Design Release Engineer -Drivelines/Axles

Stellantis

Design and Release Engineer (DRE) Driveline & Axle Product Release Center:

Acts as the owner of assigned driveline & axle components (axles, eDM gearbox, RDM, PTU, T-Case, prop shaft, half shaft, brackets, etc.). Executes product design, analysis, release and testing per technical infrastructure and FCA PCPC (the "how").

Responsible for the complete design and product delivery against technical requirements for the assigned components and products. Components and products may be complex, or include new technology, requiring related and relevant prior experience.
Develop subject matter expertise for select components or assemblies as assigned
Coach entry level engineers as required
Recognized as single point leadership contact for suppliers' product engineering.
Manages and tracks supplier product engineering activities and deliverables, including supplier test plans and test execution.
Prepares product engineering work plans in accordance with program and project timing and milestones.
Completes and documents advanced analysis and simulation of actuation mechanisms, including electro-mechanical and servo-hydraulic subsystems.
Executes engineering deliverables in adherence to technical infrastructure and product development process deliverables, reviews, sign-offs, and report-outs, including:
Develops technical requirements for components and subsystems of driveline & axles including purchased assemblies.
Completes all required technical source package documentation to support supplier quotes
Evaluates designs to the engineering best practice documents and completes supplier design reviews
Captures all lessons learned, and ensures timely execution of all calculations, analysis, and simulation in alignment with test plans and requirements
Develops DFMEAs and evaluates designs for failure modes robustness
Develops and executes component and subsystem DVP&R plans to validate all aspects of new designs and design changes, including DRBTR.
Supports the development of the system DVP&Rs
Develops tools, test procedures and acceptance criteria for driveline & axles, components, subassemblies and purchased assemblies
Collaborates appropriate design detailing and CAE activities
Ensures transfer functions and physics-based analysis are defined and documented for all actuation subsystems and components.
Delivers EBOM, models, drawings for components, subassemblies, and purchased assemblies
Generates engineering documentation in support of change management, including DRBFM
Delivers parts / hardware to pilot builds, including requisitions for prototypes and ED&D.
Collaborates with transmission and driveline systems subject matter experts, ACEs, DSEs, AEs, and other stakeholders to address and support any failures using the appropriate tools and processes.
Prepares status reports and presentations for management and CE organization
Supports manufacturing on production-related issues
Generates cost reduction ideas and develops and executes corresponding design and validation plans.
Participate in warranty/cost reduction meetings and develops solutions for warranty issues
Conducts root cause analysis of driveline & axles failures and identify the root cause/s
Conducts Layered Process Audits at supplier plants for assigned components.

Basic Qualifications:

Bachelor's degree in Mechanical/ Mechatronics/Electrical Engineering or related field
7+ years of engineering experience in the automotive industry or product engineering design, validation and engineering projects development with OEM and/or tier 1/2 supplier.
Experience or understanding in transmission, driveline & axles or related area
Thorough understanding of vehicle functions and general vehicle architecture
Understanding of typical automotive manufacturing and quality processes
Advanced English language skills 90% (Read and Write).
Leaderships, organization, planning, decision making and strategic thinking skills.
Ability to navigate complex stakeholder relationships and uncertainty and effect lasting change through effective communication and experience.
Proactive, Learning, self-driven, Teamwork oriented.
Efficient work under pressure and high communication skills.
Training in problem solving techniques.
Must be able to manage multiple complex projects simultaneously.
Must be able to lead and manage Suppliers.
Some travel required to Supplier and Corporate Engine/Transmission / Vehicle Assembly Plants -- including USA, Canada & Mexico, or Europe / Asia.
Assembly and computer aided design (NX / CATIA).
Experience with Design Failure Mode & Effects Analysis (DFMEA).
Experience with Design Verification Plan & Report (DVP&R)
Experience with Geometric Dimensioning and Tolerancing (GD&T)

Preferred Qualifications:

Other languages: Italian or French
Master's degree highly desired
Green/Black Belt in Shainin or DFSS
Knowledge of Stellantis Systems and/or products a plus
CAE/CFD experiences with Powertrain structures
Experience with the fundamentals of CAN communications
Experience with electric motors for automotive applications
Knowledge of Casting and Injection Molding processes.

Apply

Vacancy posted 4 days ago

Similar jobs that could be interesting for youBased on the Design Release Engineer -Drivelines/Axles in Auburn Hills, MI vacancy

Design Release Engineer - Hardware
...Description Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—... ...architecture EMC fundamentals Engineering best practices Design FMEA Technical drawing review and validation Quality &...
Suggested
For contractors
ALTEN Technology USA
Auburn Hills, MI
22 days ago
Design Release Engineer - Telematics / Infotainment
...Description Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—... ...for different infotainment features programs The Design & Release Engineer is responsible for the development of an assigned component...
Suggested
For contractors
Work at office
ALTEN Technology USA
Auburn Hills, MI
22 days ago
Wiring Design Release Engineer
...Job Description Job Description Job Summary The Wiring Design Release Engineer is a key position responsible for designing and battery pack internal electrical connectivity systems for internal ABS and external customer products. Responsibilities Lead harness...
Suggested
Temporary work
Immediate start
Flexible hours
American Battery Solutions
Lake Orion, MI
2 days ago
Design Release Engineer (DRE)- Fascia / Bumper / Grille
...Job Description Job Description The Design and Release Engineer- Fascia/Bumper/Grill will be responsible for developing components/systems from initial design concept through full volume production. The Design and Release Engineer will provide feasibility input for...
Suggested
Work at office
Prestige Engineering
Auburn Hills, MI
17 days ago
Design Release Engineer
...Role / Title: Engine Hardware Design & Release Duration: 12 Months Location: Auburn Hills, MI / Onsite Rate / Salary Range: $35/hour - $41/hour on W2 ; The rate may be negotiable based on experience, education, geographic location, and other factors. Job...
Suggested
Temporary work
Local area
Akkodis
Auburn Hills, MI
1 day ago
Design Release Engineer
...Overview A leading automotive organization is seeking a Design Release Engineer (DRE) to own and deliver exterior systems from initial concept through full‑volume production. This role is not a CAD designer position —the DRE is accountable for the part/system ownership...
HireTalent - Staffing & Recruiting Firm
Auburn Hills, MI
3 days ago
Design Release Engineer
...Talascend is currently seeking a Design Release Engineer for an opportunity in Auburn Hills, MI The Design Release Engineer for powertrain sealing components/systems is responsible for the design, development, and technical leadership in the creation, validation...
Work experience placement
Talascend
Auburn Hills, MI
1 day ago
Design Release Engineer - Vehicle Mechanisms
...Design Release Engineer - Intermediate Are you looking to work for a company that provides an innovative work environment, and your voice is heard? We have a position for a Design Release Engineer to work onsite at our client in Auburn Hills, MI (this is a contract...
Contract work
Temporary work
Immediate start
LER TechForce
Auburn Hills, MI
2 days ago
Tire Design Release Engineer
...Tire Design Release Engineer leads the development, validation, and release of tire systems for current and future vehicle programs. This role is responsible for ensuring tire performance meets all vehicle attribute targets including ride, handling, noise, durability,...
Stellantis
Auburn Hills, MI
4 days ago
ADAS Design Release Engineer
...The candidate will be responsible for the design, development and release of Advanced Driver Assist (ADAS) components - long/short range radar,... ...grave release activity (specifications, sourcing documents, engineering change management, requirements clarification and cross-...
Work at office
Stellantis
Auburn Hills, MI
1 day ago
Design and Release Engineer Hot End Exhaust
...This position will be responsible for the design, development, timing and production release of a vehicle line Exhaust System and/or underbody heat shields... ...product status to management. The Design Release Engineer will interact with suppliers and will work closely with...
Internship
Stellantis
Auburn Hills, MI
1 day ago
Design and Release Engineer (Body Exterior)
...BodyExterior Functional Plastics will be responsible for developingcomponents/systems from initial design concept through full volumeproduction. The Design and Release Engineer will provide feasibilityinput for developmentof designs from Product Design Office (PDO)concepts...
Work at office
InDepth Engineering Solutions
Pontiac, MI
1 day ago
Design Release Engineer
...challenges. Our services span AI, IT staffing, cloud computing, engineering, mobility, testing, and more. Certified with CMMI Level 3 and... ...Siemens NX ~5+ years of relevant experience working with design and manufacturing of sealing or related components V2...
Work experience placement
Local area
Worldwide
V2soft
Auburn Hills, MI
5 days ago
Design Release Engineer - Non-Rotating Components
..., ensuring timely delivery of cost-effective solutions to market. GENERAL JOB SUMMARY: The Non-Rotating Components Design Release Engineer is responsible for ensuring the successful design, development, validation, and release of structural engine components that...
Work at office
Local area
Kratos Defense
Auburn Hills, MI
1 day ago
Design Release Engineer Battery Degas and Simultaneous Engineering
...This role is for a Design and Release engineer to of Degas Systems and components for high voltage batteries in Stellantis’ vehicles. This includes components like Degas Valves, Pre-filters, & Degas Shrouds. This role would include continued design and development for...
Immediate start
Stellantis
Auburn Hills, MI
3 days ago
Design Release Engineer - Powercell components
...Design Release Engineer for Internal Combustion Cranktrain Components The Design Release Engineer for Internal combustion Cranktrain components is responsible for the design, development, and technical leadership in the creation, validation, and release of these components...
Work experience placement
InDepth Engineering Solutions
Auburn Hills, MI
5 days ago
Design Release Engineer - Door and Trim Center Console
...The Design Release Engineer - Door and Trim Center Console will: Interface with Vehicle Engineering, suppliers, Purchasing, Quality and Assembly Plants Manage product performance to meet functional, cost, weight, and investment targets Oversee product...
Stellantis
Auburn Hills, MI
3 days ago
Design Release Engineer- Intermediate and Senior
...Job Title: Design Release Engineer- Intermediate and Senior Location: Auburn Hills, MI ~1-3 years of experience in HVAC compressors and/or A/C line design/development. ~ Other related design experience (Engine cooling, Aero-Thermal) also a plus. ~ Very...
Jobs via Dice
Pontiac, MI
5 days ago
Design Release Engineer
...Design Release Engineer Location: Auburn Hills, Michigan The Design Release Engineer is responsible to lead the development of ECU/sensor design for the ADAS and Chassis features while working with suppliers and Engineering Support teams that include systems, wiring...
Commserve Technologies
Auburn Hills, MI
3 days ago
Design Release Engineer - Electric Drive Modules
...seeking a skilled and motivated Automotive Engineer to join our Electric Drive Module (EDM)... ...team. This role is focused on managing the release of components and systems within the EDM.... ...in the automotive field with previous design release experience. Key Responsibilities...
Stellantis
Auburn Hills, MI
3 days ago
Design Release Engineer - Battery Degas and Simultaneous Engineering
...This role is for a Design and Release engineer to of Degas Systems and components for high voltage batteries in Stellantis' vehicles. This includes components like Degas Valves, Pre-filters, & Degas Shrouds. This role would include continued design and development for...
Work experience placement
Stellantis
Auburn Hills, MI
1 day ago
Design Release Engineer - Front Covers, Valve Covers, Oil Pans
...The Candidate will lead the design of Front Covers, Valve Covers, and Oil Pans ensuring alignment with engine and vehicle requirements, Develop and refine concepts for Oil... ...will also be responsible for the following: Release & Program Management Manage design and...
Stellantis
Auburn Hills, MI
4 days ago
Design Release Engineer - Automatic Transmissions
...Job Description The Design and Release Engineer will be responsible for developing components/systems from initial design concept through full volume production. The Design and Release Engineer will provide feasibility input for development of designs from Product...
Work at office
InDepth Engineering Solutions
Auburn Hills, MI
5 days ago
Design Release Engineer
...As an Automotive Cooling System Design and Release Engineer, you will be a key member of our dynamic team focused on designing, developing, validating, and releasing advanced cooling components for electrified vehicles. These critical components, including cooling module...
Stellantis
Auburn Hills, MI
1 day ago
Mule Wiring Design Release Engineer
Job Title: Mule Wiring Design Release Engineer Location: Auburn Hills, Michigan What you’ll be doing: The Mule Wiring Design & Release Engineer (DRE) is responsible to lead the design of wire harness and electrical distribution systems while working with...
CommServe Technologies Inc
Auburn Hills, MI
6 days ago
Design and Release Engineer
...Design And Release Engineer We are seeking an intermediate Design and Release Engineer. This role involves working closely with cross-functional teams to contribute to the serial life production of Electric Drive Module Gear Reducers. The ideal candidate should have...
Redolent
Auburn Hills, MI
5 days ago
Design Release Engineer (Cockpit Components)
...Technologies we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world's... ...recruiting for a below position Job Title : Design and Release Engineer (Door Trims and Console) Location: Auburn Hills,...
Full time
Tata Technologies
Auburn Hills, MI
4 days ago
Chassis Mounts Design Release Engineer
...Product Engineer - Chassis Mounts is responsible for system design, development, and engineering release of powertrain mounts, differential mounts, EDM mounts, body mounts, and adaptor brackets. The engineer will be responsible for the executing a work plan to achieve...
Work at office
Stellantis
Auburn Hills, MI
5 days ago
Active Chassis & Actuation Design Release Engineer
...The Active Chassis & Actuation Design and Release Engineer is responsible for leading the hardware design, packaging, development, and release of the brake system module(s) and brake actuation components (including electric, vacuum and hydraulic brake boosters & vacuum...
Stellantis
Auburn Hills, MI
4 days ago
Design Release Engineer - Intermediate
...Design Release Engineer, Powercell Components The Design Release Engineer for Internal combustion Cranktrain components is responsible for the design, development, and technical leadership in the creation, validation, and release of these components for company vehicles...
Abacus
Auburn Hills, MI
5 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Design Release Engineer -Drivelines/Axles. Be the first to apply!