Local Shop Layout Pipe Fitter
$48 - $65 per hourMatrix Service Inc.
Job Description
Job Description
Job Summary:
Work under the direction of a Foreman. Lays out, installs, maintains, and repairs all types of piping systems for maintenance, tank and new construction. Individual must possess a high level of skill in the industrial maintenance/turnaround/construction/or mechanical environment.
Job Functions:
- Actively supports the Company’s commitment to safety and its “Core Values.”
- Always represents the Company with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
- Perform duties within a precise limit or standard of accuracy (Quality Control).
- Works well with peers, supervision and the QA/QC Department.
- Interprets drawings and sketches. Plans detail of working procedure and select materials in accordance with engineering standards.
- Lays out work; calculates dimensions; makes sketches of piping systems when needed.
- Sets up and operates bending, threading and cutoff equipment and uses hand tools or torch to shape, prepare and fabricate pipe for work to be done.
- Assembles and tests a variety of piping components.
- Set up for pipe to be welded or special type joints.
- Fastens hangers and supports.
- Handles or makes provision for the handling of materials, equipment and tools to and from job site in shop in connection with work.
- Make reports of work performed.
- Work within precise limits and standards of accuracy.
- Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Perform other responsibilities as required or assigned.
Qualifications:
- Minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience.
- A general knowledge of basic hand tools.
- Must be able to pass the Pipefitter Skills Test at or above 70% or complete the NCCER certification for your craft.
- Complete Company’s Safety training, Process Safety Management training and Client / Site specific training.
- Must be able to obtain and maintain an active status within the approved drug testing program.
- Must pass background check.
- TWIC & HHFT card
Verification of 8,000 craft related hours. Graduated journeyperson status preferred.
Physical Requirements:
- Employee will be standing, walking, bending, squatting and lifting.
- Must be able to hear, speak, understand and communicate effectively.
- May be required to lift, carry and move up to 50lbs.
- Will occasionally work at heights, climb ladders and stairways and work from platforms while utilizing proper fall protection and safety protocols.
- Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long periods of time, up to 12 hours a day.
- Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, the actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $48.00 to $65.00 per hour
Full range for this position, available over time: $48.00 to $65.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category
- ...about us: We're a design-forward, custom metal fabrication shop known for producing high-quality public infrastructure, urban design... ...or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees...Local areaMonday to FridayFlexible hoursShift work
$40 per hour
...laying out, fabricating, assembling, installing and maintaining piping and piping systems, fixtures and equipment for steam, hot water,... ...other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and...Local areaHourly payFull timeTemporary workFor contractorsWork experience placementFor subcontractorFlexible hoursShift work- ...Welder Position: Welder FLSA Status: Non-Exempt (Hourly) Reporting Relationships: Production Manager Shop Foreman Primary Purpose of this Position: Weld steel parts for structural, plate, and misc. steel assemblies per shop drawings and DWS quality requirements....SuggestedHourly payShift work
$90k - $120k
..., age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to...Local areaFor contractorsFor subcontractor- ..., age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to...Local areaFor contractorsShift workDay shift
$48 - $65 per hour
...G and 2” .344 GTAW 6G and/or .5 " FCAW). Looking for locals only no travel or per diem. Job Functions: Actively... ...the QA/QC Department. Select equipment and plan layout and assembly of welding. May weld pipe of all kinds, sizes and alloys by process of ARC,...Local areaHourly payDaily paidFull time$22.5 per hour
...discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $21.50...Local areaHourly payFull timeTemporary workPart time- ...using CATIA V5/V6. ~ Create and update setup sheets and tool layouts as required. ~ Interpret engineering drawings, GD&T, and... ...empennages. ~ Validate NC programs using Vericut and support shop-floor troubleshooting, prove-out, and process improvement. ~...
- ...efficient machine operation. Utilize advanced tool path and material removal techniques. Successfully simulate all programs to alleviate shop floor delays. Provide comprehensive Setup and Tool List documentation. Display ownership and exercise continuous improvement of...Permanent employmentWork at office
- ...with a valid Washington State Sprinkler Fitter Card , we'd love to connect with you.... ...fires sprinkler systems, as well as maintain piping systems, fixtures, sprinklers and... ...heights. Work Environment: Frequent local travel and occasional regional and non-regional...Local areaTemporary workApprenticeshipWork experience placementWork at officeFlexible hours
- ...properties. Key Responsibilities Install, repair, and maintain pipes, fixtures, water heaters, sump pumps, and other plumbing... ...tankless units) Detect and repair gas line issues in compliance with local codes and safety standards Collaborate with other...Local areaHourly payFull timePart timeApprenticeship
- ...Responsibilities Diagnose and repair complex plumbing systems including pipes, fixtures, water heaters, sump pumps, and sewer lines Lead... ...plumbers on job sites Ensure compliance with state, local, and municipal codes and safety regulations Pull permits and...Local areaPart timeApprenticeship
$23.81 - $32.21 per hour
...completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements High School Diploma or equivalent. Minimum of 1 year CNC operations...Local areaHourly pay$28 - $36 per hour
Description Tradesmen International is immediately hiring experienced CNC Lathe Machinists for projects located in or around Tacoma, WA . This is a first shift opportunity and the pay rate is $28-$36/hour based on experience and skill level. If you are a Machinist...Work at officeImmediate startDay shift$18 - $38 per hour
...protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination...Local areaPermanent employmentShift work$65k
...and F&I Managers regarding any potential delivery delays.Monitor shop workload to coordinate spot deliveries as needed.Lot Preparation... ...-member status, genetic information, or any other basis protected by applicable federal, state, or local laws. #J-18808-Ljbffr...Local areaFull timePart timeImmediate start$20 per hour
...the in-stock condition of assigned areas, and ensure it is clean, shop-able, and safe. Each associate has the responsibility of... ...gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $19.00 - $20.00...Local areaHourly payFull timeTemporary workPart timeImmediate start$28 - $36 per hour
Job Description Ready to Machine Precision into Every Part? Build the Future of Aerospace! Do you have a strong background in high-tolerance aerospace manufacturing and programming? American Workforce Group has partnered with a premier aerospace fabrication facility...Hourly payFull timeWork at officeMonday to Friday$32 - $40 per hour
Description Tradesmen International is immediately hiring experienced CNC Machinists for projects located in or around Tacoma, WA . This is a second shift opportunity and the pay range is $32-$40/hour based on experience and skill level. If you are a Machinist...Work at officeImmediate startAfternoon shift$50k - $90k
...license Ability to be available on-call when scheduled Preferred NICET or license Fire licenses may be required based on state or local regulations Benefits Cintas offers comprehensive and competitive medical, dental and vision benefits, with premiums below the...Local areaBase plus commission$17.5 - $20.6 per hour
...Associate Deliver friendly customer service, help customers shop our store, and find what they're looking for. Ensure all customers... ...Applicants in the U.S. must satisfy federal, state, and local legal requirements of the job. Michaels requires all team members...Local areaFlexible hoursNight shiftEarly shift$16 - $22 per hour
...1999, we founded Petco Love. Together, we support thousands of local animal welfare groups nationwide and have helped find homes for... ...friendly, helpful, and solution-focused service. Create positive shopping experiences that build trust and customer loyalty. Support...Local areaHourly payMinimum wageFlexible hoursNight shiftAfternoon shift$30 - $40 per hour
...CNC Machinist Job Description: PrideStaff is working with a local machining company who is in search of a CNC Machinist to join their... .... The ideal CNC Machinist has multiple years of machine shop leadership, solid knowledge of CNC Mill and/or Lathe Machines, basic...Local areaFull timeShift workDay shift- ...enthusiastic people who enjoy offering customers an exceptional shopping experience, we provide world-class customer service each and... ...want talented individuals to be part of this journey! Locally great and nationally strong, Albertsons Companies (NYSE: ACI) is...Local areaMinimum wageFlexible hours
- ...requirements of the service department, body shop, wholesale accounts and the do-it-yourself... ...departmental operations and storage layout and revises as needed for maximum effectiveness... ...of, and complies with federal, state and local regulations that may affect parts sales. 3...Local areaWork at officeImmediate start
$30 - $40 per hour
...identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable...Local areaFull timeShift workNight shiftWeekend workAfternoon shift$18 per hour
...Job Description Job Description A local Tower Crane company is looking to add a Crane Equipment Prep Worker to their team. Established... ...crane components for painting. • Minor repair and service of shop equipment and machines. • Ability to represent the Company in...Local areaTemporary workShift work$30 - $40 per hour
...of the RTCA family of companies, is a growing precision machine shop in Sumner, Washington, proudly serving aerospace, space, automotive... ...other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s...Local areaHourly payFull timeShift workWeekend work$40 - $45 per hour
...and machine speeds and feeds, according to knowledge of machine shop processes. Perform debugging and testing of CNC programs in the... ...other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative...Local areaHourly payFull timeShift work- ...enthusiastic people who enjoy offering customers an exceptional shopping experience, we provide world-class customer service each and... ...want talented individuals to be part of this journey! Locally great and nationally strong, Albertsons Companies (NYSE: ACI) is...Local areaMinimum wageFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Local Shop Layout Pipe Fitter. Be the first to apply!


