Controls Technician

Under general supervision, performs a wide variety of skilled duties in the design, development, installation, modification, maintenance and repair of industrial electrical and electronic control systems, plant control systems, RF and fiber optic-based telecommunication systems used in manufacturing systems and facilities; tests and calibrates a diverse range of electronic control system equipment, devices, and components; and performs related duties, as assigned. This role is located at our Kaiser Aluminum extrusion and tubular operation in Bellwood Virginia, just south of Richmond. In order to support our 24/7 plant you will work 12 hour shifts 2 days on, 3 days off, 2 days on, 2 days off, 3 days on. You will not rotate days to nights. Requirements What you will work on: Tests, troubleshoots, locates and calibrates, repairs and performs preventive maintenance on a variety of medium and low voltage industrial electrical and electronic systems, components and devices associated with manufacturing equipment, metals extrusion equipment, conveyor systems, and electrical and electronics in a manufacturing plant. Tests, troubleshoots, locates and calibrates, repairs and performs preventive maintenance on a variety of Vision systems used in production processes. Troubleshoots, aligns, and calibrates equipment; rebuilds equipment to manufacturer’s specifications. Installs, maintains, repairs, and replaces electromechanical, electronic, and electrical components of equipment and machinery. Develops and writes control programs for state of the art facilities; makes program modifications to various programmable logic controllers (PLC)(primarily Allen Bradley) and their operator interface terminals; corrects defects in instrumentation. Troubleshoots, repairs and programs remote terminal units, including the replacement of hardware components, circuit boards, power supplies, and electronic components. Performs preventive maintenance and repair of plant, field and shop electrical and electronic systems, components, devices and equipment, including hazardous chemical feed, storage systems, and leak detection equipment, laboratory equipment, flow stations, reservoirs, motors, pumps, and electrical-mechanical valves. Disconnects electrical sources (up to 12,000 volts), uses lockout/tagout procedures and current OSHA requirements; racks and un-racks up to 12kv breakers to lock out and perform maintenance, following appropriate safety procedures. Maintains inventory of electrical/electronic parts for equipment; checks pricing and availability of parts and submits purchase requests. Coordinates arc flash mitigation; works with electrical engineers to analyze and mitigate hazards; schedules utility outages with Dominion Power, makes corrections/modifications as recommended, and generates reports; updates and maintains file sharing database with latest studies, reports and changes to sites pertaining to arc flash hazard mitigation program. Tests solid state circuitry to locate defective parts in analog and digital equipment. Installs conduits, wires, pull boxes, switchboards, controllers and switches required in making additions, extensions or alterations in industrial electrical systems. Designs and modifies motor control equipment circuits, ladder logic, planning, laying out, and wiring the work. Reviews all plans for upgrade, installation, and construction projects; inspects projects for safety and code compliance; reads and interprets blueprints, complex wiring and control schematic diagrams; plans and lays out jobs from blueprints, drawings, sketches or verbal instructions; maintains records in the form of blueprints, plans and specifications for industrial electrical and instrumentation equipment, as well as radio telemetry and other related devices; schedules and coordinates activities with other sections and divisions. Researches new operational methods, techniques and equipment and recommends their application; performs proactive measures and make modifications to the control systems; corrects design or installation issues and makes improvements to match evolving/changing process conditions and control strategies. Replaces equipment and devices which have reached or exceeded their life span; retrofits and replaces obsolete equipment with upgraded equipment. Participates in developing annual plant budget for electrical and instrumentation needs. Responds to emergency situations as necessary, including after hours. May assist in training or instructing others in the work; provides safety training to others within the plant along with performing pre-job safety meetings with contractors and others outside of the plant. Observes and complies with all District and mandated safety rules, regulations, and protocols. Performs related duties, as assigned What you will bring to the role: A diverse range of communications protocols used in the industry. Methods and techniques of configuring communication between devices such as Programmable Logic Controllers (PLC), Remote Telemetry Units (RTU), and field devices. Experience with troubleshooting and repair of Vision systems. Principles, techniques and theory of radio telecommunication, radio wave propagation, test equipment, and tools used in installing, servicing, and repairing various electronic equipment. Practices, methods, techniques, tools and equipment used in the design, installation, testing, calibration, maintenance and repair of electrical and electronic equipment devices, and components, including those utilized in process control. Basic construction knowledge and experience with industrial power design, including medium and low voltage electrical power distribution, motor control, PLCs, VFDs, lighting systems, equipment layout, and related activities. Operating characteristics of electronic components, including programmable logic controllers, feedback devices, variable frequency drives and operator interface programs, microprocessor controls. Electrical and electronic shop procedures and practices. Scientific mathematics associated with process controls. Codes, ordinances and regulations pertaining to the work. Federal and state mandated safety rules, regulations, and protocols. Techniques for providing a high level of customer service by effectively dealing with the public, vendors, contractors, and staff. Modern equipment and communication tools used for business functions and program, project, and task coordination, including computers and software programs relevant to work performed. Ability to: Test, diagnose, program, modify, calibrate and repair a wide variety of electrical and electronic instrumentation devices, motors, machinery and equipment. Plan, organize, initiate, and complete engineering projects relating to Electronic instrumentation and systems controls. Use modern, state-of-the-art precision and diagnostic instruments to test, calibrate, and repair complex electrical and electronic devices and equipment. Work on or around hazardous chemical containment areas on dosing and metering equipment, leak detection equipment, and analyzers Acquire, interpret, and apply Materials Safety Data Sheets (MSDS) to identify hazards and select appropriate Personal Protective Equipment (PPE). Apply electronic theory, principles of electrical circuits, electrical testing procedures, engineering mathematics, physics, and related knowledge to layout, build, test, troubleshoot, and repair production equipment. Identify and implement effective courses of action to complete assigned work. Read and interpret plans, specifications and manuals. Coordinate work assignments with other divisions or departments. Operate and maintain scrubber and chlorine leak detector equipment, radio-based and fiber-optic telemetry and associated hardware and software equipment. Understand, interpret, and apply all pertinent laws, codes, regulations, policies, and procedures, and standards relevant to work performed. Effectively use computer systems, software applications relevant to work performed, and modern business equipment to perform a variety of work tasks. Communicate clearly and concisely, both orally and in writing, using appropriate English grammar and syntax. Establish, maintain, and foster positive and effective working relationships with those contacted in the course of work We are an equal opportunity employer. All applicants will be considered based on job-related qualifications and abilities. There shall be no discrimination on the basis of age, race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, veteran, or disability status. About Kaiser Aluminum: Talented people join our team because we are a company passionate about environmental sustainability, employee growth, contributing back to our communities and championing an inclusive culture. #J-18808-Ljbffr Kaiser Aluminum