Repair and Tool Technician
$18.5 per hourThe Home Depot
Job Description
Position Purpose:
Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $18.50
$18 per hour
...Job Description Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...SuggestedLocal area- ...Repair and Tool Technician | Home Depot Position Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures...Suggested
$29.57 - $41.68 per hour
...set up 5-Axis HAAS UMC-1000, including fixture installation and tool selection. Optimize machining parameters and make program edits... ...non-conformances. Conduct routine maintenance and minor repairs on machining equipment. Report equipment issues promptly and...SuggestedHourly pay$65k - $90k
...Plumbing & Drain Service, located in Catonsville, has been providing the greater Baltimore area with the best plumbing maintenance and repair services for more than 60 years. Catons has built a reputation in the Baltimore area as the emergency plumber of choice! Our...Suggested$40k - $60k
...Hiring Immediately - Wheel Repair Technician (Mobile) We are looking for motivated and detail-oriented individuals who thrive in a dynamic... ...~ Fun contests throughout the year ~ Company vehicle and tools provided ~ Paid training Wheel Repair Technician Responsibilities...SuggestedLocal areaImmediate startMonday to Friday$24 - $37 per hour
...Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action,... ...challenges, and properly securing all Johnson Controls tools and equipment at the end of each work period to prevent damage or...Hourly payTemporary workApprenticeship$27 - $33 per hour
...up, programming, and operating CNC machines to manufacture and repair precision components used in food processing and packaging equipment... ...standards Inspect finished parts using precision measuring tools (calipers, micrometers, gauges) Perform routine maintenance...Day shift$22.75 - $24.5 per hour
...preventative maintenance and lubrication - Complete minor equipment repairs and coordinate maintenance support as needed - Follow production... ..., work instructions, and quality requirements - Use measuring tools including micrometers, calipers, and gauges - Assist with...Hourly payMonday to FridayFlexible hoursShift workNight shiftDay shift$800 per month
...Automotive Tire Technicians ($800 New Hire Bonus) Start strong with NTB & Mavis: Eligible automotive tire technicians receive weekly... ...locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible...Hourly payWeekly payFull timeImmediate start$21 - $28 per hour
...and interpret blueprints and technical drawings with confidence Perform detailed inspections using calipers, gauges, and measuring tools Adjust machinery to ensure accuracy, efficiency, and consistent quality Troubleshoot minor issues and keep production running...Weekly payPermanent employmentFull timeTemporary workWork at officeLocal areaShift workDay shiftAfternoon shift- ...Mavis Tires & Brakes at Discount Prices - Automotive Alignment Technicians NTB is proud to join the Mavis Tire Family. We're looking... ...Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Ellicott City, MD area. With...Weekly payFull timeImmediate start
- ...that any positions are currently open or available at Costco. Position Summary: Balances, installs, and rotates tires. Stocks and repairs tires. For additional information about pay ranges, click here. We offer a comprehensive package of benefits including paid...Temporary work
$27 - $37 per hour
...Fire Protection Technician Johnson Controls, a global leader in thermal management, mission... ...systems, and backflows, including repair and internal inspections of systems. Follow... ...activities. Carry/move equipment and tools weighing up to 60 pounds. Perform work in...Hourly payImmediate startShift workWeekend work$39.02 per hour
...automatic sprinkler systems and associated equipment (i.e., air compressors, backflow devices, and valves). Will install, modify, and repair sprinkler systems using standard pipe schedule formulas per NFPA 13; inspect, test, and maintain water-based fire protection...Hourly payContract workFor contractorsWork at office$26 - $37 per hour
...representative and ascertain equipment/systems problems. Perform service and repairs on sprinkler systems for commercial, industrial and residential... ...physical labor to include carrying and moving equipment and tools weighing up to 70 lbs. ~ Able to work in unusual and...Hourly payFlexible hoursNight shift$27 - $37 per hour
...fire pumps-based fire sprinkler systems, and backflows, including repair and internal inspections of systems. Follow verbal and... ...specifications used in installation activities. Carry/move equipment and tools weighing up to 60 pounds. Perform work in unusual and sometimes...Hourly payImmediate startShift workWeekend work- ...commercial and retail service calls. Requirements: Must have own tools & transportation Strong experience with commercial locks,... ...Work: Commercial service calls (rekeys, lock installs/repairs, hardware) Flexible schedule, paid per job REQUIRED: At Least...For contractorsFlexible hours
- ...The responsibility of a Fire Sprinkler Technician is to successfully lay out, fabricate, assemble, install fire sprinkler systems, as well as maintain piping systems, fixtures, sprinklers and industrial processing systems. ESSENTIAL JOB DUTIES Install pipe systems and...Full timeTemporary workApprenticeshipWork experience placementWork at officeLocal areaFlexible hours
$50k
...design assistance, industrial construction, and maintenance service/repairs. Our state-of-the art prefabrication facilities total nearly 170... ...trades for seamless project execution. Manage materials, tools, and job costs to drive efficiency and productivity. Represent...Temporary workFor contractors$25 per hour
We are seeking an experienced Sheet Metal Mechanic with a background in architectural sheet metal installation , including standing seam roofing and exterior metal systems. This position focuses on commercial applications requiring precision, craftsmanship, and attention...Hourly pay- ...systems. Read plans to perform necessary work Perform layouts Perform take-offs Draw and measure tie-ins Maintains a complete set of tools Responsible for assets used on job site Holds a valid driver's license Make purchases at local supply houses according to Company...ApprenticeshipLocal areaNight shiftWeekend work
$24 - $37 per hour
...Installation employees are responsible for the installation, service, and repair of fire protection systems including wet, dry, pre-action,... ...challenges, and properly securing all Johnson Controls tools and equipment at the end of each work period to prevent damage or...Hourly payTemporary workApprenticeship- Our client is a manufacturing company. -Set up, operate and maintain CNC machinery including horizontal and vertical multi-axis machines -Read and interpret G code -Read and work with blueprints, drawings and instructions -Operate other machinery in the facility as needed...
- ...assignment and log out upon completion including quantity completed. Verify that all company and personal inspection equipment and tools being used are in calibration. Responsible for keeping the machine and the immediate area clean. Verify sufficient stock...Permanent employmentImmediate startShift workWeekend work
- ...DNC systems to support programming and machining operations. Help plan, estimate, and report on machining projects. Evaluate tooling tailored to specific job requirements, factoring in material properties, geometric features, tolerances, equipment capabilities, and...Permanent employmentFull timeFlexible hoursWeekend workAfternoon shift
$30 - $40 per hour
...jobs. Interpret engineering drawings, blueprints, CAD models, and customer specifications. Develop efficient machining strategies, tooling selections, and setup documentation. Set up and prove out new programs on CNC mills, making adjustments as needed to ensure quality...Temporary workDay shift$23 - $45 per hour
...Copper Craftsman who takes pride in precision work and traditional metal roofing techniques. What You’ll Do Fabricate, install, repair, and restore architectural sheet metal systems including copper, stainless steel, and coated metals Perform custom copper work...For contractorsLocal area- ...and operate CNC milling machines (primarily Haas) to perform precision machining operations. • Align and secure fixtures, cutting tools, attachments, accessories, and materials. • Monitor feed rates and spindle speeds during machining; make program edits as needed....Temporary work
$37.44k - $66.56k
...About the job Travel Heavy Duty Tire Technician Summary Only candidates with their own... ...is responsible for performing inspection, repair, and replacement of tires on heavy-duty vehicles... ...working with heavy-duty equipment and tools. Document services provided, including...Remote workFlexible hours- ...assignment and log out upon completion including quantity completed. Verify that all company and personal inspection equipment and tools being used are in calibration. Responsible for keeping the machine and the immediate area clean. Verify sufficient stock...Immediate startFlexible hoursShift workWeekend workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- skilled maintenance technician Halethorpe, MD
- hospital maintenance technician Halethorpe, MD
- hospital maintenance mechanic Halethorpe, MD
- maintainer Halethorpe, MD
- data center maintenance technician Halethorpe, MD
- pool repair technician Halethorpe, MD
- maintenance technician Halethorpe, MD
- repair technician Halethorpe, MD
- hotel maintenance technician Halethorpe, MD
- maintenance mechanic Halethorpe, MD



