a Framing and Finish Carpenter in Milwaukee, WI, paying $30 to $45 an hour based on experience and skill. You will handle everything from demolition and structural framing to trim, cabinets, and stairs, leading the work on site and building it...Weekly payFull timeFor contractorsMonday to FridayShift work$25 - $40 per hour
Job Description Job Description Trim / Finish Carpenter – Milwaukee, WI Pay: $25–$40/hr based on experience Benefits: Health, Dental & Vision Insurance Joint Construction is looking for experienced Trim / Finish Carpenters to join our team in the Milwaukee...Full time- Carpenter Brookfield, Wisconsin - Posted on November 10, 2026 Published By Lily Goerbig Trillium Construction is now hiring Steel Stud Carpenters for commercial work in the Brookfield WI area! Projects include offices, restaurants, remodels, apartment complexes...Immediate start
$44k - $61.66k
...responsible for a variety of tasks, including measuring and marking materials with precision tools, cutting wood to specified lengths using saws, and assembling pieces with nails, screws, or other fasteners. You'll also erect structures such as frames, roofs, and staircases,...Full timeWork at office$34 per hour
We are currently hiring Scenic Journeyman Carpenters in Milwaukee, WI for upcoming projects. Pay is up to $34.00 hr. per hour based on experience and skillset. The Scenic Journeyman Carpenter is responsible for constructing and installing platforms for exhibits and decks...Hourly payCurrently hiring- ...Strong understanding of mathematical concepts and measurements Ability to read and take action on blueprints Ability to safely operate hand and power carpentry tools Knowledge of building regulations and codes Ability to stand for long periods and lift heavy...Flexible hours
$26 - $38 per hour
Carpenter Position Tradesmen International is looking to expand our team of qualified trade professionals for current and future projects in and around Milwaukee, WI. Most positions are first shift with a pay range of $26-38/hour based on experience and skill level....Work at officeDay shift- ...and hold materials in place for the lead crew. Maintain a clean, organized, and safe job site by clearing debris and hazards. Operate basic hand and power tools under supervision. Requirements & Qualifications Some prior experience or basic knowledge of...Local area
- ...and run edgebander Edgeband complex laminate designs by hand. Lay up laminate and veneer on 4x8 and 5x8 sheets of substrate. Slot and T-mold panels. General knowledge of wood working tools such as table saw, trim router, pocket screw boring machine etc. #J-18808-Ljbffr...
- Have Experience in Custom Molding for Picture Framing Have excellent Customer Service Skills Have Merchandise Display experience Possess Basic Computer Skills Be Trustworthy And Dependable Provide Previous Work References A Successful Candidate Will Be knowledgeable with...Full timeFlexible hours
- Trim Carpenter Trillium Construction is now hiring Trim Carpenters in the Brookfield, WI area! Work will take place in a new, commercial setting. Work is Monday-Friday, 7am-3:30pm. Pay is $27-$34/hour depending on experience and skill level. Work is scheduled through...Immediate startMonday to Friday
- ...standards. Execute precise rough and finish carpentry skills across various residential job sites. Coordinate daily job site operations, directing team members and trade contractors effectively. Maintain clear, professional communication with homeowners to...For contractors
$34.51 per hour
Position Summary The Lead Carpenter works directly with the Technical Director and Scenic Charge Artist to ensure information is communicated effectively to the shop floor and scenic elements are completed safely, accurately, and on schedule. Serving as the day-to-day ...Hourly payFull timeSeasonal workLocal areaImmediate start- Carpenter / Measure TechnicianChampion Window is seeking for a Carpenter / Measure Technician. As a Carpenter / Measure Technician, you will be responsible for accurately measuring the customer's home for installations and being responsible for completing service jobs ...Full timeLocal areaImmediate startFlexible hours
- Job Description Job Description Medical-Surgical nurses provide direct care to adult patients in a variety of settings and is the largest group of nurses. They provide care for patients often with multiple diagnoses, across multiple medical specialties.
$126k - $176k
About SignifyThrough bold discovery and cutting-edge innovation, we lead an industry that is vital for the future of our planet: lighting. Through our leadership in connected lighting and the Internet of Things, we're breaking new ground in data analytics, AI, and smart...Full timeWork from homeHome officeFlexible hours$19 - $24.25 per hour
...built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we’re all driven to perform at our best— for ourselves and our clients. At our core,...Relocation packageShift workNight shiftRotating shift3 days per week- ...able to find what they're looking for. Provide a safe, clean and clutter-free environment. Major Activities Adhere to Standard Operating Procedures (SOP's) and Company programs to ensure compliance to applicable laws and requirements; execute Company policies and...Part timeNight shiftEarly shift
- ...built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we’re all driven to perform at our best— for ourselves and our clients. At our core,...Local areaShift workNight shiftRotating shift3 days per week
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Saw Operator. Be the first to apply!






