Facility Engineering Technician III

Job Description

Job Description

LightEdge Solutions is developing the IT solutions that will propel businesses forward over the next 10 years. Using a combination of shared and private/dedicated platforms, LightEdge has been successful in offering businesses alternatives that streamline operations, improve reliability and reduce costs.

If you are passionate about creating real solutions that help businesses with cutting-edge technology, want to be challenged to think out of the box and be in a position where you can impact change on a daily basis, then LightEdge can offer you a dynamic corporate environment built on teamwork and personal responsibility.

The Facility Engineering Technician III is a senior, hands-on critical-facilities individual contributor and technical subject-matter expert for one or more electrical, mechanical, controls, or life-safety systems. This role independently operates, troubleshoots, and coordinates maintenance of 24x7 data-center infrastructure across one or more LightEdge sites.

The Technician III leads response to complex incidents, performs root-cause analysis, owns assigned systems and operating procedures, supports capacity and reliability planning, and drives improvements in safety, availability, efficiency, and documentation. This position does not necessarily have direct reports but provides technical direction, mentors lower-tier technicians, and may serve as a shift technical lead, incident lead, or system owner.

Critical Facilities Systems Scope:

Electrical infrastructure: Utility service; medium- and low-voltage distribution; switchgear and switchboards; transformers; automatic transfer switches; standby generators and fuel systems; UPS systems, batteries, and energy-storage systems; PDUs; RPPs; panelboards; branch circuits; grounding and bonding; EPMS; and associated monitoring and control systems.

Mechanical and cooling infrastructure: Chillers; chilled-water systems; CRAH, CRAC, RTU, and air-handling units; pumps; motors; variable-frequency drives; cooling towers or dry coolers; water treatment; leak detection; environmental controls; and associated piping, valves, and controls.

Life safety and facility-support systems: Fire alarm and fire suppression systems; emergency lighting; building automation systems; environmental monitoring; fuel monitoring; water detection; facility controls; and other systems required to maintain safe and reliable site operation.

Core Responsibilities:

• Conduct scheduled facility rounds and record operating conditions, equipment status, alarms, readings, abnormalities, and required follow-up actions.
• Monitor BMS, EPMS, DCIM, and other facility-monitoring platforms; investigate abnormal conditions and escalate issues in accordance with incident procedures.
• Operate and maintain mission-critical electrical, mechanical, cooling, fire/life-safety, building infrastructure automation controllers (JACE, WinG, Daikin ITM, eBox, etc.), and facility-support systems in accordance with approved procedures.
• Ensure compliance with regulatory, safety, and audit requirements in line with customer and company SLA standards.
• Perform preventive and corrective maintenance, equipment testing, repairs, and post-maintenance verification while protecting customer operations and system redundancy.
• Serve as technical lead during complex incidents, emergency events, loss-of-redundancy conditions, equipment failures, and abnormal operating scenarios.
• Lead or support root-cause analysis, corrective-action plans, post-incident reviews, and reliability improvements.
• Develop, review, execute, and close out MOPs, SOPs, EOPs, switching procedures, maintenance scripts, and other controlled operational documents.
• Serve as the technical owner for assigned facility systems, including equipment records, procedures, training, spare parts, maintenance history, and lifecycle planning.
• Identify single points of failure, capacity constraints, equipment deficiencies, operational risks, and opportunities to improve resilience and efficiency.
• Collaborate with engineering and projet teams on new builds and expnasions.
• Coordinate vendors and contractors, including scope review, job-safety documentation, permits, work execution, testing, punch-list completion, and closeout documentation.
• Manage assigned work requests and maintenance activities through the company CMMS or service-management platform, driving work to timely resolution.
• Maintain accurate one-line diagrams, sequences of operation, equipment records, asset data, configuration items in SNOW, maintenance history, as-built documentation, and site operating procedures.
• Support facility capacity planning, energy-efficiency initiatives, infrastructure optimization, and readiness for high-density customer deployments.
• Support construction, commissioning, integrated systems testing, equipment acceptance, punch-list completion, and operational turnover for new or modified facilities.
• Train and qualify Technician I and II employees on equipment operation, emergency procedures, safe work practices, and technical procedures.
• Participate in shift coverage, nights, weekends, holidays, on-call rotations, emergency response, and travel to other LightEdge sites as assigned

Safety, Compliance, and Work Control:

Perform all work in accordance with LightEdge safety policies, OSHA requirements, NFPA 70E practices, lockout/tagout procedures, PPE requirements, approved work permits, equipment-specific procedures, and applicable building, fire, environmental, and electrical codes.

• Identify and report unsafe conditions, procedural gaps, equipment hazards, and compliance risks.
• Follow approved work-control, change-management, risk-assessment, and peer-review processes before performing work that could affect critical operations.
• Support audits, inspections, emergency exercises, safety training, and corrective actions.

Minimum Qualifications:

 

• High school diploma or equivalent.
• Five or more years of experience in data-center operations, critical facilities, industrial facilities, hospitals, utilities, military facilities, or another mission-critical environment.
• Demonstrated experience operating and troubleshooting electrical, mechanical, HVAC, controls, or life-safety systems.
• Ability to work independently during routine operations and complex incidents while exercising sound technical judgment.
• Ability to read electrical one-lines, mechanical drawings, control diagrams, equipment manuals, and sequences of operation.
• Ability to work assigned shifts, weekends, holidays, on-call rotations, and emergency events as required by site operations.
• Ability to use CMMS, BMS, EPMS, DCIM, or similar operational systems.

Preferred Qualifications:

• Associate degree, technical degree, military training, trade-school certification, or equivalent practical experience.
• Advanced experience with UPS systems, generators, switchgear, ATS equipment, PDUs, RPPs, chillers, CRAH/CRAC units, pumps, motors, and building controls.
• Experience with Niagara, or similar BMS platforms and with EPMS or power-monitoring systems.
• NFPA 70E, OSHA, EPA 608, OEM, electrical, HVAC, controls, or stationary-engine certifications, as applicable to the assigned site.
• Experience supporting commissioning, integrated systems testing, design reviews, construction turnover, or high-density data-center deployments.

Physical and Work Environments Requirements:

• Ability to work in a 24x7 data-center environment that may include rotating shifts, extended hours, nights, weekends, holidays, and on-call assignments.
• Ability to walk, stand, climb stairs and ladders, reach, bend, kneel, crouch, work above shoulder level, and work in mechanical and electrical rooms.
• Ability to lift, carry, push, and pull equipment and materials within the limits established by the company’s approved job analysis and applicable accommodations process.
• Ability to work safely in areas with elevated noise, temperature variation, construction activity, PPE requirements, and energized or potentially energized equipment under approved safe-work practices.
• Ability to travel between LightEdge facilities as required for training, project support, incident response, or operational coverage.

Success Measures:

• Safe and reliable operation of assigned critical-facilities systems.
• Timely and accurate completion of preventive maintenance, work requests, operating logs, and technical documentation.
• Effective response, escalation, root-cause analysis, and corrective action for incidents and equipment abnormalities.
• High-quality execution and closeout of MOPs, EOPs, SOPs, vendor work, projects, and commissioning activities.
• Demonstrated development of lower-tier technicians and measurable improvements in reliability, readiness, safety, capacity, or efficiency.

General Position Statement:

This job description is intended to describe the general nature and level of work performed by employees in this role. It is not intended to be an exhaustive list of all duties, responsibilities, qualifications, or working conditions. Responsibilities may be adjusted based on business needs, site requirements, and applicable laws.

With over 20 years in business, LightEdge offers a full stack of best-in-class IT services delivering flexibility, security, and control. Our solutions include premier colocation across seven purpose-built data centers spanning Des Moines, IA, Kansas City, MO, Omaha, NE, Austin, TX, and Raleigh, NC, industry-leading private Infrastructure as a Service (IaaS) and cloud platforms, and the top global security and compliance measures. Our owned and operated facilities, integrated DR solutions, and premium compliant cloud choices make up a true Hybrid Cloud Solution Center. LightEdge annually undergoes third-party audits for ISO 20000-1, ISO 27001, HIPAA, PCI-DSS 3.2, and SSAE 18 SOC 1 Type II, SOC 2 Type II and SOC 3.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.