RF Hardware Design Engineer
Powerus
About Powerus
Powerus is building a next-generation American autonomous systems platform designed to move, protect, and sustain critical assets in high-consequence environments. The company combines advanced autonomy, manufacturing capability, operational expertise, and strategic acquisitions to support defense, national security, critical infrastructure, and commercial operations globally.
Mission
Our mission is to deliver resilient autonomous technologies that strengthen national security, improve operational safety, and expand the capabilities of organizations operating in complex environments.
Why Join Powerus
Powerus designs and manufactures its own aircraft, and the radios that fly on them are designed in house rather than bought off the shelf. RF hardware decisions made now set the performance envelope for the whole fleet.
This role sits close to the hardware. The role covers board design, bench bring-up, and flight on the aircraft the board was built for.
Position Overview
Powerus is seeking an RF Hardware Design Engineer to design the radio frequency hardware carried on Powerus unmanned platforms. The role covers transmit and receive chains, power amplifiers, and filtering, from schematic through layout and bench bring-up, in coordination with antenna, mechanical, and test engineering through qualification and into production.
Key Responsibilities
- Design RF and microwave circuits from 100 MHz to 6 GHz, including transmit chains, receive paths, filtering, switching, and frequency conversion
- Perform schematic capture and RF printed circuit board layout, including controlled-impedance routing, grounding, shielding, and thermal management
- Select and characterize amplifiers, mixers, synthesizers, and passive components against link budget, linearity, noise figure, and DC power requirements
- Simulate circuits before fabrication and compare simulation results against measured results
- Perform board bring-up using vector network analyzers, spectrum analyzers, and signal generators, and isolate faults to the component level
- Coordinate with mechanical, power, and integration engineers on enclosure, connector, and cabling design
- Support design reviews, qualification testing, and transition to production
Qualifications
- Must be located in the United States, within commuting distance of Rock Hill, SC
- Bachelor's degree in Electrical Engineering or a related field
- Two or more years of board-level RF or microwave hardware design experience, from schematic through bring-up
- Working knowledge of link budgets, noise figure, impedance matching, filter design, and intermodulation
- Experience with vector network analyzers, spectrum analyzers, and signal generators
- Experience with an EDA tool for schematic capture and RF layout
- U.S. Person status required (U.S. citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)); this role involves access to ITAR- and EAR-controlled technical data
Preferred Qualifications
- RF design experience for airborne, unmanned, or space systems with size, weight, and power constraints
- GaN or GaAs power amplifier design experience
- Experience with RF circuit simulation tools and electromagnetic solvers
- Experience with vibration, thermal cycling, and altitude qualification testing
- Active or prior U.S. security clearance
What We Look For
Candidates should have owned a design end to end and validated it on the bench rather than on paper, and should be able to read a datasheet critically, defend a component choice against a link budget, and state plainly what has and has not been measured.
Equal Opportunity Statement
Powerus is an equal opportunity employer committed to building a diverse and mission-driven workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by applicable law.
- Job DescriptionAs a Senior Advanced RF Hardware Design Engineer-Wireless Mobility Products, you will lead the design and development of RF and wireless hardware for connected mobility products, taking designs from concept through product release. You will apply hands-on...Suggested
$110k - $160k
...Electrical Engineer – PCB Design & Embedded Systems (US Citizen Only) This position is in Mooresville... ...Contribute to space-grade electronic hardware development, ensuring reliability and... ...speed digital (1+ Gbps) data lines and RF PCB design (preferred). Familiarity...SuggestedFull timeH1bVisa sponsorshipFlexible hours$110k - $165k
.... This is a Lead Cloud & Infrastructure Engineering position at Vice President Level, which... ...candidate will drive execution across the full hardware lifecycle, from planning and... ...mainframe hardware installations and resiliency design.Experience managing Brocade SAN and...SuggestedTemporary workLocal areaWeekend work- ...industrial and medical computer solutions that are specifically designed to provide reliable performance in the most demanding... ...and a high-performing team. We are currently seeing a Hardware Applications Engineer to be responsible for hands on testing and documentation...SuggestedWork at office
$110k - $160k
...Description IST Precision, an engineering services firm specializing in... ...systems, is seeking a PCB Design Engineer to design the... ...PCB test fixtures and support hardware for high-value, precision applications... ...-speed digital (1+ Gbps) and RF PCB design, including DDR3,...SuggestedContract work$80k - $120k
Role: Hydraulic Design Engineer - Transportation Projects Location: Charlotte or Raleigh, NC Salary: $80,000 - $120,000 (Negotiable, DOE) + Benefits Duration: Permanent A leading civil engineering firm in Charlotte and Raleigh, NC is looking to add a Hydraulic Design Engineer...Permanent employment$18 - $50 per hour
...global software company dedicated to the world of computer aided design, 3D modeling and simulation- helping innovative global... ...program Position Overview: As a Thermo-Mechanical Product Engineering Intern , you will support the development and application of...Remote jobHourly payFull timeInternshipWork at officeLocal area- ...is a full-service land planning, landscape architecture, civil engineering, transportation, and geomatics firm located in North Carolina,... ...our clients to create meaningful experiences through inspired design. Our employees are what make McAdams different. We bring...Contract workWork at office
- ...Duration: 12 Months Job Description: This position provides design, engineering and technical expertise for transmission lines and will primarily support the Client’s- Carolinas West region. Applicants must be familiar with Transmission Line engineering theories...
$45 - $55 per hour
...Modis is seeking a Mechanical / Structural Engineer for a Contract job with a client in Charlotte, NC. Ideally looking for applicants... .... ~ Strong understanding of metal component and structural design, including stampings, formed components, welded assemblies,...Hourly payContract workTemporary workLocal area- Job Description Technology is the driving force behind our product. We’re looking for brilliant people to join our team. Apply now!
- ...Job Description Job Description ReNuke Services is seeking a Transmission Line Design Engineer IV for our client's site in Charlotte, NC! Description: *Full time, hybrid, 3 days/week in office/field* *Personal vehicle will be driven, mileage reimbursed* Distribution...Full timeWork at office3 days per week
$20 - $36 per hour
...Job Summary The Power Distribution Design Engineer supports the design and planning of electrical power distribution systems in Charlotte. The role combines office-based design-system work and work-order management with approximately one day per week collecting and...Full timeWork at officeWork visa1 day per week- ...opportunity! CTG's premier client has a contract assignment for a Design Engineer. Type: Contract Job Title: Design Engineer... ...conceptualization and iterative development of innovative fiber optic hardware solutions for all market segments. Create 3D models and...Contract workWork at officeLocal areaRemote work
- ...Job Description Job Description Lead Engineer, Mechanical Charlotte NC 28273 6 Months - Contract REQUIREMENTS Bachelor... ...EPC Power projects, including oversight of engineering and design personnel. Direct experience executing EPC Power projects is...Contract workRelocationRelocation package
- ...Job Description Job Description Lead Mechanical Engineer Location: Charlotte, NC or Houston, TX Employment Type: Contract-to... ...technical leadership and oversight for mechanical engineering and design activities on large-scale EPC power generation projects,...Contract work
- ...As a Structural Connection Design Engineer at SteelFab, you’ll design the bolted and welded connections that form dynamic structures. Essential Job Functions # Thoroughly assess contract structural and architectural documents to identify and clarify design requirements...Contract workFor contractors
- ...stock replenishments or the filling of customer orders. Executes transactions inside the management system, and utilizes both PC and RF scanner technologies to process transactions accurately. Reviews and verifies all documentation used throughout the process to ensure...Work experience placementShift work
- ...VIAS is a trusted engineering design firm committed to delivering high-quality transportation solutions across the Carolinas and beyond. We take pride in our collaborative culture, technical excellence, and the lasting impact our work has on communities. As we continue...Flexible hours
$111k - $155k
Overview The Instrumentation & Controls Engineer leads the development, design, enhancement, and integration of instrumentation and controls systems (i.e., SCADA). The role will provide engineering expertise as it pertains to capital improvement project planning...For contractorsWork experience placementWork at officeRemote work- ...great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a...Permanent employmentFor subcontractorWork at officeLocal areaWorldwideFlexible hoursNight shift
- ...Job Description Job Description Bring your structural design experience to a growing Charlotte team and help deliver high-quality... ...The Opportunity We are looking for a Structural Design Engineer to join our Charlotte office and support its continued growth....For contractorsWork at officeLocal areaFlexible hours
- ...Are you a hands-on engineer who thrives on turning ideas into reality? We're looking for a Design Engineer to drive product innovation, improve manufacturing processes, and lead projects from concept to launch in a fast-paced environment. We are seeking an experience...Work at officeLocal area
$75k - $90k
...Job title: Product Engineer Company: SPI Products Workplace type: Hybrid Location: Charlotte, NC Employment type: Full-time... ...of having some fun along the way. Whether it's taking a proven design to the next level or bringing something brand new to life, there...Full timePart timeWork at officeOverseas$100.39k
...Amazon, our tech isn't just a tool, it's your playground. Our engineers work on scalable systems, cloud services, and customer-facing... ...team tasked with tackling the most fascinating challenges in designing, building, and operating Amazon data center facilities. The team...Full timeSummer workInternshipLocal areaMonday to Friday$115k - $140k
...established company in the structural steel and metals fabrication industry in the Charlotte, NC area. Our client is seeking a Design Engineer to design steel structures, connections, and systems. Position Responsibilities: - Design and analyze steel members,...- ...Brady Corp’s Productivity Solutions and Services, you will have the opportunity to use your advanced knowledge of the RF engineering discipline to design some of our most electrically innovative products. Using the same technology that’s in your smart phone, Brady Corp....
$97.4k - $141.05k
...seeking a highly skilled and experienced Instrument and Controls Engineer to join our dynamic engineering team based in Charlotte, NC or... ...Portland, ME. The ideal candidate will play a crucial role in designing and constructing renewable natural gas (RNG) plants and...Full timeFor contractorsRemote work- ...Job Description Job Description Design & Development Engineer Concord, NC (Onsite) Position Summary Our client is seeking a Mechanical Design & Development Engineer to join its growing engineering team in the greater Charlotte area. This role is focused...
- ...Job Description Job Title: Custom Software Engineer Location: Charlotte, NC Hybrid Duration: Contract Key Responsibilities... ...be responsible for developing custom software solutions to design code and enhance components across systems or applications. Your...Contract workWork experience placement
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to RF Hardware Design Engineer. Be the first to apply!







