Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Facilities Maintenance Technician

$42.55 - $51.75 per hour

Advanced Molding Technologies, LLC

Compensation: $42.55 to $51.75 per hour (inclusive of $37.00 to $45.00 hourly base plus 15% shift premium for 3rd shift). Starting pay is based on relevant experience, skills, and qualifications. Candidates whose backgrounds more closely align with the position’s requirements and who bring greater directly related experience may be considered toward the upper end of the range.

Schedule: 3rd shift (10:00pm - 6:30am Sunday through Thursday)

Department: Processing

Reports To: Process Technician Supervisor

FLSA Status: Non-Exempt

Position Summary:

The Senior Process Technician serves as a technical expert in injection molding setup, troubleshooting, and process optimization. This position ensures molding processes operate within validated and documented parameters while supporting productivity, quality, and safety objectives in a regulated medical device manufacturing environment. The Senior Process Technician provides advanced technical support, leads troubleshooting efforts, assists with development samples when needed, and mentors Process Technicians I and II. This role requires consistent compliance with ISO 13485, ISO 9001, cGMP, and all company Quality Management System (QMS) procedures.

Essential Duties and Responsibilities:

  • Perform and verify setups as needed, including both routine and complex molding setups, ensuring adherence to approved parameters and work instructions.
  • Assist and mentor Process Technician I and II employees during setups and startups, providing guidance and verification to ensure correct procedures are followed.
  • Conduct startups for all production runs using validated parameters, including post-maintenance Tooling Work Order (TWO) runs, verifying that tooling repairs or adjustments have corrected the issue and that the process is stable before release to production.
  • Troubleshoot complex molding, tooling, and equipment issues to determine root cause and implement corrective actions or escalate appropriately.
  • Collaborate closely with Engineering, Quality, and Maintenance to resolve process deviations, nonconformances, and equipment-related issues.
  • Review and verify accuracy of Standard Work Instructions (SWIs), Master Process Sheets, and process documentation; coordinate with Engineering or Document Control when corrections or updates are needed.
  • Support development sampling and validation activities as assigned, assisting with setup, documentation, and process adjustments under Engineering or Process Development direction.
  • Apply scientific molding principles and data-driven methods during troubleshooting and process improvement efforts.
  • Ensure all process-related documentation is complete, accurate, and compliant with GDP and QMS standards.
  • Write, review, and track Tooling Work Orders (TWOs) for tooling or process issues requiring maintenance or engineering attention.
  • Verify that all relevant process and maintenance documentation is completed correctly by Process Technicians I and II.
  • Support QMS initiatives including CAPA, NCR investigations, internal audit readiness, and continuous improvement documentation.
  • Participate in or lead small-scale continuous improvement projects to enhance efficiency, product quality, or safety.
  • Partner with Production Supervisors to ensure smooth shift transitions, effective communication, and adherence to production schedules.
  • Demonstrate and enforce proper cleanroom and contamination control procedures in both cleanroom and general production areas.
  • Other duties as assigned

Knowledge, Skills, and Abilities:

  • Expert-level understanding of injection molding processes, tooling, materials, and auxiliary equipment.
  • Strong knowledge of ISO 13485, ISO 9001, cGMP, and QMS documentation requirements.
  • Proficiency in root-cause analysis and troubleshooting techniques.
  • Ability to interpret process data, setup sheets, validation reports, and engineering drawings.
  • Working knowledge of scientific molding principles, data collection, and process control.
  • Demonstrated leadership, mentoring, and team collaboration skills.
  • Strong attention to detail and accuracy in documentation and communication.
  • Effective cross-functional collaboration with Engineering, Quality, and Production departments.
  • Commitment to workplace safety, product quality, and regulatory compliance.

Education and Experience Requirements:

  • High school diploma or equivalent required; associate or technical degree in plastics, manufacturing, or engineering technology preferred.
  • 5 or more years of experience in injection molding, including process setup, troubleshooting, and optimization.
  • Experience in a medical device or other regulated manufacturing environment required.
  • Completion of AIM Molding II required (or obtained within defined timeframe).

Physical Requirements:

  • Ability to stand and walk for extended periods throughout the shift (up to 12 hours).
  • Frequent bending, reaching, twisting, and lifting of objects up to 50 lbs independently.
  • Ability to perform transport, installation, and alignment of molds, tooling, and auxiliary equipment that may weigh several hundred to several thousand pounds using forklifts, overhead hoists/cranes, and other approved lifting devices.
  • Safely operate a forklift, pallet jacks, hoists/overhead cranes, and other material-handling equipment (training and certification performed onsite).
  • Requires manual dexterity for working with small parts, tools, and precision instruments.
  • Ability to work in both cleanroom and general production environments while wearing required PPE and following contamination control and safety procedures.
  • Visual acuity sufficient to inspect molded parts and read gauges, indicators, and digital displays.
  • Exposure to moderate heat, noise, and occasional airborne particulates during purging, maintenance, or repair activities.
  • Must remain alert and safety-focused when working around moving machinery, overhead loads, and energized equipment.

Benefits:

Medical, dental, and vision insurance with employer contributions, Health Savings Account (HSA) with employer contributions, Health Care and Dependent Care Flexible Spending Accounts (FSAs), employer-paid life and disability insurance, optional supplemental insurance, Employee Assistance Program (EAP), wellness resources and employee discounts, 401(k) retirement savings plan with company match, profit-sharing program, retirement planning resources, tuition reimbursement, generous paid time off (PTO), nine paid holidays, paid community service days, paid jury duty leave, employee appreciation events, and professional growth and advancement opportunities.

Advanced Molding Technologies is an Equal Opportunity Employer. We make employment decisions based on job-related qualifications without regard to race, color, creed, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, marital status, familial status, disability, status with regard to public assistance, membership or activity in a local human rights commission, veteran status, genetic information, or any other status protected by applicable law. We are committed to a workplace free from discrimination, harassment, and retaliation and provide reasonable accommodations for qualified applicants and employees with disabilities and for sincerely held religious beliefs, as required by law.

Compensation details: 42.55-51.75 Hourly Wage

PI4136aa98d211-31181-42063032

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Facilities Maintenance Technician in Circle Pines, MN vacancy
  •  ...posted on behalf of Distinctive Staffing Solutions by Top Echelon. Overview: We are seeking a highly skilled Facilities Technician IV to oversee the maintenance and repair of our facilities, systems, and equipment. This role is crucial for ensuring our operations run... 
    Suggested

    Top Echelon

    Lino Lakes, MN
    22 days ago
  • $20 - $30 per hour

     ...yourself to develop both personally and professionally.  We are seeking talented individuals who are interested in future Maintenance Technician opportunities in the Minneapolis - Saint Paul metro area. Position Summary: As a Maintenance Technician, you will be... 
    Suggested
    Full time
    Temporary work
    Local area
    Flexible hours

    Dominium Management Services, LLC

    Blaine, MN
    4 days ago
  •  ...Job Description Job Description Lula is looking for a 1099 Handyman Pro to help with property maintenance of several thousand rental properties across the  St. Paul area . We are seeking individuals who have experience in the rental property industry and has an... 
    Suggested
    Hourly pay

    Lula

    Saint Paul, MN
    5 days ago
  • $25 - $30 per hour

    # Facilities Maintenance TechnicianGlenn Metalcraft Inc - Princeton, MN 55371## OverviewSalary Range$25.00 - $30.00 Hourly## DescriptionThe mission of the Facilities Maintenance Technician is to provide support to the Maintenance department and Elemet Group through general... 
    Suggested
    Hourly pay
    Work at office

    ELEMET GROUP

    Saint Paul, MN
    5 days ago
  •  ...Description Assignment: NSC Facilities Reports to: Assistant Operations Manager - Facilities & Events Job Duties and Responsibilities: • Greets and assists user groups andspectators • Demonstrates exceptional customer service by interacting with users... 
    Suggested
    Shift work
    Night shift
    Weekend work

    NATIONAL SPORTS CENTER FOUNDATION

    Blaine, MN
    4 days ago
  •  ...Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment...  ..., they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store... 

    The Home Depot

    Blaine, MN
    4 days ago
  • $20 - $24 per hour

     ...Job Description Job Description Clean Harbors in Roseville, MN is seeking a Hazardous Waste Technician to support the CleanPack and Treatment and Disposal business for your very own Ramsey County.     Clean Harbors is the leading provider of environmental... 
    Full time
    Local area

    Clean Harbors

    Saint Paul, MN
    10 days ago
  • $50k - $75k

     ...JOB DESCRIPTION Job Title: Facility & Building Technician Job Description The Facility & Building Technician ensures the safe, efficient, and...  ...facility operations, performs preventive and corrective maintenance, responds to service requests, and helps optimize... 
    Permanent employment
    Temporary work
    For contractors
    Work at office
    Local area
    Flexible hours
    Afternoon shift

    Actalent

    Saint Paul, MN
    3 days ago
  •  ...Job Description Job Description Responsible for performing repair and preventative maintenance to shop equipment and building facilities. Responsible for documenting all maintenance and repairs, keeping adequate parts stock and building supplies. Provides support to... 
    Contract work
    For subcontractor
    Shift work

    Fedtech, Inc.

    Saint Paul, MN
    23 days ago
  • $28 - $34 per hour

     ...Job Description Job Description Facilities Technician Saint Paul, MN | Direct Hire | $28-34/hr Konik is partnering with a growing commercial...  ...Metro. In this role, you will assist with preventative maintenance taskings related to plumbing, HVAC, and general building... 
    Hourly pay
    Temporary work
    For contractors

    Konik

    Saint Paul, MN
    8 days ago
  •  ...Job Description Job Description Maintenance Technician StoryPoint Woodbury Shift Information: Full-Time, 8am-5pm As a Maintenance Technician, you will be responsible for performing general maintenance and repair duties. This position requires the ability... 
    Full time
    Shift work

    StoryPoint

    Saint Paul, MN
    13 days ago
  • $29 - $39 per hour

    Job Description Job Description Bob Boldt HVAC is hiring a Lead Installer to take on our hardest installation and repair work. This role is for someone who has already put in real time in the field and can run a job from planning through closeout. Lead installers...
    Hourly pay
    Full time

    Bob Boldt HVAC,LLC

    Saint Paul, MN
    5 days ago
  •  ...Description Senior Building Automation Systems (BAS) / DDC HVAC Technician Location: Fort McCoy / Tomah, WI Employment Type: Full-...  ...actions Support Energy Managers with high energy-use facilities Troubleshoot BAS communication and network issues Maintain... 
    Full time
    Relocation package

    Gryphon Environmental LLC

    Saint Paul, MN
    26 days ago
  • Job Description Job Description Framing Carpenter, Residential New Construction Sites in Blaine MN and Otsego MN

    Premier Decks & Remodeling Llc

    Blaine, MN
    8 days ago
  •  ...value to the community. Role Description No on call emergency rotation! You work M-F with no nights or weekends. The Building Maintenance Technician is a full-time, on‑site role based in St Paul, MN. This position is responsible for performing routine and preventive... 
    Full time
    For contractors
    Local area
    Weekend work

    Yellow Tree

    Saint Paul, MN
    3 days ago
  • $17 - $17.5 per hour

    Warehouse Assembler | $17.00-$17.50/hr | 1st & 2nd Shift Start ASAP - Weekly Pay! Our client, a leading cosmetics manufacturer, is hiring Warehouse Assemblers to join their team in Blaine, MN . This is a great opportunity to get your foot in the door with a well...
    Hourly pay
    Weekly pay
    Full time
    Immediate start
    Monday to Friday
    Shift work
    Day shift
    Afternoon shift

    Manpower

    Blaine, MN
    2 days ago
  •  ...commercial plumbing services company committed to delivering fast, reliable, and professional plumbing solutions. With a team of expert technicians across the country, we take pride in exceptional workmanship, transparent pricing, and outstanding customer service. Join a... 
    Hourly pay
    Full time
    Part time
    Apprenticeship
    Local area

    Volarify

    Blaine, MN
    5 days ago
  •  ...Building Maintenance Technician As a Building Maintenance Technician, you’ll have the opportunity to work alongside the Maintenance Supervisor...  ..., troubleshoot, and repair equipment and ensure our facility remains safe, functional, and running smoothly. Troubleshoot... 
    Local area
    Shift work
    Night shift

    Running Aces Casino, Hotel & Racetrack

    Forest Lake, MN
    3 days ago
  • $30 - $32 per hour

     ...committed to investing in their growth and development. The Facilities Technician is responsible for managing the coordination, scheduling,...  ...short and long-range facility projects as well as the general maintenance, repair, and upkeep of our facility, including building... 
    Contract work
    For contractors
    Work at office
    Local area

    Nicolet Bank

    Saint Paul, MN
    5 days ago
  • $18 per hour

     ...surrounding Metro area. We specialize in custodial services, floor maintenance, landscaping, snow plowing, and more — all delivered with a...  ...Perform general cleaning of designated areas based on each facility’s specific needs Remove construction debris from buildings... 
    Flexible hours
    Weekend work

    Pk Property Services Llc

    Saint Paul, MN
    21 days ago
  • Aerotek - JobID: JP-005849335 [Production Operator / Assembly Line Worker] As a Manufacturing Associate at Aerotek, you'll: Operate assembly equipment and/or second-operation machines; Perform inspecting, trimming, testing, fixturing, assembling and packaging products;...
    Immediate start

    Aerotek

    Circle Pines, MN
    1 day ago
  • $15 - $16 per hour

    Assembler 1st Shift Corporate HeadQuarters - Blaine, MN 55449 Start Date 11/05/2026 Overview Salary Range $15.00 - $16.00 Hourly Position Type Full Time Job Shift Day Travel Percentage None Category Manufacturing Description Job Title: Assembler Schedule...
    Hourly pay
    Full time
    Contract work
    Work experience placement
    Local area
    Shift work
    Weekend work
    Day shift

    Caerus Corp

    Blaine, MN
    2 days ago
  • $23.5 per hour

     ...About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry.... 
    Extra income
    Contract work
    Temporary work
    Weekend work
    3 days per week

    Aerotek

    Blaine, MN
    13 hours ago
  • $25 - $32 per hour

     ...Building / Facility Maintenance Technician Join our team as a building / facility maintenance technician and enjoy a clean, climate-controlled environment. This role offers competitive pay and the opportunity to work with a family-owned business where your skills in... 
    Monday to Friday
    Flexible hours

    Twin City Staffing

    Saint Paul, MN
    3 days ago
  • Aerotek - - Responsibilities: Assemble blower units and related equipment from start to finish; Use hand and power tools, including drills, torque wrenches, and pneumatic tools; Read and follow blueprints, schematics, and work instructions; Complete sub-assemblies or full...

    Aerotek

    Blaine, MN
    2 days ago
  • Looking for All Around Commercial Carpenters to join our team: ~3+ years experience in commercial carpentry ~ Metal and wood framing ~ High end trim experience ~ Installing counters and cabinets ~ Siding and exterior trim ~ Decks ~ Flat Roofing experience...

    Tradewinds Support Partners, LLC

    Blaine, MN
    2 days ago
  • $35.65 - $42.55 per hour

     ...Department: Maintenance & Facilities Reports To: Maintenance Supervisor FLSA Status: Nonexempt Schedule: Multiple Shifts Available...  ...end of the range. Position Summary: The Maintenance Technician II independently performs preventive maintenance,... 
    Hourly pay
    Local area
    Monday to Friday
    Flexible hours
    Shift work
    Night shift
    Day shift
    Afternoon shift
    Early shift
    Weekday work

    Advanced Molding Technologies, LLC

    Circle Pines, MN
    5 days ago
  •  ...expert on the job site, responsible for diagnosing complex plumbing issues, overseeing installations and repairs, mentoring junior technicians, and ensuring all work meets state and local code requirements. This is a hands-on leadership role that blends technical... 
    Full time
    Part time
    Apprenticeship
    Local area

    Volarify

    Blaine, MN
    2 days ago
  •  ...onsite immediately. Production Assembly Technician The Production Technician is...  ...mature designs to factory production, and maintenance of existing designs. Responsibilities...  ...will be within a 30-mile radius of the facility. VIVA is an equal opportunity employer... 
    Contract work
    Immediate start
    Day shift

    VIVA

    Saint Paul, MN
    3 days ago
  •  ...Agriculture Products company, is looking for a Production Assembly Technician for their St Paul, MN location. Responsibilities: Component...  ..., transition of mature designs to factory production, and maintenance of existing designs Technical build assembly. Production... 

    ICONMA

    Saint Paul, MN
    1 day ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Facilities Maintenance Technician. Be the first to apply!