Operating Engineer
$26.56 - $31.25 per hourCushman & Wakefield
Operating Engineer
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties
Essential Functions and Responsibilities
- Perform all plumbing, electrical, or HVAC requirements of the building(s)
- Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
- Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
- Verify field conditions and perform any necessary repairs or adjustments
- Monitor Energy Management
- Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
- Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
- Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
- Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
- Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
- Document and report activities to supervisor
- Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
- Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
- Complete all required C&W Safety Training as scheduled annually
- Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
Key Competencies
- Technical Proficiency
- Initiative
- Flexibility
- Multi-Tasking
- Sense of Urgency
Important Education
High School Diploma of GED Equivalent
Graduate of apprentice program or trade school preferred
Important Experience
5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
Additional Eligibility Qualifications
- Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
- May be required to have certification as a Universal Technician for CFC's depending on market licensure requirements
- Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable)
- Basic Computing Skills in Outlook, Excel & Word
- Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
- Knowledgeable in energy management systems, techniques and operations.
- Thorough knowledge in all building systems operations, maintenance and repair.
Work Environment
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
- Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine
- Involves movement between departments, floors, and properties to facilitate work
- Ability to speak clearly so others can understand you
- Ability to read and understand information presented orally and in writing
- Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics
Other Duties
This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation for the position is: $26.56 - $31.25
Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on click.appcast.io or email View email address on click.appcast.io. Please refer to the job title and job location when you contact us.
Cushman & Wakefield- ...to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Building Operating Engineer-JLL What this job involves: As a Building Operating Engineer at JLL, you'll be the technical expert responsible for...SuggestedDaily paidFor contractorsWork at officeMonday to Friday
- ...looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Senior Operating Engineer – JLL What this job involves: As a Senior Operating Engineer at JLL, you'll play a crucial role in maintaining and...SuggestedDaily paidFull timeFor contractorsWork at office
- ...Plant Engineering and Operations Talent - Building Envelope Manufacturing Requisition ID: 15092 Location: Remote, US, 60631 Pay Type: Salary Company Overview Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions...SuggestedLocal areaRemote workFlexible hours
- ...relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves: As a Operating Engineer at JLL, you will play a vital role in maintaining and monitoring building systems within our critical environments. Working...SuggestedDaily paidFor contractors
- ...This position provides technical leadership and support for the operation, maintenance and continuous improvement of the site's... ...*The following is *required* for this role:*** BS in Chemical Engineering, Electrical Engineering, or related Engineering field.* 10+ years...SuggestedLocal areaRelocation
- ...Job Title: Field Engineer Who You Are: You're a dynamic problem-solver with a passion for construction. Detail-oriented... ..., and accurate field measurements are utilized in Operations Plans execution and addresses discrepancies with Project Team...Temporary workFor subcontractor
- ...Network Engineer Primary Roles & Responsibilities: Network Installation and Configuration: Install, configure, and commission... ...to offer suggestions for improvements of overall organization operations. Takes personal ownership in organization's success....Full timeWork experience placement
$80k - $90k
...help us build a safer future. Department OverviewThe Field Engineer is responsible for the Implementation of complex communication... ...Perform preventative maintenance routines to ensure proper system operation with a focus on trend analysis and documentation of results...Contract workRemote workRelocation- ...strengthen our team across the globe. Join us as a Controls Project Engineer. The Opportunity: Location Type: The position is onsite in... ...specifications. Ensures the equipment being started up and commissioned operates in accordance with the customer requirements as outlined in the...Worldwide
- ...the US market, supporting continued nationwide growth through a strong focus on quality, efficiency, and operational excellence. Position Summary The Controls Engineer is responsible for the design, implementation, optimization, and support of automation and control...Ongoing contractFor contractors
- ...Summary/Objectives The Field Engineer serves as the lead installer on job sites, providing technical leadership, project execution,... ...including proper waste disposal and final site polish. Safely operate lifts, ladders, and tools; rig and lift heavy equipment using...For contractorsWork at officeLocal areaMonday to FridayNight shiftAfternoon shift
- ...will be located in the Nashville, TN area. Stago's Field Service Engineers provide exceptional technical support and superior customer... ...on-site training end users and laboratory personnel on proper operation, maintenance, and troubleshooting of instruments to enhance user...Contract workRemote workNight shift
- ...Controls Engineer Requisition ID: 16734 Location: Nashville, TN, US, 37214N. Prescott, AR, US, 71857Youngwood, PA, US, 15697... ...leveraging Inductive Automation’s Ignition SCADA platform to drive operational excellence and process stability in a continuous manufacturing...Full timeFor contractorsLocal areaFlexible hours
- ...Machinery Diagnostics Field Engineer/ Rotating Equipment Field Engineer Are you a Field Engineer looking for a new opportunity?... ...Diagnosing machinery problems based upon vibration data, operational data, and customer communications. Travel to customer sites...WorldwideOverseas
$50 - $65 per hour
...Job Title: Controls Engineer (Contract) Job Description This contract Controls Engineer role leads controls integration efforts... ...processing, packaging, and material handling systems, ensuring operational reliability, system performance, and continuous improvement in...Contract workTemporary workFor contractors- ...Controls Engineer This position is located in Bridgman, Michigan. Relocation Assistance will be provided for successful candidates... ...test, and integrate custom solutions to automate our customers' operations with a focus on solving unique challenges that others struggle...Temporary workLocal areaRelocation package
- ...( tirelessly work toward bettering the industries in which we operate. With practical solutions that are safe, innovative and sustainable... ..., governance and systems that are unparalleled in the engineering ( space. Are you looking for an opportunity to join a diverse...Local areaFlexible hours
- ...Corporate Project Engineer-Controls Our client, a leading Automotive Tier 1 manufacturer is looking for a Corporate Project Engineer... ...role in a small team with a major impact on manufacturing operations. The company is growing. Lots of opportunities for advancement...For contractorsWork at officeRemote work
$70.8k - $114.17k
...Industrial Water Process Engineer Arcadis' Industrial Water Treatment and Optimization (IWTO) team is seeking a mid-level Industrial... ...through design, construction, startup and commissioning, and operation and maintenance of treatment systems. This is a hybrid...Full timePart time$82.8k - $165k
...If you are a Field Service Engineering with boiler experience and looking for an opportunity to grow your career, Emerson has an exciting... ...tuning for Boiler or BOP processes. Work with plant operations teams, while at site, to ensure effective tuning of plant processes...Temporary workFor subcontractorLocal areaRemote workFlexible hours- ...First Merchants Bank is seeking a Security Automation Engineer to join ourteam! This position will be responsible for designing, engineering... ..., efficiently, and in alignment with regulatory and operational expectations. As part of this role you will: Remediation Automation...Flexible hours
- ...Partners GS Power Partners is a developer, financier, owner and operator of distributed generation (DG) commercial and industrial and... ...and long-term partnerships. Position Overview The Field Service Engineer is responsible for executing preventive maintenance (PM), corrective...Remote workLong distance
$35 - $40 per hour
...Special Projects Engineer – Tracker Control Systems Job Description The Special Projects Engineer plans and executes wind-stow and other tracker control enhancement projects across an operating fleet of plants. In this role, you act as the technical bridge between...Permanent employmentTemporary workInternshipRemote work- ...A growing engineering and automation solutions provider is seeking a Controls Engineer to support industrial automation and control system... ...control system hardware and software to meet process and operational requirements. Create electrical schematics, control system configurations...For subcontractor
$115k - $155k
...Ready to Power a Smarter World with us? The Senior Controls Engineer serves as the technical lead for advanced microgrid control system... ...through system development, commissioning, and ongoing operational support-while balancing hands-on technical execution with process...Temporary workWork experience placementRemote workFlexible hours- ...We are seeking a skilled Service Engineer with hands-on experience in lithium battery systems and inverter technologies. The candidate... ...energy storage solutions. Reports To: Service Manager / Operations Head Key Responsibilities Install, commission, and service lithium...Local areaRemote work
- ...Automation Engineering Manager (Technical Logistics Center – TLC) Location: Nashville, TN Overview Asurion is seeking a highly... ...Logistics Center (TLC) and Supply Chain Management (SCM) operations. This role goes beyond technical implementation — it requires...Contract workWork at office
$91.48k
...general direction, creates and signs off on basic to highly complex engineering designs involving site layout development, site grading and... ..., with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith Inc. and its...H1bLocal area- ...associated equipment to ensure the efficient, safe, reliable operation of the electric grid. They will be required to maintain, install... ...areas: substation design (including protection & control engineering); substation construction; substation commissioning; SCADA/Fault...Work at officeLocal area
$68k - $93k
...general direction, responsible for the design, configuration, and operation of complete building control systems—including fire, security,... ...in release meeting with project field team. Perform value engineering to provide cost‑effective results while maintaining customer satisfaction...Contract workFor contractorsWork experience placementFor subcontractor
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Operating Engineer. Be the first to apply!


