Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Cut Cone Assembler

$18.5 - $22.52 per hour

Hormann Northwest Door LLC

Job Description

Job Description

Department:         Production - Spring Shop

Position:                Non-Exempt

Salary:                    Hourly

Summary Description:  

Catch and paint springs for garage doors as they come from the oven cooling conveyer in a safe and efficient manner.  Cone the springs with a large drill motor and coning holder. Palletize the finished springs.

Essential Duties:  

  • Catch and paint the springs as they come off the oven cooling conveyer in a safe and efficient manner
  • Cut springs with cutting torch to needed length
  • Check the quality and length of the springs
  • Cone the springs with a large drill motor and coning holder palletize the finished springs
  • Band the completed finished springs to the pallet.
  • Label the springs
  • Close out the work orders via the computer as required.
  • Produce the springs at or above the set labor standards.
  • Maintain a clean and safe working area

  Essential Job Skills and Experience  

Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be:

  • High School Diploma or GED preferred 
  • Production experience preferred

Skills/Knowledge Required:  

  • Must be able to read a tape measure accurately
  • Ability to work independently and with a team
  • Ability to lift up to 50 lbs without assistance and more than 50 lbs using a team-lift
  • Ability to stand for extended periods of time
  • Ability to use a cutting torch
  • Good hand-eye coordination

Physical Environment/Working Conditions:

  This position involves standing, walking and lifting for long periods of time throughout the day. It requires grasping and fine manipulation on both hands.  The plant is not climate controlled.  Noise levels can become high.  NWD provides and requires hearing protection in the department.  The work is done in an area where moving mechanical machinery, parts or vibration are located.

 

Specific vision requirements:

This position requires close vision, distance vision, color vision, peripheral vision, depth vision and the ability to adjust focus.

Machines & Equipment Used:

Tape Measure, micrometer, drills, cutting torch, coning holder and assorted hand tools

The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level.

Who we are:

Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors.  We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member’s unique knowledge, skills, abilities, and efforts define our success as a company.

Hörmann is an Equal Opportunity Employer with a diverse employment environment.

Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work in an area that permits legalized use of marijuana for either medical or recreational purposes.

All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test.

  Job type: Full-time

Pay: $18.50 - $22.52

Benefits:

  • 401(k)
  • 401(k) matching
  • Dental Insurance
  • Health Insurance
  • Health Savings Account
  • Life Insurance
  • Paid time off
  • Tuition reimbursement
  • Vision Insurance

Schedule:

  • Day Shift / 2nd Shift
  • Monday to Friday
Vacancy posted 10 days ago
Similar jobs that could be interesting for youBased on the Cut Cone Assembler in Tacoma, WA vacancy
  • $20 - $24.58 per hour

     ...Hourly Summary Description   Operate machinery to cut and emboss foam panels for steel garage door sections. May be required...  ...Essential Duties   Obtain work orders and production schedule and assemble materials accordingly Process foam insulation as scheduled... 
    Suggested
    Hourly pay
    Full time
    Afternoon shift

    Hormann Northwest Door LLC

    Tacoma, WA
    6 days ago
  • $19 - $23.58 per hour

     ...Production Position:          Non-Exempt Salary:                    Hourly Summary Description:   Prepare track for assembly.  Cut and drill track for assembly according to production schedule.  May be required to perform functions of other jobs within the... 
    Suggested
    Hourly pay
    Full time
    Day shift

    Hormann Northwest Door LLC

    Tacoma, WA
    26 days ago
  • $20 - $25.15 per hour

     ...department. Essential Duties:   Performs beading and prepping of sections for glass insertion Arches designs with roll bender Cuts mullions with chop saw according to specified length Use coping machine to cut mullions to size Performs all finishing tasks... 
    Suggested
    Hourly pay
    Full time
    Monday to Friday
    Day shift

    Hormann Northwest Door LLC

    Tacoma, WA
    6 days ago
  •  ...We're seeking motivated individuals to join our team as Truss Assemblers in our Spanaway manufacturing facility.In this role, you'll be...  ...hand tools, pneumatic tools, and manufacturing equipment.Measure, cut, and prepare materials to exact specifications.Inspect products... 
    Suggested
    Hourly pay
    Immediate start

    Builders FirstSource

    Spanaway, WA
    3 days ago
  •  ...We take pride in delivering high-quality printed circuit board assemblies and electronic systems for customers in a variety of...  ...detail-oriented, motivated by quality, and enjoy working with cutting-edge electronics, we’d love to hear from you.  JBCSCSTMA06... 
    Suggested
    Work experience placement
    Immediate start

    JB Consulting Systems

    Federal Way, WA
    11 days ago
  • $22.5 - $24.5 per hour

     ...Job Title: Aerospace Product Assembler Job Description This position involves assembling components used in the production of aircraft and other aerospace products. It requires reading blueprints, following work instructions, and collaborating with leadership and supervisors... 
    Weekly pay
    Permanent employment
    Monday to Friday
    Day shift
    Afternoon shift

    Aerotek

    Tacoma, WA
    3 days ago
  •  ...Aerotek - - Responsibilities: Assemble aerospace components per production requirements; Read and interpret blueprints and work instructions; Operate hand and power tools for assembly; Assist with priority assemblies and training; Inspect assemblies for defects and test... 

    higher-hire.com

    Tacoma, WA
    1 day ago
  • $22.5 - $24.5 per hour

     ...Aerospace Assemblers Needed | Weekly Pay | Build Products Used in Aircraft Join an aerospace manufacturing team assembling components used in commercial and aerospace products while building valuable technical skills. Read blueprints, work instructions, and assembly... 
    Weekly pay
    Permanent employment
    Day shift
    Afternoon shift

    Aerotek

    Tacoma, WA
    2 days ago
  • $22.5 - $23.5 per hour

     ...SAXON AEROSPACE IS HIRING! We're looking for experienced Aerospace Assemblers - 2nd Shift to join our team for an exciting opportunity in aerospace manufacturing! Position: Assembler II - Aerospace Manufacturing Location: Tacoma, Washington Pay Rate:... 
    Full time
    Monday to Friday
    Shift work
    Afternoon shift

    Saxon Aerospace USA

    Tacoma, WA
    4 days ago
  • $30.83 - $35 per hour

     ...Paid Holiday, and bonus potential. All benefits on this page are subject to change.What Can I Expect In This Role?The Electrical Assembler will support AST by performing electrical assembly, testing and repairing industrial machinery. The primary responsibility of this... 
    Full time
    Temporary work
    Worldwide
    Flexible hours

    AST Inc

    Tacoma, WA
    4 days ago
  • $18.5 - $22.52 per hour

     ...Non-Exempt Salary:                     Hourly Reports to:              Production Supervisor Summary Description   Assembles precut steel garage door sections using hand and power tools.  May be required to perform functions of other jobs within the department... 
    Hourly pay
    Full time
    Monday to Friday
    Day shift

    Hormann Northwest Door LLC

    Tacoma, WA
    15 days ago
  • $18 - $20.42 per hour

     ...Non-Exempt Salary:                      Hourly Reports to:               Production Supervisor Summary Description:   Assembly of garage door sections on the 500 line.  May be required to perform functions of other jobs with the department or plant as needed... 
    Hourly pay
    Full time
    Day shift

    Hormann Northwest Door LLC

    Tacoma, WA
    11 days ago
  • Sailors in the Navy’s Construction Battalion are makers. They’re driven to work with their hands, and they know the value of doing a job right the first time. They’re tougher than any task and they’re not afraid to get a little dirty. If this sounds like you, then you ...
    Part time
    Overseas

    U.S. Navy

    Tacoma, WA
    3 days ago
  • $20 - $24 per hour

     ...quality requirements for completed product. For machine dependent operations, selects, aligns and secures holding fixtures and/or cutting tools, attachments, accessories and material to machines (i.e. set-up machine) and starts and observes machine operation during... 
    Hourly pay
    Full time
    Contract work
    Temporary work
    Work at office

    Sonaca

    Auburn, WA
    8 days ago
  •  ...RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact: An Aerospace Assembly Technician, you will support the Assembly team by participating in the assembly of precision aerospace components. Working closely... 
    Full time

    RTCA Inc

    Fife, WA
    22 hours ago
  • $24.42 per hour

    Order BuilderWe are hiring immediately for full time Order Builder positions.Location: Canteen - 5200 4th Street East, Fife, WA 98424. Note: online applications accepted only.Schedule: Full time schedule. Thursday through Monday; 12:00 pm to 8:30 pm. Further details upon...
    Hourly pay
    Full time
    Part time
    Work at office
    Local area
    Immediate start
    Remote work
    Flexible hours

    Compass Group

    Fife, WA
    3 days ago
  •  ...Aerotek - - Responsibilities: Perform aerospace assembly on sheet metal and titanium components; Carry out deburring operations to remove edges; Execute riveting and countersinking operations; Read and follow detailed instructions and blueprints; Use calipers, micrometers... 

    Aerotek

    Sumner, WA
    3 days ago
  •  ...Aerotek - - Responsibilities: Perform pre-assembly tasks such as drilling and deburring parts; Assemble component parts by installing ground studs, attaching nut plates, or bonding; Utilize hand and pneumatic tools for assembly tasks; Use measuring tools such as micrometers... 

    higher-hire.com

    Auburn, WA
    2 days ago
  •  ...design and production of structures, systems, and components for commercial, business, regional, and military aerospace clients. As an Assembler, you will perform pre-assembly tasks such as drilling and deburring parts, as well as assembling components by installing ground... 
    Contract work
    Temporary work
    Day shift
    Afternoon shift
    Early shift

    Aerotek

    Auburn, WA
    3 days ago
  •  ...Join our workshop in Federal Way, WA as a Mechanical Assembler Our winning team is built by continuous investment in skills development, leadership, and well-being. We have an opening at our Federal Way, WA facility as a Mechanical Assembler. This is a second shift position... 
    Local area
    Afternoon shift

    Valmet

    Federal Way, WA
    1 day ago
  • $24.42 per hour

    We are hiring immediately for full time ORDER BUILDER positions. Location : Canteen - 5200 4th Street East, Fife, WA 98424. Note: online applications accepted only. Schedule : Full time schedule. Thursday through Monday; 12:00 pm to 8:30 pm. Further details...
    Hourly pay
    Full time
    Part time
    Work at office
    Local area
    Immediate start
    Remote work
    Flexible hours

    Compass Group

    Fife, WA
    4 hours ago
  • $20 - $23 per hour

     ...Assembly Technician An Aerospace Assembly Technician, you will support the Assembly team by participating in the assembly of precision aerospace components. Working closely with Manufacturing Engineering and Assembly personnel, you will develop tooling solutions that... 
    Full time
    Local area
    Shift work

    RTC Aerospace LLC

    Fife, WA
    1 day ago
  • $24.75 - $28.25 per hour

     ...SEKISUI Aerospace Job Description Assembler I, 2nd Shift Job Description Join us as we look to the future! We are currently accepting applications for an upcoming Assembler I, 2nd Shift need at our Sumner location. SEKISUI Aerospace strives to provide... 
    Permanent employment
    Full time
    For contractors
    Local area
    Immediate start
    Shift work
    Afternoon shift

    Sekisui Aerospace

    Sumner, WA
    3 days ago
  • $22 - $23 per hour

     ...Job Title: Assembler Job Description Join a leading company in aerospace manufacturing, specializing in the design and production of structures, systems, and components for commercial, business, regional, and military aerospace clients. As an Assembler, you will... 
    Weekly pay
    Contract work
    Temporary work
    Day shift
    Afternoon shift
    Early shift

    Aerotek

    Auburn, WA
    1 day ago
  • $22 - $27 per hour

     ...Job Title: Assembler Job Description This role focuses on precision aerospace assembly and sheet metal work, including deburring, riveting, and countersinking of metal and titanium components. You will use a variety of hand tools and measuring instruments to... 
    Weekly pay
    Contract work
    Temporary work
    Day shift

    Aerotek

    Sumner, WA
    1 day ago
  •  ...Assembler 1 Division: Distribution Job Location: Auburn, WA Looking for stability? Join Woodgrain! We're growing fast and offering lifetime careers in a supportive work environment. About Woodgrain: Woodgrain is one of the top millwork... 
    Temporary work
    Flexible hours

    Woodgrain

    Auburn, WA
    3 days ago
  • $25 per hour

    Job Description Job Description As an AeroBarrier Installer, you will be responsible for the professional installation of AeroBarrier, an innovative air sealing technology designed to improve energy efficiency and indoor air quality in residential and commercial...
    Hourly pay
    Temporary work
    For contractors
    Monday to Friday

    Installed Building Products LLC

    Tacoma, WA
    24 days ago
  • $25 - $30 per hour

     ...RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact:  The Sr. Assembly Technician performs the organization's most complex and highest-risk assembly operations with expert-level precision, serving as... 
    Hourly pay
    Full time
    Local area
    Shift work

    RTCA

    Fife, WA
    19 days ago
  •  ...Second Shift Mechanical AssemblerJoin our workshop in Federal Way, WA as a Second Shift Mechanical Assembler. Our winning team is built by continuous investment in skills development, leadership, and well-being. We have an opening at our Federal Way, WA facility as a Mechanical... 
    Afternoon shift

    Valmet

    Federal Way, WA
    4 days ago
  •  .... Essential Duties and Responsibilities: Perform drilling, reaming, countersinking, set up, riveting, bonding, and other assembly duties using hand and power tools. Perform tool set-ups as required by specifications, utilizing work orders and documents.... 
    Permanent employment
    Work at office

    Orion Industries

    Auburn, WA
    2 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Cut Cone Assembler. Be the first to apply!