Grinder
Standex
Grinder Position
A grinder is a qualified person who can use various hand and mechanical grinders and sanders to remove specific amounts of material to prescribed guidelines for a desired finish or thickness of a part or tool.
What You'll Do
- Set up parts on pedestals, clean parts using prescribed cleaning agents
- Operate, or tend grinding and related tools that remove excess material, burrs from surfaces
- Deburr edges, buff, hone, or polish metal
- Perform typical grind/jitterbug/deburr operations to support the production schedule
- Maintain the work area and equipment in a clean and orderly condition
- Follow prescribed safety regulations and guidelines
- Must participate in O.J.T (on the job training) as directed from time to time
Rough Grind – The process used as a preliminary or intermediate grinding operation to remove excess material from the part.
- Prior to grinding, review thickness readings written on part.
- Review planned thickness requirements.
- Make a plan on how to efficiently achieve the desired thickness result(s) using an air grinder and various sandpaper grits.
- Verify thickness results and overall finish with supervisor.
- Send part to vidi-gage department for thickness check, if needed.
- Neatly stage part for its next operation.
Final Grind – The process used as the last grind operation to produce the final part thickness and surface finish requirements. Operators use air grinders and various grinding grits to accomplish this process.
- Prior to grinding, review thickness readings written on part.
- Review planned thickness requirements.
- Make a plan on how to efficiently achieve the desired thickness result(s) using an air grinder and various sandpaper grits to achieve planned thickness and surface requirements.
- Verify thickness results and overall finish with supervisor.
- Send part to vidi-gage department for thickness check, if needed.
- Neatly stage part for its next operation.
Grind/Blend Chemical Milling Areas – The process used to grind level and blend the material steps created by the chemical milling process.
- Prior to grinding, review thickness readings written on part.
- Review planned thickness requirements.
- Make a plan on how to efficiently achieve blend and level the material using an air grinder and various sandpaper grits.
- Check material thickness if step removal is in question.
- Verify thickness results and overall finish with supervisor.
- Send part to vidi-gage department for thickness check, if needed.
- Neatly stage part for its next operation.
Grind Weld – The process used to remove excess weld material and/or smooth the weldment.
- Using a grinder, remove excess weld material and reduce weld height and irregularity.
- Exercise care to prevent removal of parent material.
- Ensure that a 63 Ra or better surface finish is achieved.
What You'll Bring
- No experience required (on the job training)
- Ability to lift up to 50 pounds
- Basic math skills
- Must be able to stand for 8 hours a day
- Must be able to work in a fast-paced environment
- Must be open to overtime
What We Value
- Six (6) months experience in warehouse production or manufacturing environment
- Bilingual in Spanish/English
- Ability to be a team player
- Ability to be detail-oriented
Equal Opportunity Employer. We consider candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.
$20 per hour
...Institute (LKI). As a result, our company is growing fast and always welcoming new talents. SUMMARY The Production Machine Trainee (Grinder) will be trained on entry-level manufacturing duties and machines. A level of competency needs to be achieved and maintained at the...SuggestedTraineeshipWork experience placementLocal areaImmediate startWorldwideDay shift- ...Job Description Job Description Join a busy aerospace machine shop as a CNC O.D. Grinder Set-up/Operator responsible for operating and setting up Studer equipment. This role requires reliability, attention to detail, and the ability to work independently, including...SuggestedFlexible hours
$38 per hour
...Job Description Earn $38/hr + Up to $3,000 Bonus in a Precision Aerospace Manufacturing Environment Are you an experienced CNC Grinder who thrives on holding ultra-tight tolerances and producing precision components that meet the highest quality standards? PDS Tech...SuggestedHourly payPermanent employmentShift workAfternoon shift- ...Centerless Grinder operator sets up and operates precision grinding equipment to grind lot parts in accordance with established shop practices. Performs work operations under supervision. Specific Duties and Responsibilities Sets-up and operates precision grinding...SuggestedLocal area
$22 - $28 per hour
...requires standing for long periods of time and lifting up to 50 lbs. Candidate must have three years of experience with centerless grinders and cylindrical grinders. Possess basic grinding skills required to set-up and run multiple cylindrical parts. Have knowledge of...SuggestedPermanent employmentMonday to FridayAfternoon shift$23 - $30 per hour
...for long periods of time and lifting up to 50 lbs. Job Details: Candidate must have three years of experience with centerless grinders and cylindrical grinders. Possess basic grinding skills required to set-up and run multiple cylindrical parts. Have...Permanent employmentMonday to FridayAfternoon shift$60 per hour
Job Description Job Description We are looking for a Senior Welder to fabricate precision components for our modular nuclear reactor systems. You will perform high-integrity welds on pressure vessels, piping, and structural assemblies, working closely with engineering...Full timeImmediate startFlexible hoursShift work- Job Description Job Description Job Summary We are seeking a Welder qualified to AWS D1.1 f or MIG welding. The successful candidate will be responsible for planning fabrication, fitting, tacking, and welding tasks, working closely with engineers to create...
$22 - $26 per hour
Welder Robinson Helicopter Company is a leading manufacturer of civil rotorcraft with a 50-year history of providing affordable helicopters for a wide range of applications. Robinson Helicopter Company, located in Torrance, CA, is an engineering-focused organization...Full time- ...and strict Quality Assurance standards of the aerospace, defense, and power generation industries. **PURPOSE ** The Centerless Grinder Operator is responsible for setting up, adjusting, and operating centerless grinding machines to produce precision cylindrical...Permanent employmentWork at officeMonday to FridayShift work
$22 - $28 per hour
...requires standing for long periods of time and lifting up to 50 lbs. Candidate must have three years of experience with centerless grinders and cylindrical grinders. Possess basic grinding skills required to set-up and run multiple cylindrical parts. Have knowledge of...Permanent employmentMonday to FridayAfternoon shift- Job Description Job Description Hadrian - Manufacturing the Future Hadrian is building autonomous factories to reindustrialize America. By combining AI, advanced software, robotics, and full-stack manufacturing, we help aerospace and defense companies build rockets...Permanent employmentFull timeRelocation packageFlexible hours
$22 - $33 per hour
Fabricator Opportunity at Singer Vehicle Design Join Our Relentless Pursuit of Excellence At Singer Vehicle Design, we believe Everything is Important. That's why every nut, bolt, stitch, and finish matters when we restore and reimagine Porsche 911s into some of ...Hourly payTemporary workWork experience placementMonday to Friday- ...Job Description Job Description Full-time Centerless Grinder State-of-the-Art Aerospace Manufacturing Company About Us Our company is a leading aerospace manufacturer, specializing in the production of high-precision components for the aviation and space industries...Full timeLocal area
$28 - $32 per hour
Job Title: Solderer Assembler Job Description This role focuses on soldering, electronic and mechanical assembly, and repair of units and module boxes in a dynamic startup technology environment. You will build, repair, and troubleshoot hardware and software-related...Weekly payContract workTemporary workFlexible hoursShift work$18 - $25 per hour
...Job Description Job Description Grinding Operator/Surface Grinder - TalentZok OVERVIEW Are you looking for a new career opportunity with an exciting company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below....Work at officeImmediate startMonday to Thursday- Auto Body Shop Detailer/Polisher We are currently seeking a diligent and dedicated Auto Body Shop Detailer/Polisher to join our dynamic team at Urban Collision Center. In this role, you will be responsible for thoroughly cleaning, polishing, and detailing vehicles post...
- ...Fitter must be able to operate and/or use related equipment and tools which include stick, wire feed, TIG, forklifts, hoists, slings, grinders (portable & Bench), cutting torches, hand tools, drills, punches, a tape measure, etc.. This role must maintain a safe and clean...Flexible hours
- About Us: Echelon Supply and Service is a leading provider of premium industrial and hydraulic hose solutions for commercial and defense markets across North America. Since 1977, we've built our reputation on a customer-first approach, delivering quality products and ...Local area
- ...components for welding according to specifications (such as powered saws to match measurements when cutting material) Use angle grinders to prepare the parts that must be welded Use manual or semi-automatic welding equipment in various positions to weld components...ApprenticeshipWeekend work
$24 - $58.2 per hour
Orbital Tube Welder And Fabrication TechnicianVast is developing next-generation space stations and space infrastructure using an incremental, hardware-rich, and low-cost approach. Vast is rapidly developing its multi-module Haven Station to ensure a continuous human presence...Permanent employmentFull timeTemporary workShift workDay shift$40 per hour
Welder And Fabrication Technician (1st Shift) Project Length: 3-month project (contract) Pay: $40 (DOE) Schedule: 5:00 AM to 2:30 PM (Mon to Fri and OT) Location: Long Beach, CA Position Summary Kimco Staffing is seeking […]Contract workDay shift- ...up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using...Permanent employmentFor contractors
- Shipyard Structural WelderLabor One Staffing is hiring shipyard structural welders in San Diego.Qualifications:Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions.Knowledge of welding characteristics of metal.Must be...Work at officeShift work
$21 - $24 per hour
Precision Hand FinisherVolt is Hiring!Volt is immediately hiring for a Machine Operator/Deburr & Polish Technician in Gardena, CA.As a Machine Operator/Deburr & Polish Technician, you will:Deburr and polish parts using a variety of hand tools and robotic equipment.Wash ...Hourly payFull timeTemporary workWork experience placementImmediate startMonday to FridayShift workWeekend work$21.38 - $32.08 per hour
Operations JobYour work shapes the world at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger...Part timeApprenticeshipCurrently hiringFlexible hoursShift work$32 per hour
...technical drawings, blueprints, sketches, and work orders. Operate metal fabrication equipment and shop tools, including saws, grinders, drills, and routers. Assist with on-site installations, modifications, and project builds as needed. Load, unload, and prepare...Hourly payFull timeLocal areaShift work- Job Description Job Description Candidate will have experience with MIG welding and be knowledge of AWS D17.1 spec and possess a strong background in structural fabrication. The ideal candidate brings strong welding skills and the ability to take a project from a drawing...
- Job Description Job Description PRIMARY FUNCTION: PRIMARY FUNCTION: Welding Pipe/Structural Pipe Supports, Carbon Steel, Stainless Steel, Galvanized. Sch40 – 160 wall. Read Blueprints, Cut Pipe, Fitting Pipe to AWS section B31.1 & b31.9 building code. Welding ...
- ...Nationwide) Day to Day Duties: ~ Performing arc and torch cutting and gouging. ~ Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. ~ Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc...Full timeCurrently hiring
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Grinder. Be the first to apply!



