Machinist *
$24.82 per hour3M Co
Job Description: Job Description 3M is seeking Machinist candidates in Clarkston, Georgia! Full time 2nd or 3rd Shift available
Additional qualifications that could help you succeed even further in this role include:
Relocation Assistance: Not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Supporting Your Well-being
3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope.
Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers.
The starting rate of pay for this position is $26.25 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: #INPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please click on the following links and select the country where you are applying for employment to review the applicable Terms of Use (link here) and Privacy Policy (link here). Before submitting your application, you will be asked to confirm your agreement with the terms.
- Pay Starting at $24.82
- New hires start with 3 weeks paid vacation + 12 paid holidays
- Health, vision and dental start day one
- Employee stock discount
- 401K Match of 5%
- Using Computer Aided Design Software to implement solutions for obtaining desired grinding results
- Use Coordinate Measuring Machine and other measuring tools such as calipers and micrometers to verify work and adjust
- Identify and properly manage hazardous waste
- Participating in all safety and regulatory training needed to fulfill the duties of the position
- Follow all plant safety rules and regulations.
- Analyze the performance of equipment and tooling to recommend changes and improvements to equipment and procedures
- Communicating with other departments regarding quality, safety, and equipment issues.
- Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution
Additional qualifications that could help you succeed even further in this role include:
- This position may require overtime, weekend, and holiday work
- Excellent mathematical operations such as addition, subtraction, multiplication, and division, as well as, understanding and proficiency with geometry, trigonometry, and machining calculations
- Complex reading of drawings and notes.
- Onsite - Clarkston, Georgia
Relocation Assistance: Not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Supporting Your Well-being
3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope.
Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers.
The starting rate of pay for this position is $26.25 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: #INPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please click on the following links and select the country where you are applying for employment to review the applicable Terms of Use (link here) and Privacy Policy (link here). Before submitting your application, you will be asked to confirm your agreement with the terms.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Machinist * in Clarkston, GA vacancy
$39.77 per hour
...How you'll help us Keep Climbing (overview & key responsibilities) The Machinist will be part of a team operating shop equipment to manufacture, repair and or restore airframe and engine parts to their original serviceable condition. Required to design and construct...SuggestedHourly payTemporary workFlexible hoursShift work$28.68 per hour
...setup and operate manual and numerically controlled machine tools as well as assemble and disassemble turbine components. Our Machinist position is a full-time onsite position at our Chamblee, GA facility. New hires will work our 1st shift work schedule of Monday-Friday...SuggestedHourly payFull timeContract workApprenticeshipImmediate startRelocation packageMonday to FridayShift workDay shiftAfternoon shift$27.52 - $34.07 per hour
Job Title Location 500 Wharton Circle, Atlanta, GA, 30336, United States Base Pay $27.52 - $34.07 / Hour Job Category Manufacturing, Machine, Lathe Industry Printing Employee Type Non-Exempt Job Description Description SummarySuggested- ...technology solutions for the printing, packaging and converting industries worldwide. Our Atlanta, GA location is seeking a full time Machinist for a 2nd or 3rd shift position. Conceptual Skills : Skilled on Manual Lathe, Mills, bandsaw and basic hand tools....SuggestedFull timeWorldwideShift workNight shiftAfternoon shift
$39.77 per hour
Job Posting United States, Georgia, Atlanta TechOps 23-Jun-2026 Ref #: 32922 Starting Pay: $39.77 per hour Delta Air LinesSuggestedHourly pay$30 - $40 per hour
Bridal & Formalwear Seamstress Gown Alterations Milton, Georgia, United States $ 30.00 - 40.00 (US Dollar) About the Job Bridal & Formalwear Seamstress Gown Alterations Join our network of independent alteration professionals. What You'll Do Alter bridal gowns...For contractorsLocal areaWork from homeAfternoon shift- ...Machinist/Programmer Opportunity Our client is seeking a skilled Machinist/Programmer to join their team in Albany, Georgia. The successful candidate will be responsible for CNC programming for mill and lathe parts, creating program setup sheets, aiding in fixturing...Temporary work
$20 - $22 per hour
Job Title: CNC Machine Operator Job Description As a CNC Machine Operator, you set up and load raw materials into CNC equipment, run parts according to program files, and use precision measuring instruments to ensure every finished product meets exact design specifications...Weekly payContract workTemporary workMonday to Friday- Job Opportunity Ready to earn more by making the next move in your career? Are you skilled at drilling and cutting instruments, creating precision metal parts and delivering on the specs of each and every project? If so, we have amazing opportunities for you to put ...Immediate start
- Job Description Job Description Seamstress Duties and Responsibilities Follow patterns to manufacture apparel and other pieces Assist with template constructions and designs Complete repairs, as needed Seamstress Requirements and Qualifications High ...
- Job Description Job Description Join our network of independent alteration professionals specializing in formalwear and tailoring. What You'll Do • Alter suits, tuxedos, dress pants, and formal jackets (hemming, tapering, shoulders, waist, sleeves) • Work with women...For contractorsLocal areaWork from homeAfternoon shift
- Job Description Worthington Armstrong Venture (WAVE), a joint venture of Worthington and Armstrong World Industries, has established worldwide leadership in the production of suspended ceiling systems. WAVE produces metal ceiling grids that can be combined with Armstrong...Local areaImmediate startWorldwideMonday to FridayFlexible hoursShift work
- ...CNC Machinist The GEM Group is an established leader in the manufacturing of valves and control systems, with a history extending over 50 years. This global company combines innovative technology with longstanding tradition. As a privately-owned business, GEM is recognized...Day shiftAfternoon shift
- Tool & Prototype Maker We are seeking a Tool & Prototype Maker responsible for preventive maintenance, repair of support equipment, and overall tool room operations. This role involves manufacturing engineered prototype parts, precision tools, jigs, molds, and dies ...
- CNC Programmer/Operator The CNC Programmer/Operator is responsible for reading and interpreting design blueprints, programming the CNC machines, and setup of the machine to desired specifications. This role requires expertise in machine operation, programming, and quality...
- Ready to earn more by making the next move in your career? Are you skilled at drilling and cutting instruments, creating precision metal parts and delivering on the specs of each and every project? If so, we have amazing opportunities for you to put that expertise into ...Temporary workWork experience placementImmediate start
$30 - $35 per hour
...Job Description Job Description Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM)...Hourly payFull timeContract workWork experience placementLocal areaRemote workWorldwideRelocation packageShift workDay shiftAfternoon shift$22 per hour
Job Description Job Description CTR Group is seeking a CNC Water Jet Operator for an Industrial Technology Company focused on robotics and automation in the Winston, GA area. Immediate opening and urgently hiring! A Direct-Hire Position! Pay Rate: $22 per Hour ...Hourly payImmediate startDay shift- ...Job Description Job Description We are seeking a CNC Mill Machinist for a fast paced manufacturing shop, we are a job shop, we do not do production, in this role you will set up CNC Mills according to blueprint specifications , selecting the appropriate fixtures, cutting...
$18 - $20 per hour
Job Description Job Description Job description:***NOTICE***: OUR COMPANY'S DRESS CODE POLICY AND PPE POLICY REQUIRE SHAVING FACIAL HAIR (SPECIFICALLY THE BEARD) AS IT POSES A SAFETY RISK IN CERTAIN WORK ENVIRONMENTS.Pay Rate: $18 -20/hourly (More depending on experience...Hourly payLocal areaShift work$23 per hour
...Job Title: CNC Machinist Location: Peachtree Corners, GA Employment: Temp (11 months) Industry: Manufacturing Compensation: $23.00/hr. Schedule: 40 hours/week – 1 st shift About the Opportunity: The Tool & Prototype Maker is responsible for preventive...Temporary workWorldwideShift work- Job Description Job Description We are looking for an EXPERIENCED Press Brake Operator to join our fabrication team. This is not an entry-level position. Applicants must have solid hands-on press brake experience, including machine setup, tooling selection, and blueprint...
$20.7 per hour
Job Description Job Description Company Description 3rd Shift: 10:30PM - 7:00AM Hourly Rate: $20.70/hour + $100 per pay period bonus Phoenix Stamping is a growing manufacturing company with a family oriented work environment, great pay and benefits! Our ...Hourly payNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Machinist *. Be the first to apply!


