Saw Operator
The Gill Corporation
Saw Operator
The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products.
The Gill Corporation is seeking a Saw Operator who sets up and operates saw to cut panels and liners. Reporting to the Shipping Supervisor, they will perform, but not be limited to the following responsibilities.
- Reviews GPS and production order prior to cutting and makes set up accordingly.
- Pre-inspects products for quality imperfections.
- Checks dimensions using measuring tape and micrometers.
- Trims product according to GPS & production order.
- Counts and records product through-put by part number, and update ERP system with same.
- Sets material on the proper skids after cutting and transfers material to QC.
- Cleans up work area daily and "Clean-As-You-Go".
- Must be able to operate both manual and computer-controlled panel saws and related bar code equipment as needed.
- Must be available to work any shift, over-time and weekends
- Other essential duties may be assigned.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Sufficient English Skills – must be able to speak, read, write and understand all company documents
- One or two years of related material cutting/sawing experience and/or training.
- Forklift Certification a plus.
- Must have an acceptable Audiometry test.
- Must be able to lift, push and pull a minimum of 50 lbs.
PLEASE NOTE: Certain positions may require the ability to obtain and maintain a DOD Secret Clearance.
This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A "U.S. person" according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee.
The Gill Corporation is an Equal Opportunity Employer. Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances.
The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department
$22 per hour
...Now hiring for a Saw Operator Location: Santa Fe Springs, CA Pay Rate: $22.00 per hour Schedule: 1st Shift | 7 AM - 3:30 PM Training Schedule: 8 AM - 4:30 PM Put Your Saw Operator Skills in Gear. We've Got Work. Looking...SuggestedHourly payWeekly payImmediate startDay shift- ...Saw Operator American factories deserve a supply chain that moves as fast as they do. Nox Metals is building it, along with the tools that run it. We're a technology company supplying aluminum plate, bar, and rounds to aerospace and defense manufacturers. We use software...SuggestedFull timeLocal areaImmediate startShift work
$20 - $22 per hour
...Job Description Job Description Position Summary The Saw Operator is responsible for safely setting up and operating industrial saw equipment to cut raw materials to specified lengths and dimensions in support of manufacturing and assembly operations. This role...SuggestedFor contractorsWorldwide- ...Job Description Job Description Machine Saw Operator What You’ll Be Part Of This is a hands-on manufacturing role supporting the accurate and efficient processing of metal materials. You’ll operate industrial saw equipment to cut aluminum, steel, stainless steel...SuggestedAfternoon shift
$19.5 per hour
Description A Carpenter constructs, erects, installs, and repairs structures and fixtures of wood, metal, wallboard, etc., using carpenter's hand tools and power tools, and conforming to local building codes. While maintaining the necessary production and quality required...SuggestedHourly payFor contractorsApprenticeshipLocal area$20 - $23 per hour
...General Laborer – Saw Operator JOB-10047969 Anticipated Start Date November 19, 2026 Location Houston, TX Type of Employment Contract Hire Employer Info Our client is a global leader in electrical connection and protection. As...Full timeContract workLocal areaShift workDay shift$55.24 per hour
...been building more than projects—we've been building careers since 1949. As one of the nation's largest specialty contractors, we operate in key markets across the country, delivering high-quality work in exterior wall systems, drywall, metal framing, ceilings, and more...For contractors- Job Description Job Description A Framing Carpenter is responsible for building the skeletal structure of buildings and other constructions, ensuring accuracy and safety in measurements and assembly. This role requires proficiency in handling carpentry tools and materials...
$25 - $28 per hour
...Assist with wood framing, rough carpentry, finish carpentry, blocking, backing, and other carpentry-related tasks as needed. Operate hand tools and power tools safely and efficiently. Verify work complies with project specifications, quality standards, and safety...Weekly payContract workTemporary work- Job Description Job Description Local start up company is seeking hard working and dependable person in construction industry, training will be provide, basic knowledge of construction is required. Company Description Must be able to qualify for or have EVITP certification...Local area
- ...January 6, 2026 Job Type: Full-Time Schedule : 4/10- Monday-Thursday 7:00am-5:30pm Under the direction of a Water Distribution Operator III or Water Distribution Operator II, assists with the installation, repair and maintenance of the company's distribution system. *...Permanent employmentFull timeRelocation
- A construction firm in California seeks a Carpenter responsible for constructing and assembling concrete forming systems according to specifications. The ideal candidate should have at least 3 years of experience in bridge work and be proficient in reading blueprints. ...
- ...for advancement Signing bonus About the Role: American Pipeline Services in Monrovia, CA is looking for a skilled Heavy Equipment Operator to join our growing team. If you thrive in a hands-on environment and take pride in operating heavy machinery with precision and safety...Relocation package
$26 - $30 per hour
...Primary Responsibilities Operates wastewater system in compliance with applicable state and federal regulations. Troubleshoot technical and operational systems. Performs maintenance of wastewater systems. Perform assigned general housekeeping duties. Maintains...Local areaTrial period$28 - $35 per hour
Home Remodeling Carpenter The pay range for this position is $28 to $35 and is dependent on your experience as a professional carpenter. At Mr. Handyman we're growing our team of handyman professionals so we can continue to be one of the most well-respected home ...Work at officeImmediate start- ...repair walls, doors, windows, cabinets, stairs, and flooring Assemble and frame structures such as partitions and stairways Operate hand tools, power tools, and other construction equipment safely Ensure all work meets quality standards and project deadlines...Apprenticeship
- Requirements: Driver's License The Carpenter contributes to AHF by renovating spaces, rooms, offices and performing maintenance to AHF locations and properties. The Carpenter enhances the reputation of AHF by projecting professional conduct while performing remodeling...Flexible hours
- .... JOB DUTIES/RESPONSIBILITIES A Senior Carpenter assists in overseeing the overall carpentry, plastering, and concrete‑finishing operations in a designated Maintenance and Operations area. Some of the core duties will require that a job incumbent: Surveys sites, plans,...Permanent employmentFull timeContract workFor contractorsLocal areaTrial period
- ...drawings, and in using electrical and manual carpentry tools (e.g., saws, hammers, squares). Must be knowledgeable about OSHA guidelines... ...lead to accidents or errors. Additional Skills: Forklift operation skills are a plus but not required. Must be adaptable and able...Local areaImmediate start
- Application Instructions JT Wimsatt Contracting, Inc. was founded in 1992 with the desire to deliver projects with superior quality, on time and within budget for our clients. It is our mission to establish and maintain long-term relationships by providing service...ApprenticeshipWork at office
- The Middlesex Corporation is a nationally recognized and award‑winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely...Full timePart time
- ...projects on schedule. Maintain a clean, organized, and safe work area. Identify and report construction issues or discrepancies. Operate power tools and hand tools safely and efficiently. Deliver high-quality workmanship that meets luxury residential standards....Work from home
- ...orders Prepare worksite by setting up scaffolding, removing old siding, and ensuring proper surface preparation Use tools such as saws, drills, nail guns, and levels with precision Maintain clean and safe job sites Communicate effectively with crew leaders and...
- ...apprentices and new local workers. Follow safety procedures and understand DN Tanks safety policies. Plan safety into each operation and identify or remove hazards immediately as part of the task without being asked. Promote clean, safe work practices by watching...ApprenticeshipLocal areaImmediate start
- Job PostingSome U.S. state privacy laws offer their residents specific consumer privacy rights, which we respect as described in our privacy statement. To opt-out of our making available to third parties information relating to cookies and similar technologies for advertising...
$30 - $45 per hour
...with a passion for the trade, understands custom-home framing, and can effectively oversee crews and conduct day-to-day jobsite operations. Job Responsibilities Supervise and assist framing crews Complete daily work activities to keep projects on schedule Perform jobsite...Hourly payFull timeMonday to Friday$18 - $22 per hour
...Equipment Operator We are looking for a hard-working, reliable and safety minded individual to join our team as an Equipment Operator. As an Equipment Operator, you will be responsible for the safe and efficient operations of a heavy equipment to load and unload containers...Weekly payWork experience placementLocal areaMonday to Friday- ...conditions while maintaining consistent reveals. Translate architectural details and shop drawings into field-verified templates and custom components. Install premium architectural hardware, including mortise locks and concealed hinges, with flawless operation....
$20.5 - $22.5 per hour
..., including proper handling and application for various projects. Proficient in using common hand tools. Knowledge of operating a table saw and chop saw. Basic understanding of woodworking principles. Familiarity with sanding techniques for both wood and solid...Hourly payLocal areaShift work$22 per hour
...wood components such as frames, legs, bases, and other parts using standard carpentry techniques Operate woodworking machinery and hand tools, including table saws, miter saws, band saws, planers, and jointers, safely and accurately Install blocking, reinforcement...Hourly pay
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Saw Operator. Be the first to apply!


