Skilled Laborers
S T Wooten Corporation
Job Description
Job Description
JOB LOCATION: Apex, NC and Sanford, NC areas
AVAILABLE POSITIONS: 6
PRIMARY FUNCTION:
Perform general construction tasks involving physical labor at construction projects and plants. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, cleaning up rubble and debris.
ESSENTIAL DUTIES:
Heavy Grade Division
Operate jackhammers, drills and other power tools as required.
Position, join, align, and seal structural components, such as concrete wall sections and pipes.
Shovel cement and other materials into portable cement mixers; and mix, pour, and spread concrete.
Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials.
Spray materials such as water, sand, steam, vinyl, paint, or stucco through hoses to clean, coat, or seal surfaces.
Tend machines that pump concrete, grout, cement, sand, plaster or stucco through spray-guns for application to ceilings and walls.
Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials such as asphalt.
Lubricate, clean, and repair machinery, equipment, and tools.
Apply caulking compounds by hand or using caulking guns.
Clean and prepare construction sites to eliminate possible hazards.
Control traffic passing near, in, and around work zones.
Dig ditches or trenches, backfill excavations, and compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, and rakes.
Erect and disassemble scaffolding, shoring, braces, traffic barricades, ramps, and other temporary structures.
Load, unload building materials, machinery, and tools.
Mix ingredients to create compounds for covering or cleaning surfaces.
Learn and follow safety regulations.
Provide assistance to craft workers, such as carpenters, plasterers, and masons.
Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
Perform additional duties as required or directed by their immediate supervisor or other manager.
MINIMUM REQUIREMENTS:
Education:
- Must be a minimum of 18 years of age.
Work Experience:
- Must have a good work ethic, be on time and be dependable .
- Minimum of 1-year experience preferred but not required.
- Must be available to work various hours including days, nights and weekends.
- Prefer experience with DOT projects.
- Heavy Highway, erosion control experience and ability to check grade is a plus.
- Candidate must be willing to shovel, rake, flag traffic and etc.
- Must have dependable transportation to and from work.
- Potential candidate should be eager to learn and advance.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.
$14.16 - $32.88 per hour
...or filling preferred ~1 to 3 years' experience in a production driven environment ~ Forklift experience preferred ~ Computer Skills, attention to detail, ability to count and read, time management ~ Must be able to communication and work with a team ~ Mechanically...SuggestedFull time- ...properly. RESPONSIBILITIES Your main focus: Meet or exceed labor standards/KPIs. Identify opportunities for continuous process... ...workplace gives a company strength. The combination of unique skills, abilities, experiences and backgrounds creates an environment...Suggested
$25 - $35 per hour
Folder Gluer Operator $25 - $35 per hour | Sanford, NC | On-site | Permanent Folder Gluer Operator Opportunity A bit about us: We are partnering with a well-established, growing manufacturer in the pharmaceutical packaging and printing industry that is looking to add an...SuggestedHourly payPermanent employmentLocal areaMonday to ThursdayAfternoon shift- ...certification if not. Core Competencies: Communication skills Problem-solving skills Knowledge of bridge construction equipment... ...is an Equal Opportunity/Affirmative Action Employer * Labor Activities- Physical Requirements Must be able to lift more...SuggestedFor contractors
- ...bend, stoop, stand for long periods, climb stairs and ladders. Work in all weather conditions. A team player with good communication skills - written and verbally. Computer literate. Proficient in MS Word and Excel preferred. Noble Oil Services, Inc. an environmental...SuggestedImmediate startShift workNight shiftAfternoon shift
- ...and safety standards. Core Competencies Effective communication skills; able to understand and speak English. Knowledge of OSHA safety... ...is an Equal Opportunity/Affirmative Action Employer * Labor Activities- Physical Requirements Must be able to lift more than...Temporary workFor contractors
- Waffle House Cook Position At Waffle House, we are not in the food business. We are in the People Business and we are hiring immediately for full time and part time cooks for all shifts. Being in the People Business, we don't just take care of our customers. We take...Weekly payFull timePart timeImmediate startAll shiftsFlexible hoursNight shiftWeekend workDay shift
- ...to work outdoors in heat and direct sunlight for 8+ hours per day. Must have transportation to get to job site. Preferred skills: ~ High School diploma and on-the-job training preferred. Equal Opportunity Employer/Veterans/Disability Wharton-Smith...Contract workImmediate start
$22 per hour
...regular maintenance - including cleaning, greasing and fluid levels. Report any issues to team leader or supervisor. Basic mechanical skills using hand tools, power tools, hand trucks and pallet jacks. Measure, inspectandset up tolerances using calipers and measuring...Hourly payFull timeWork experience placementWorldwideRelocationVisa sponsorshipRelocation packageMonday to FridayFlexible hoursShift workAfternoon shift- ...high standards and consistently honors policies, procedures, and work requirements. Scrupulously ensures all work is correct.Required Skills and EducationHigh School Diploma or GED.About Dauch:Dauch Corporation is a premier Driveline and Metal Forming supplier serving the...
- ...join our team.Requirements:Operating a polar cutting machine.Mechanical aptitudeShould be good with measurement tools.Basic computer skills preferred.Should be able to stand all day and use both arms with built-in breaks.Should be able to lift to 25 lb....
- CNC Programmer Who We Are: Integrated Power Services (IPS) is the leading North American solution provider for power management, electro-mechanical and rotating assets. Serving customers across a wide range of industries, including power generation, utilities, water...
- Benefits: Flexible schedule Opportunity for advancement Our franchise organization, Fields Corral, LLC dba Golden Corral, is currently seeking energetic, friendly individuals to join our team! The Baker has the important responsibility of preparing yeast rolls...Local areaFlexible hoursWeekend work
$21 per hour
...CNC Machinist Put your CNC skills to work creating precision parts that make a difference. Join a growing manufacturing company known for producing high-quality precision-machined components for a variety of industries. Using advanced CNC technology and a commitment...Weekly payFull timeTemporary workMonday to FridayDay shift- Responsive Recruiter Our franchise organization, Fields Corral, LLC dba Golden Corral, is currently seeking energetic, friendly individuals to join our team! The Baker has the important responsibility of preparing yeast rolls, cakes, pies, specialty desserts and ...Local areaWeekend work
- CNC Machinist Who We Are: Integrated Power Services (IPS) is the leading North American solution provider for power management, electro-mechanical and rotating assets. Serving customers across a wide range of industries, including power generation, utilities, water...
- Job Opportunity At Dairy QueenWe strive to create positive memories for all our fans so we are looking for positive, energetic employees who are passionate about the Dairy Queen® brand and delivering exceptional customer service. If you enjoy working in a fun, fast paced...Local area
- Dairy Queen - 2831 South Horner Boulevard - Responsibilities: Be an ambassador of the Dairy Queen brand and be professional in every aspect of performance; Assemble and prepare soft serve and Blizzard cakes, including decorating with icing, gel, drawings, decorating kits...
- NEW HIGHER PAY! $0.63/mile base plus performance bonus up to $.09!!! At EPES Transport, we're hiring experienced CDL-A drivers for short haul routes that keep you moving and get you home on a schedule you can count on. If you're ready for consistent freight, competitive...Weekly payDaily paidWeekend work
$1,200 - $1,400 per week
Don t Miss This Opportunity! Call Largest Driver Pay Raise In 90-Year History Job Description: CDL-A Short Haul Truck Driver Jobs NEW PAY RAISE! Earn .60 CPM + up to .09 CPM Performance Pay At EPES Transport, you can earn top pay with weekly...Weekly payDaily paid$18 per hour
...and equity in all of our people practices. The hourly pay for this position, which is dependent upon experience, qualifications and skills, is estimated to be $18 per hour. Code: RT Code: NW Why Westinghouse? Our benefits package is tailored to meet the...Hourly pay- ...This position requires a multi-faceted track and wheel driven heavy equipment operator that can safely, productively, and with proven skill, control, maneuver, and navigate numerous types of construction equipment to a high degree of grading and excavation accuracy....Temporary workFlexible hoursNight shiftWeekend work
- ...Job Description Job Description Job Description We are looking for a skilled Machine Operator to set up, maintain and operate machinery. You’ll ensure the interminable and efficient running of production. A great machine operator is reliable and able to work with...Shift work
$21.17 per hour
Requisition ID 30714 -Posted 07/24/2026 - United States - Moncure, NC - Production Looking for a rewarding career with a company that values people, growth, sustainability, and teamwork? Join our Moncure team as a Production Utility Operator! This role is on a 12-hour rotating...Hourly payLocal areaNight shiftRotating shift- ...Opportunity Position Summary: Sunrock is seeking a highly skilled Heavy Equipment Operator to join our grading and utility... ...supervision Ability to mentor and guide other operators or laborers Strong communication and leadership presence High-level understanding...Weekly payExtra incomeApprenticeshipLocal areaRelocation package
- Job Description Job Description Description: Duties/Responsibilities: Setup, Load, operate CNC machines to produce tools/dies Knowledge of Master CAM 3D to create CNC programs. Experience on HAAS VM6/Hurco VM-ONE mill machine & Hurco TM8i Lathe Machine. ...Apprenticeship
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Skilled Laborers. Be the first to apply!


