Fire Alarms/SCADA Systems Mechanic
King & George, LLC
Fire Alarms/SCADA Systems Mechanic
Position / Title: Fire Alarms/SCADA Systems Mechanic
Responsibilities: (Other duties may be assigned)
- Installs, repairs, and inspects smoke and fire suppressions systems; inspects, tests, and repairs fire alarm wiring, fire alarm panels and peripheral equipment.
- Identifies hazards, defects, and the need for adjustment or repair.
- Inspect, repair or replace smoke/heat detectors and sprinkler heads; repair and test dry/wet systems; tests fire alarm systems using appropriate diagnostic programs and equipment.
- Performs tests on fire pumps and standpipe systems.
- Extensive use of analog and digital electronics knowledge and training.
- Extensive work with cathodic protection, communications and grounding systems.
- Ensures that work is in accordance with relevant codes.
- Performs other general building maintenance as assigned.
- Works job assignments, researches and requisitions materials, and prepares necessary documents and reports.
- Requires working scheduled and unscheduled overtime work including areas other than respective skilled trade.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Must have ability to meet the requirements for issuance of a computer network account (favorable National Agency Check and successfully complete computer security training)
Education and/or Experience:
- Any personnel performing work on fire alarm or suppression systems shall be NICET Level 3 Certified.
- Four years related experience and/or training; or equivalent combination of education and experience.
- Shall have a minimum of three (3) years' experience in healthcare facilities.
- Vendor certifications and/or state licensing in alarm systems highly desired.
Language Skills
- Ability to read and comprehend simple instructions, short correspondence, and memos.
- Ability to write simple correspondence.
- Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to deal with problems involving several concrete variables in standardized situations.
Physical Requirements
- While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl.
- The employee frequently is required to talk or hear.
- The employee must occasionally lift and/or move up to 50 pounds.
- The employee must occasionally lift and/or move up to 100 pounds.
- Must be able to work in a sitting position for 8 or more hours per day.
- Must be able to lift up to 10 pounds on a regular basis and up to 50 pounds as needed
Work Environment
- While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles.
- The employee is occasionally exposed to high, precarious places.
- The noise level in the work environment is usually moderate.
Special Qualifications/Requirements:
- Must be able to successfully pass, as required, a federal, state, or local government's background investigation
Disclaimer:
The duties and responsibilities described are not a comprehensive list, and additional tasks may be assigned to the employee from time to time, or the scope of the job may change as necessitated by business demands.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
We maintain a drug-free workplace and perform pre-employment substance abuse testing.
King & George, LLC- ...electrical power, distribution, control, alarm, generator, and research-and-development systems at Tyndall Air Force Base. The... ...switches, circuit breakers, and mechanical/electronic systems; adjust relays... ..., power and control circuits, fire alarm, UPS, lightning protection,...Fire alarmFor contractorsLocal areaFlexible hours
$15.75 - $23.67 per hour
...role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections... ...service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering...SuggestedDaily paidMinimum wagePrice workFull timeTemporary workPart timeLocal areaFlexible hours- ...role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections... ...service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering...SuggestedDaily paidTemporary workLocal areaFlexible hours
- ...our team. Barbaricum is seeking a EOD Trainer Maintenance Technician for the anticipated Product Manager Robotic and Autonomous Systems (PdM RGCS) Contractor Logistics Support (CLS) effort at Fort Leonard Wood, MO. The EOD Trainer Maintenance Technician performs a...SuggestedFor contractors
- Job Title Job Description Help Responds to the site of accidents or other emergencies involving injury, illness, or potential environmental risks. Assesses condition of patient(s) and selects from a variety of protocols one or several that are deemed appropriate...Suggested
- ...diagnostics, maintenance, and repairs on automotive vehicles, including engine, transmission, brake, and electrical systems. Inspect vehicles for mechanical problems and determine necessary repairs. Use computerized diagnostic equipment to identify issues accurately...
$20 - $35 per hour
...Pay Range: $20-$35 per hour in total compensation, which includes an hourly base plus additional earnings through a flag/flat-rate system. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical...Bi-weekly payHourly payPrice workLocal areaImmediate start- ...team. Barbaricum is seeking a Senior Trainer Maintenance Technician for the anticipated Product Manager Robotic and Autonomous Systems (PdM RGCS) Contractor Logistics Support (CLS) effort at Fort Leonard Wood, MO. The Senior Trainer Maintenance Technician leads training...For contractors
$27 - $40 per hour
Automotive Technician Powered by The Sun Auto Network, Plaza Tire Service delivers trusted tire and automotive service backed by nearly 100 years of automotive excellence. With certified technicians and over 500 locations nationwide, we provide expert care through Clarity...Bi-weekly payHourly payLocal areaImmediate start- This role involves performing basic automotive services such as oil changes, tire mounting/dismounting, wheel balancing, alignments, and fluid flushes. Responsibilities include safely transporting customers, picking up parts, conducting vehicle inspections, and maintaining...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Fire Alarms/SCADA Systems Mechanic. Be the first to apply!


