Lead Test Engineer (Power Distribution)
Trystar Inc
Job Description
Job Description
Job Title: Lead Test Engineer, Power Distribution
Job Description
This is a new role at Trystar: you will set how Trystar proves each new power distribution product before it reaches customers. We are looking for a Lead Test Engineer, Power Distribution, to own the design verification and validation of our power distribution products and systems, from concept through certification and release to commercial-scale manufacturing. Our products include docking stations, transfer switches, loadbanks, distribution panels, switchboards, switchgear, and transformers, AC and DC, at low and medium voltage, and the integrated power distribution centers and e-houses that combine them for data centers and other critical power applications. You will develop the test methods, plans, and test setups that prove each design meets its requirements and the applicable UL, IEEE, and NEMA standards. You will also run type and pre-compliance tests, conduct and witness tests at Nationally Recognized Testing Laboratories (NRTLs) and high-power laboratories, and validate equipment at supplier factories, in integrated system tests, and at customer sites. You will work as a senior individual contributor with no direct reports, set up the verification and validation practices that design teams follow, and direct, on a project basis, the technicians and engineers who run tests with you.
Location: Houston, TX; Faribault, MN; Burnsville, MN; or Charlotte, NC, onsite. Travel within North America up to 30%.
What you will do:
- Own design verification by test and demonstration, and design validation, for assigned power distribution products and integrated systems, from concept through certification and release to commercial-scale manufacturing.
- Develop test methods, test plans, procedures, and acceptance criteria that trace to product requirements, design failure mode and effects analyses (DFMEAs), and applicable standards, and agree on the verification method for each requirement with technical leads and design engineers.
- Plan and run design verification and type tests, such as dielectric withstand, insulation resistance, temperature rise, short-circuit withstand and closing, endurance, and transformer ratio, impedance, and loss tests, and analyze the results.
- Plan reliability and accelerated life tests, and apply design of experiments where they reduce the risk of field failures.
- Verify enclosure performance to UL 50E and ANSI/NEMA 250, and to IEC 60529 where a customer specifies an IP rating, including rain, external icing, and corrosion-protection tests of NEMA Type 3R outdoor enclosures.
- Validate medium-voltage equipment, DC distribution equipment up to 1500 VDC, and AC and DC loadbanks, including their protection, controls, metering, and communications, and coordinate with power conversion test engineering where systems include rectifiers, converters, or solid-state transformers.
- Prepare products and samples for compliance testing, run pre-compliance tests, and conduct and witness listing tests at NRTLs and high-power laboratories, in coordination with the compliance team.
- Agree on factory test plans with suppliers of new components and subsystems, witness their factory acceptance tests, host customer witness tests of new products, and report results against the agreed acceptance criteria.
- Plan and run integrated system tests of first-of-a-kind power distribution centers and e-houses, and validation tests at pilot customer sites, in coordination with project, commissioning, and service teams.
- Design, build, and maintain test benches, fixtures, instrumentation, data acquisition, and interlocks, and keep test equipment calibrated with traceable records.
- Write and maintain energized test procedures with environmental, health, and safety staff under NFPA 70E, and direct technicians, electricians, and assemblers in safe test execution.
- Automate test sequences, data acquisition, and data analysis in Python, and maintain test records and test data.
- Record objective evidence for each verified requirement, write independent test reports, and present test status, anomalies, and residual risks at design reviews and verification of readiness reviews.
- Investigate test failures, support root-cause analysis with design and quality engineers, verify corrective actions by retest, and feed lessons learned into design guidelines and test standards across Trystar sites.
- Derive end-of-line test requirements for commercial-scale manufacturing from design verification results and hand them over to manufacturing at each release.
- Evaluate test equipment and methods, and specify laboratory capability investments as product voltage, current, and power ratings grow.
- Develop and maintain the product validation schedule, identify test dependencies and critical-path activities, and communicate test readiness, blockers, risks, and completion status to engineering and program leadership.
REQUIRED
- Bachelor’s degree in electrical engineering or a related technical field, with typically 7 or more years of relevant industrial experience in hands-on testing and validation of power distribution equipment.
- Experience with design verification and type testing of power distribution equipment, such as switchboards, switchgear, transfer switches, panelboards, transformers, or loadbanks, including test methods, plans, procedures, and reports traced to product requirements.
- Working knowledge of product and test standards for power distribution equipment, such as UL 891; UL 1558 and IEEE C37.20.1; IEEE C37.20.2 and C37.20.3; UL 1008; UL 67; UL 1640; UL 508 and UL 508A; UL 1561 and the IEEE C57.12 series; UL 50, UL 50E, ANSI/NEMA 250, and IEC 60529; and the National Electrical Code (NEC). Experience with every standard listed is not required.
- Experience preparing for and conducting or witnessing tests at NRTLs or high-power laboratories.
- Proficiency with most of the following: power analyzers, oscilloscopes, high-voltage and current probes, thermal data acquisition, hipot and insulation resistance testers, micro-ohmmeters, transformer turns ratio (TTR) testers, and current injection test sets.
- Proficiency with Python for test automation and data analysis.
- Experience planning and tracking test schedules, identifying dependencies, and communicating test readiness and risks to engineering and program leadership.
- Working knowledge of NFPA 70E and safe work practices for energized, high-voltage, and high-energy testing.
- Demonstrated experience leading test programs, influencing design teams, and directing technicians and engineers.
PREFERRED
- Master’s degree in electrical engineering, mechanical engineering, or a related technical field.
- Experience testing medium-voltage equipment, including lightning impulse (BIL), power-frequency withstand, partial discharge, and internal arcing tests to IEEE C37.20.7, and working knowledge of UL 1562 for medium-voltage dry-type transformers.
- Experience testing DC power distribution equipment up to 1500 VDC, including 800 VDC class systems, and validating loadbanks.
- Experience with factory and site acceptance testing of power distribution centers, e-houses, or similar integrated systems, including acceptance testing to ANSI/NETA standards.
- Experience testing controls and communications of power equipment, such as PLCs, transfer switch controllers, and Modbus, and working knowledge of UL 61010-1 and UL 61010-2-201.
- Experience with seismic, environmental, transport, vibration, structural, and lifting validation of electrical equipment and enclosures.
- Experience with test traceability, test data logging, and test data management systems.
- Experience with data center or other critical power applications.
- NETA Level 3 or Level 4 technician certification, NFPA Certified Electrical Safety Compliance Professional (CESCP), or Professional Engineer (PE) license.
Skills
- Analytical rigor and attention to detail in measurement, data analysis, and test documentation.
- Sound engineering judgment in balancing test coverage, risk, schedule, and safety, and independence and integrity in reporting results that constrain a design.
- Clear written and verbal communication of test results, anomalies, and limitations to technical and non-technical audiences.
- Collaborative technical leadership across electrical, mechanical, controls, compliance, quality, and manufacturing engineering, and with suppliers and customers.
- Disciplined planning, prioritization, and delivery of test campaigns against a development schedule.
Working Conditions
You will work in laboratories, factories, and customer sites, including energized, high-voltage, and high-energy test areas, wearing the personal protective equipment that NFPA 70E and site rules require. The role requires standing, walking, climbing, kneeling, and reaching for extended periods, and lifting test equipment of up to 50 pounds, using mechanical aids where required. Travel within North America is up to 30%, including overnight stays at supplier factories, test laboratories, and customer sites. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
- ...solutions to meet the needs of various power and process industry sectors. Additionally... ...reduction.We are now looking for a Lead Process Engineer to join our team in Charlotte, NC, US.... ...projectsProvide commissioning support, test-runs, training and site visits in customer...SuggestedFull timeRelocation
$118.02k - $180.31k
...Responsibilities Our electric power generation clients are seeking to increase the power... ...work in the Mechanical Analysis Engineering group. You will work on major systems, equipment... ...in the following areas: Develop and lead licensing basis system and component evaluations...SuggestedHourly payLocal areaWorldwideFlexible hours3 days per week$20 - $36 per hour
...Job Summary The Power Distribution Design Engineer supports the design and planning of electrical power distribution systems in Charlotte. The role combines office-based design-system work and work-order management with approximately one day per week collecting and...SuggestedFull timeWork at officeWork visa1 day per week- Join Our Team as a Lead Process Engineer.Deciding on your next employer is not a decision to be made lightly. But if you want to work on the front... ...your expertise as our new Lead Process Engineer supporting Power Boilers.In this role, you will serve as a technical expert...SuggestedFull timeRelocation
$110k - $160k
...SIA) is currently seeking an experienced Engineer to join our Balance of Plant (BOP) group.... ...and cathodic protection. Support or lead proposals, scoping efforts, and client engagement... ...various industries including Nuclear Power, Energy Services, Pipeline Integrity, and...SuggestedPermanent employmentTemporary workWork at officeRemote workFlexible hours$128k - $140k
Job Title:Overhead Distribution Technical Leader IILocation:Charlotte... ...seeking an experienced engineer or applied researcher to help lead research focused on... ...in the electric power industry who is also motivated... ...of relevant engineering, testing, research, or utility...Full timeWork at officeRemote workHome officeFlexible hours$99.2k - $124k
Who we areGeneral Insurance is a leading provider of insurance products and services for... ...through a diversified, multichannel distribution network.Make your mark in Information TechnologyAt... ...Master's degree in Computer Science, Engineering, or a related fields.7+ Years...Full timeWork at office$100k - $140k
...Senior Substation P&C Engineer for our Richmond, VA and... ...in projects with our Power & Energy Substation... ...construction of transmission and distribution substations, power... ...engineering, design, testing, maintenance... ...WSP, one of the world's leading engineering and professional...For subcontractorLocal areaRemote workFlexible hours- ...Synechron, we believe in the power of digital to transform businesses... ...to deliver industry-leading digital solutions. Synechron’... ...& DevOps, Data, and Software Engineering, servicing an array of noteworthy... ...Office Foreign Exchange (FX) Test Engineer to support the electronic...Temporary workFlexible hours
- ...Description Job Description K&A Power Group – is a privately held engineering firm delivering worldclass... ...specializing in substation, transmission, distribution, and distributed energy resources... ...K&A Career: We are seeking a Testing & Commissioning Engineer to...Temporary workFlexible hours
- DescriptionBurns & McDonnell’s Power Global Practice is seeking to hire experienced I&C engineers to our Nuclear team focusing on both... ....ResponsibilitiesPerform and/or lead I&C design of projects from the... ...in Factory Acceptance Tests (FAT).Lead the production of I&C...
$28 - $40 per hour
...Job Description Distribution Engineer Location: Charlotte, NC (9711 Southern Pine Blvd., Suite A, Charlotte, NC 28273) Hire Type:... ...projects focused on planning, design, and implementation of power distribution systems throughout the North Carolina service area...Contract workFor contractorsWork at officeLocal areaMonday to Friday$103.71k - $138.28k
...the trusted network for the AI‑powered world, connecting people,... ...today. The Role The Field Engineering Quality Control Engineer is... ...Responsibilities Key Responsibilities Lead logistics projects from... ...Registered Communications Distribution Designer certification....Full timeTemporary workFor contractors- ...Months Job Description: The Engineering Technologist III is a senior-... ...designing complex electric distribution work orders. This role... ...driven work where applicable. Lead technical design efforts for... ...: Electric distribution/ Power Distribution Experience...Relocation
$100k - $175k
...Overview We are seeking a highly skilled and motivated Distribution Planning Engineer to lead and support DER impact studies within our electric utility... ..., thermal loading, protection coordination, and power quality. Collaborate with interconnection teams to evaluate...Work at officeRemote work- ...Description Job Description Position Overview SE Engineering, PC is seeking an entry-level Power System Engineer I to support power system analysis, field testing and troubleshooting, and electrical distribution system design. This role combines office-based...InternshipWork at officeLocal areaVisa sponsorshipWork visa
$46 - $48 per hour
...client, IT Solutions team is seeking a QA Engineer to join their team. As a QA Engineer,... ...ability to work confidently with APIs, testing and integrations. Please note: This job... ...Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps...Weekly payContract workTemporary workFlexible hours- ...Description Role: Forward Deployment Engineer (FDE) Technical Lead - Artificial Intelligence... ...developing backend services, APIs, and distributed applications. ·Experience processing... ...Google Cloud. ·Experience in Git, testing frameworks, code reviews and modern...
- ...Role: Senior Testing Engineer Location: Charlotte, NC(ONSITE) Exp: 9+ years Face 2 Face Interview Full Time Must Have Technical/Functional Skills Primary Skill : Automation testing - Selenium web driver or play wright, Java, Litmus...Full time
$81.5k - $138.55k
...enterprise adopt modern data and AI solutions at scale. The test automation engineer implements automated testing, release validation, quality... ...release readiness with Agile Delivery Managers, Functional Leads, and SRE. Job Location: Remote, however, strong preference...Full timeContract workWork experience placementLive inWork at officeImmediate startRemote work- ...Job Description We are seeking a Senior QA Engineer to lead the design, development, and execution of testing solutions that ensure the quality, reliability, and scalability of our software products. This role requires expertise in testing the underlying platform and...
- ...messaging to ISO20022, and strong experience of Testing payments applications will work Senior Payments Test Automation Engineer (QA Lead) Role Overview: We are seeking an... ...working effectively in a global, distributed team setting (collaborating across onshore...
- ...Job Description Job Description Test Automation Engineer Location: Charlotte, NC / Pennington, NJ /Tempa, FL (Onsite) Contract Role Summary Required Skill and Experience: Experience in Selenium test automation framework design, development, maintenance...Contract work
$107.9k - $195.05k
...do business.Your greatest work is ahead!We’re seeking a Lead Substation Physical Engineer to take a key role in delivering high‑impact substation... ...ll help shape the next generation of substation projects powering communities.Hybrid Schedule: 3-days a week in the Charlotte...Full timeInternshipWork at officeLocal areaRemote workFlexible hours3 days per week$90k - $100k
...Role: AI Testing – Automation QA Engineer (Selenium) Location: Charlotte, NC We are At Synechron, we believe in the power of digital to transform businesses for the better. Our global... ...technology to deliver industry-leading digital solutions. Synechron’s progressive...Temporary workFlexible hours- ...Job Description Job Description Job title -IVR Test Automation Engineer (Cyara) Work location - Charlotte NC 28273 Contract duration - 12 months Interview mode - In person interview Must Have Skills Strong experience in IVR (Interactive Voice Response...Contract work
- ...passionate about code-driven test automation and making testing... ...more efficient? As a Senior Test Engineer, you’ll help our product teams... ...limits. You’ll also put AI-powered tools and intelligent agents to... ...automation frameworks.Experience leading QA teams in Agile environments...Work at office3 days per week
$111.3k - $215.1k
...are, join our team. KPMG is currently seeking a Technical Lead, Forward Deployed Engineering to join our AI & Data Labs practice. Responsibilities:... ...evaluation, and operational readiness; mandate rigorous testing, including golden sets, regression harnesses, and red-teaming...H1bLocal area- ...Job Description Job Description Job Title: Senior Performance Test Engineer Location: Iselin, NJ 08830 (Hybrid) Duration: 06 Months Must Have Skills: Good Communication Hands on PT&E, Chaos Testing, Kubernetes PT tools with multiple protocols Able...
$73.45k - $132.78k
...you grow your career is good business. Leidos is seeking a Distribution Engineering Manager who is passionate about electric utility design engineering to lead and oversee a team within our growing Power Distribution Engineering organization. This role will be...Full timeWork at officeLocal areaImmediate startRelocationFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Lead Test Engineer (Power Distribution). Be the first to apply!
- lead engineer Charlotte, NC
- lead infrastructure engineer Charlotte, NC
- lead operating engineer Charlotte, NC
- lead network engineer Charlotte, NC
- test engineer Charlotte, NC
- lead performance test engineer Charlotte, NC
- performance test engineer Charlotte, NC
- energy efficiency engineer Charlotte, NC
- electrical power engineer Charlotte, NC
- power engineer Charlotte, NC






