Fluxcore Welders

TREO STAFFING LLC

Harvey, LA

Weld Components in flat, vertical, and overhead positions.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
Select and install torches, torch tips, filler rods, and flux, according to welding chart
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as flux-cored arc
Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
Preheat workpieces prior to welding or bending, using torches or heating furnaces.
Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
Detect faulty operation of equipment or defective materials and notify supervisors.
Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
Operate metal shaping, straightening, and bending machines, such as brakes and shears.
Set up and use ladders and scaffolding as necessary to complete work.
Hammer out bulges or bends in metal workpieces.
Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment, such as flame-cutting torches or plasma-arc equipment.
Gouge metals

Please visit our careers page to see more job opportunities.

Apply

Vacancy posted 5 days ago

Similar jobs that could be interesting for youBased on the Fluxcore Welders in Harvey, LA vacancy

Offshore Pipe Welder (6G)
...Welder Position Main Purpose: To perform job functions required and assigned in the fabrication of structural/piping materials per the contract/job specifications and quality assurance requirements/fitting procedures and established ISO/QC program standards. The...
Suggested
Full time
Contract work
Visa sponsorship
Work visa
Gulf Island LLC
Harvey, LA
1 day ago
Marine Structural Welder (Stick) — Waterfront Facility
Stewart Construction in Harvey, Louisiana is seeking a Structural Welder to perform stick welding on carbon steel at their industrial facility. The position requires reliability, a strong work ethic, and the ability to pass various qualifications. Ideal candidates will...
Suggested
Stewart-Construction
Harvey, LA
4 days ago
Marine Structural Welder/Fitter - Pipe & Steel
...Stewart-Construction is seeking a Combo Welder/Fitter for marine construction projects. This role involves welding carbon steel and working with structural steel in various locations along the Mississippi River and at our yard in Harvey, Louisiana. Qualified candidates...
Suggested
Full time
Stewart Construction
Harvey, LA
2 days ago
Welder-(Temp to perm)
$920 per month
...Combo Welder Harvey, LA 70058 Industry: Skillset Job Number: 56597367 Job Description Welder $920 +OT WEEKLY Join Savard Personnel Group - where your skills are valued! Key requirements: Perform welding and cutting tasks using Stick Flux-Cored (FCAW), and...
Suggested
Permanent employment
Temporary work
Monday to Friday
Shift work
Savard Labor
Harvey, LA
4 days ago
Combo Welder/Fitter (Field)
...Combo Welder/Fitter (Structural/Pipe) - Marine Construction Summary Description: The basic function of a Welder (Structural / Pipe) is to weld carbon steel using various welding techniques, tools, and processes and to layout, cut, align and fit together structural...
Suggested
Full time
Remote work
Stewart Construction
Harvey, LA
1 day ago
Ironworker (Welder and Fabricator)
$36.38 per hour
...Ironworker (Welder and Fabricator) Location: Chalmette, Louisiana The Iron Worker is responsible for assembling, installing, maintaining, and repairing complicated lay-outs, using equipment such as tanks, supports, buildings, hoppers, sheet metal patterns, etc....
Hourly pay
Work experience placement
Local area
Shift work
Weekend work
Florida Crystals
Chalmette, LA
2 days ago
Structural Welder, Stick
Structural Welder, Stick Summary Description: The basic function of a Structural Welder is to stick weld carbon steel. Worksite Location(s): Industrial facility on the waterfront in Belle Chasse, Louisiana. Company Description: Stewart Construction, LLC provides a wide...
Full time
Stewart-Construction
Harvey, LA
4 days ago
Welder (Fabrication Shop)
...Welder (Structural/Pipe) - Fabrication Shop Summary Description: The basic function of a Welder (Structural / Pipe) is to weld carbon steel using various welding techniques, tools, and processes. Worksite Location(s): Fabrication shop in Harvey, Louisiana...
Full time
Remote work
Stewart Construction
Harvey, LA
3 days ago
Shipyard Welders Needed
...First Class Fluxcore Structural Welders We are currently hiring first class fluxcore structural welders for a project in Panama City, FL shipyard. Note this position is open to U.S. citizens only due to government contract. Must pass hands on weld test (2G, 3G...
Contract work
Currently hiring
Labor One Staffing
New Orleans, LA
2 days ago
Pipe Welders
$30 - $38 per hour
...Job Description Job Description Join TREO Staffing, LLC as a Full-Time Pipe Welder and immerse yourself in an exciting and rewarding career in Harvey, LA. This onsite position allows you to work on diverse projects, enhancing your skills in a professional and traditional...
Hourly pay
Full time
TREO Staffing, LLC
Harvey, LA
16 days ago
Tack Welder (Short-Arc GMAW) for Shipbuilding
...Bollinger Shipyards in Metairie, Louisiana, is seeking a Short Arc (GMAW) Tack Welder to join their team. The ideal candidate will have at least 3 months of tack welding experience and should be proficient in Short-Arc techniques. The responsibilities include welding...
Bollinger Shipyards
Metairie, LA
3 days ago
TIG Welder
...Are you an experienced TIG Welder? Laitram Machinery is currently seeking a TIG Welder. This individual will be primarily responsible for fitting and welding stainless steel seafood processing equipment (as well as other mechanical equipment fabricated primarily from...
Work at office
Worldwide
Laitram
New Orleans, LA
1 day ago
Shipyard Stick Welders
1) Welds together metal components of products, such as ships and barges as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. 2) Connects cables from welding unit to obtain amperage, voltage...
TREO STAFFING LLC
New Orleans, LA
5 days ago
Welder
...Welder Description How We Care At Textron Systems, our talented people make us successful. We promote an inclusive environment where we value individuality, differences, and unique perspectives. Our Company is committed to offering employees opportunities...
Full time
Contract work
Worldwide
Relocation package
Flexible hours
Shift work
Day shift
Textron
New Orleans, LA
4 days ago
Welder - Industrial Construction
...innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. Welder - Combination This person must be able to join metal parts, such as pipe or metal plates as specified by layout, blueprints,...
Work visa
Austin Industries
New Orleans, LA
7 days ago
Fabricator
Career Opportunities with GHX Industrial A great place to work. Careers at GHX Industrial Are you ready for new challenges and new opportunities? Join our team! Current job opportunities are posted here as they become available. GHX , a SunSource company is the leader...
GHX Industrial
Harvey, LA
5 days ago
Welder / Welding / Fabrication Welder
...Welders - Destrehan, LA The Welder is responsible for performing high-quality welding and fabrication work on marine and civil construction projects. This includes welding and assembling structural steel, pipework, and other metal components used in infrastructure such...
For contractors
Bo-Mac Contractors, LTD
Metairie, LA
4 days ago
Weekend Welder
...employer of choice! Work with us on the Mississippi River and in the Gulf Region. Maintenance Dredging I, LLC is seeking experienced Welders to perform essential duties aboard its dredges. Requirements: pass pre-employment drug screen and physical and background...
Local area
Weekend work
Maintenance Dredging I, LLC
New Orleans, LA
2 days ago
Senior Production Welder
$28.75 - $110 per hour
...About the job Senior Aluminum Welder Job Summary Venture Dynamics- Gulf is hiring for Senior Aluminum Welders in New Orlean, LA. Paying $28.75hr $110 per diem. You will be responsible for performing high-quality aluminum welding and fabrication while leading...
Daily paid
Venture Dynamics Inc
New Orleans, LA
2 days ago
Welder - 1st Shift - Full Time
...Welder - Tubing Description Who We Are Textron Systems is part of Textron, a $14 billion, multi-industry company employing 35,000 talented makers, thinkers, creators and doers worldwide. We make things that fly, hover, zoom and launch. Things that move people...
Full time
Worldwide
Relocation package
Flexible hours
Shift work
Day shift
Textron
New Orleans, LA
3 days ago
Welder-Flex
Job Requirements We believe people should love what they do – in this role, you will be responsible for: Utilize GTAW (Gas Tungsten Arc Welding) methods to weld tubing components with exceptional precision. Comprehensive knowledge of tubing materials and their...
Work experience placement
Worldwide
Relocation package
Flexible hours
LED FastStart
New Orleans, LA
5 days ago
Chassis Mechanic and Welder
$15 - $35 per hour
...chassis by installing and repairing brakes, suspension parts, pneumatic and hydraulic system parts. This colleague must be a certified welder. Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM This position is for our Chalmette, LA branch at 100 Intermodal Dr,...
Hourly pay
Worldwide
Monday to Friday
Flexible hours
Shift work
Depot Connect International
Chalmette, LA
1 day ago
Local Welder (South Louisiana and Surrounding Area)
...are involved. Typically, they will work closely with the Welding Shop Foreman, Yard Superintendent, Dredge Captains, Deck Captains, Welders, Helpers, and other skilled crafts persons. The incumbent must support the guiding beliefs and core values of Orion which are...
Temporary work
Local area
Immediate start
Flexible hours
Orion Corporation
Metairie, LA
5 days ago
Structural 6GR Welder - Multi-Process
A leading staffing company is seeking a Structural 6GR Welder in Belle Chasse, Louisiana. The ideal candidate will demonstrate advanced welding skills in MIG, Flux Core, and TIG processes, adept at producing high-quality welds on heavy structural steel. Responsibilities...
Contract work
Temporary work
TempWorks Software Incorporated
Belle Chasse, LA
2 days ago
Fabricator I: Precision Gaskets & Hose Assemblies
A leading industrial firm seeks a Fabricator I to assist in various shop tasks related to gaskets and hoses in Harvey, Louisiana. The position requires a high school diploma and ideally one year of shop experience. Responsibilities include inventory management, operation...
GHX Industrial
Harvey, LA
5 days ago
Pipe Fitters
A Pipe Fitter performs layout, fabrication, installation, testing, and repair of pipe systems. The requirements for the position are as follows: Must have a minimum of 3 months of experience pipe fitting Carbon Steel; and Able to successfully demonstrate the ability...
TREO STAFFING LLC
Harvey, LA
5 days ago
Aviation Welder
...team at JRB New Orleans, where we support critical aviation operations for military and reserve forces. Job Summary: The Aviation Welder will perform precision welding, fabrication, and repair tasks on aircraft structures, components, and ground support equipment....
Kay and Associates, Inc.
New Orleans, LA
1 day ago
Structural 6GR Welder
Job Summary FlexForce Pros is seeking a highly skilled Structural 6GR Welder with strong mechanical aptitude and experience performing high-quality welds on heavy structural steel components. This role requires advanced proficiency in GMAW (MIG), FCAW (Flux Core), and...
Daily paid
Temporary work
Casual work
Monday to Friday
TempWorks Software Incorporated
Belle Chasse, LA
2 days ago
Supreme Integrated Technology - Welder/Fitter - Level 2
...smaller company you have opportunity to be involved in every aspect of a project and make an impact from start to finish. The Welder/Fitter - Level 2 is responsible for performing welding processes accurately, using drawings, specifications, and verbal instructions...
Employee Owned Holdings
Harahan, LA
1 day ago
WELDER COMBINATION - Austin Industrial - Small Cap Chalmette, LA
...Welder Combination Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical...
Work visa
Austin External
Chalmette, LA
3 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Fluxcore Welders. Be the first to apply!